1SS400_1

1SS400 Diodes Switching diode 1SS400 Applications High speed switching Dimensions (Unit : mm) 0.8±0.05 0.12±0.05 Land size figure (Unit : mm) 0.8 1.2±0.05 1.6±0.1 Features 1) Ultra small mold type. (EMD2) 2) High reliability. 0.6 EMD2 Construction Silicon epitaxial planar 0.3±0.05 Structure 0.6±0.1 ROHM : EMD2 JEDEC :SOD-523 JEITA : SC-79 dot (year week factory) Taping dimensions (Unit : mm) 4.0±0.1 2.0±0.05 φ1.5±0.05 0.2±0.05 3.5±0.05 1.75±0.1 8.0±0.15 1.3±0.06 0 1.26±0.05 0 0.2 0.76±0.05 2.45±0.1 φ0.5 0.95±0.06 0 空ポケット 4.0±0.1 2.0±0.05 Absolute maximum ratings (Ta=25°C) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Forward voltage (repetitive peak) Average rectified forward current Surge current （t=1s） Junction temperature Storage temperature Symbol VRM VR IFM Io Isurge Tj Tstg Limits 90 80 225 100 500 125 -55 to +125 Unit V V mA mA mA ℃ ℃ Electrical characteristics (Ta=25°C) Param eter Forward voltage Revers e current Capacitance between term inal Revers e recovery tim e S ym bol VF IR Ct trr Min. Typ. Max. 1.2 0.1 3 4 Unit V µA pF ns IF =100m A VR =80V VR =0.5V , f=1MHz VR =6V , IF=10m A , RL=100 Ω Conditions 0.6 Rev.D 1.7 1/2 1SS400 Diodes Electrical characteristic curves (Ta=25°C) 100 Ta=75℃ FORWARD CURRENT:IF(mA) REVERSE CURRENT:IR(nA) 10000 1000 100 10 100000 10 Ta=125℃ CAPACITANCE BETWEEN TERMINALS:Ct(pF) f=1MHz 10 Ta=125℃ Ta=25℃ Ta=75℃ 1 Ta=-25℃ Ta=25℃ 1 0.1 Ta=-25℃ 1 0.1 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 FORWARD VOLTAGE：VF(V) VF-IF CHARACTERISTICS 0.1 0 20 40 60 80 100 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 120 0 5 10 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 15 950 FORWARD VOLTAGE:VF(mV) REVERSE CURRENT:IR(nA) 940 930 920 910 900 VF DISPERSION MAP Ta=25℃ IF=100mA n=30pcs 100 80 60 40 AVE:12.47nA 20 0 Ta=25℃ VR=80V n=30pcs 1 0.9 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 AVE:0.698pF Ta=25℃ VR=0.5V f=1MHz n=10pcs AVE:930.3mV IR DISPERSION MAP Ct DISPERSION MAP 20 RESERVE RECOVERY TIME:trr(ns) PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm 15 8.3ms 10 AVE:4.05A 5 1cyc 5 4 3 2 1 0 IFSM DISPERSION MAP trr DISPERSION MAP PEAK SURGE FORWARD CURRENT:IFSM(A) Ta=25℃ VR=6V IF=10mA RL=100Ω Irr=0.1*IR n=10pcs AVE:1.20ns 100 10 1 Ifsm 8.3m 8.3m 1cyc 0 0.1 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 100 TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) PEAK SURGE FORWARD CURRENT:IFSM(A) 1000 Rth(j-a) 10 9 ELECTROSTATIC DISCHARGE TEST ESD(KV) 8 7 6 5 4 3 2 1 0 C=200pF R=0Ω C=100pF R=1.5kΩ AVE:1.58kV AVE:6.43kV 10 100 Rth(j-c) Mounted on epoxy board IM=1mA IF=10mA time 1 Ifsm t 10 1ms 300us 0.1 0.1 TIME:t(ms) IFSM-t CHARACTERISTICS 1 10 100 1 0.001 0.01 TIME:t(s) Rth-t CHARACTERISTICS 0.1 1 10 100 1000 ESD DISPERSION MAP Rev.D 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0