1SS356_1

1SS356 Diodes Band switching diode 1SS356 Applications High frequency switching Dimensions (Unit : mm) 1.25±0.1 0.1±0.1 　　　 0.05 Land size figure (Unit : mm) 0.9MIN. 1.7±0.1 2.5±0.2 Features 1) Small mold type. (UMD2) 2) High reliability. 0.8MIN. U MD2 Construction Silicon epitaxial planar 0.3±0.05 0.7±0.2 　　　 0.1 Structure ROHM : UMD2 JEDEC : S0D-323 JEITA : SC-90/A dot (year week factory) Taping specifications (Unit : mm) 4.0±0.1 2.0±0.05 φ1.55±0.05 1.75±0.1 0.3±0.1 3.5±0.05 8.0±0.2 1.40±0.1 4.0±0.1 φ1.05 1.0±0.1 Absolute maximum ratings (Ta=25°C) Param eter Forward current (DC) Revers e voltage (DC) Junction tem perature Storage tem perature S ym bol IF VR Tj Ts tg Lim its 100 35 125 -55 to ＋ 125 2.75 Unit mA V ℃ ℃ Electrical characteristics (Ta=25°C) Parameter Symbol VF Forward voltage IR Reverse current Capacitance between terminals Ct Forward operating resistance rf Min. - Typ. - Max. 1.0 10 1.2 0.9 Unit V nA pF Ω Conditions IF=10mA VR=25V VR=6V , f=1MHz IF=2mA , f=100MHz Rev.C 2.8±0.1 2.1 1/3 1SS356 Diodes Electrical characteristics curves (Ta=25°C) 100 10 Ta=75℃ REVERSE CURRENT:IR(nA) Ta=125℃ Ta=25℃ Ta=-25℃ 1 0.1 Ta=125℃ 10 f=1MHz CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=75℃ FORWARD CURRENT:IF(mA) 10 1 Ta=25℃ 0.01 Ta=-25℃ 0.001 1 0.1 0.01 0.001 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 FORWARD VOLTAGE：VF(V) VF-IF CHARACTERISTICS 0.0001 0 10 20 30 40 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 50 0.1 0 5 10 15 20 25 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 30 10 FORWARD VOLTAGE:VF(mV) f=100MHz FORWARD OPERATING RESISTANCE:rf(Ω) 850 840 830 820 810 800 0.1 1 FORWARD CURRENT:IF(mA) rf-IF CHARACTERISTICS 10 VF DISPERSION MAP Ta=25℃ IF=10mA n=30pcs 0.1 0.09 REVERSE CURRENT:IR(nA) 0.08 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 Ta=25℃ VR=25V n=30pcs 1 AVE:0.833V AVE:0.0116nA 0.1 0.01 IR DISPERSION MAP 1 0.9 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Ct DISPERSION MAP AVE:0.807pF PEAK SURGE FORWARD CURRENT:IFSM(A) Ta=25℃ VR=6V f=1MHz n=10pcs 20 5 Ifsm 1cyc 8.3ms RESERVE RECOVERY TIME:trr(ns) 4 3 2 1 AVE:1.20ns 0 IFSM DISRESION MAP trr DISPERSION MAP Ta=25℃ VR=6V IF=10mA RL=100Ω Irr=0.1*IR n=10pcs 15 10 5 AVE:5.60A 0 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 PEAK SURGE FORWARD CURRENT:IFSM(A) PEAK SURGE FORWARD CURRENT:IFSM(A) FORWARD OPERATING RESISTANCE:rf(Ω) Ta=25℃ f=100MHz IF=2mA n=10pcs 10 9 8 7 6 5 4 3 2 1 0 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 Ifsm 8.3ms 8.3ms 1cyc 100 Ifsm t 10 AVE:0.602Ω 1 0.1 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 FORWARD CURRENT:IF(mA) rf DISPERSION MAP Rev.C 2/3 1SS356 Diodes 1000 Rth(j-a) TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) ELECTROSTATIC DDISCHARGE TEST ESD(KV) 10 9 8 7 6 5 4 3 2 1 0 10 TIME:t(s) Rth-t CHARACTERISTICS 0.1 1000 C=200pF R=0Ω C=100pF R=1.5kΩ AVE:0.88kV AVE:6.63kV 100 Rth(j-c) Mounted on epoxy board 10 IM=10mA IF=100mA 1ms t ime 300us 1 0.001 ESD DISPERSION MAP Rev.C 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0