2SB1565FU6E

2SB1565 Transistors For Power Amplification (−60V, −3A) 2SB1565 zStructure PNP Silicon Epitaxial Planar Transistor zExternal dimensions (Unit : mm) TO-220FN 4.5 φ3.2 8.0 2.8 1.2 1.3 14.0 5.0 15.0 zFeatures 1) Low VCE (sat). 2) Excellent electrical characteristics of DC current Gain hFE. 3) Wide SOA. 12.0 10.0 0.8 (1)Base 2.54 (2)Collector 2.54 0.75 2.6 (1) (2) (3) (3)Emitter zApplications Low frequency power amplifier Stereophonic output Stabilization of power supply zComplements zAbsolute maximum ratings (Ta=25°C) Package Limits Unit Collector-base voltage VCBO −60 V Collector-emitter voltage VCEO −60 V Emitter-base voltage VEBO −7 V DC IC −3 A Pulse ICP −6 A 2 W(Ta=25°C) 25 W(Tc=25°C) Collector current Collector power dissipation NPN 2SD2394 zPackaging specifications and hFE Symbol Parameter PNP 2SB1565 PC Junction temperature Tj 150 °C Storage temperature Tstg −55 to +150 °C hFE 2SB1565 ∗1 Taping − Code Type Basic ordering unit (pieces) 500 EF hFE values are classified as follows: Item hFE E 100 to 200 F 160 to 320 ∗1 Pw=100ms, non repetitive pulse zElectrical characteristics (Ta=25°C) Parameter Symbol Min. Typ. Max. Unit Collector-emitter breakdown voltage BVCEO −60 − − V Collector-base breakdown voltage BVCBO −60 − − V IC=−50µA Emitter-base breakdown voltage BVEBO −7 − − V IE=−50µA Collector cutoff current ICBO − − −10 µA VCB=−60V Emitter cutoff current IEBO − − −10 µA VEB=−7V VCE(sat) − − −1.5 V IC/IB=−2A/−0.2A ∗1 VCE=−5V, IC=−0.5A ∗1,2 Collector-emitter saturation voltage DC current gain Transition frequency Collector output capacitance hFE 100 − 320 fT − 15 − Cob − 50 − − Conditions IC=−1mA MHz VCE=−5V, IE=0.5A, f=5MHz pF ∗1 VCB=−10V, IE=0A, f=1MHz ∗1 Single pulse ∗2 hFE rank 1/1 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1