2SC2412K

Transistors 2SC2412K / 2SC4081 / 2SC4617 / 2SC5658 / 2SC1740S General purpose transistor (50V, 0.15A) 2SC2412K / 2SC4081 / 2SC4617 / 2SC5658 / 2SC1740S Features 1) Low Cob. Cob=2.0pF (Typ.) 2) Complements the 2SA1037AK / 2SA1576A / 2SA1774H / 2SA2029 / 2SA933AS. Dimensions (Unit : mm) (1) 2SC2412K 2SC4081 (1) 2SC4617 0.65 0.65 (2) 0.95 0.95 1.9 1.3 2.0 (1) (2) 0.2 0.5 0.5 (3) 0.4 (3) 0.3 1.6 2.8 2.1 0.8 0.2 0.15 1.6 0.7 0.9 0.15 0.2 1.25 0.3 (3) 0.55 0.15 0.8 1.1 0~0.1 0.3Min. Structure Epitaxial planar type NPN silicon transistor Each lead has same dimensions ROHM : SMT3 EIAJ : SC-59 JEDEC : SOT-346 (1) Emitter (2) Base (3) Collector 0~0.1 0.1Min. 0.1Min. Each lead has same dimensions ROHM : UMT3 EIAJ : SC-70 JEDEC : SOT-323 (1) Emitter (2) Base (3) Collector 0~0.1 ROHM : EMT3 (1) Emitter (2) Base (3) Collector EIAJ : SC-75A JEDEC : SOT-416 Abbreviated symbol: B* Abbreviated symbol: B* Abbreviated symbol: B* 2SC5658 0.2 1.2 0.8 (2) (3) (1) 2SC1740S 4±0.2 2±0.2 3±0.2 0.2 1.2 0.32 0.4 0.4 0.8 0.22 (15Min.) 0.13 0~0.1 0.5 0.45+0.15 −0.05 0.15Max. 5 3Min. 2.5 +0.4 −0.1 0.5 +0.15 0.45 −0.05 (1) (2) (3) ROHM : VMT3 (1) Base (2) Emitter (3) Collector ROHM : SPT EIAJ : SC-72 (1) Emitter (2) Collector (3) Base Abbreviated symbol: B* * Denotes hFE Absolute maximum (Ta=25°C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current 2SC2412K, 2SC4081 Collector power 2SC4617, 2SC5658 dissipation 2SC1740S Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC Limits 60 50 7 0.15 0.2 PC 0.15 0.3 Tj Tstg 150 −55 to +150 °C °C W Unit V V V A 0.7 1.0 1.6 (2) Rev.A 1/3 Transistors Electrical characteristics (Ta=25°C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current DC current transfer ratio Collector-emitter saturation voltage Transition frequency Output capacitance Symbol BVCBO BVCEO BVEBO ICBO IEBO hFE VCE(sat) fT Cob Min. 60 50 7 − − 120 − − − Typ. − − − − − − − 180 2 2SC2412K / 2SC4081 / 2SC4617 / 2SC5658 / 2SC1740S Max. − − − 0.1 0.1 560 0.4 − 3.5 Unit V V V µA µA − V MHz pF IC=50µA IC=1mA IE=50µA VCB=60V VEB=7V Conditions VCE=6V, IC=1mA IC/IB=50mA/5mA VCE=12V, IE=−2mA, f=100MHz VCE=12V, IE=0A, f=1MHz Packaging specifications and hFE Package Code Type 2SC2412K 2SC4081 2SC4617 2SC5658 2SC1740S hFE QRS QRS QRS QRS QRS − − − − − − − − − − Basic ordering unit (pieces) T146 3000 T106 3000 − Taping TL 3000 − − T2L 8000 − − − TP 5000 − − − − hFE values are classified as follows : Item hFE Q 120 to 270 R 180 to 390 S 270 to 560 Electrical characterristic curves 50 100 VCE=6V COLLECTOR CURRENT : IC (mA) Ta=25°C COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) 20 10 5 Ta=100°C 25°C −55°C 80 0.50mA mA 0.45 A 0.40m 0.35mA 0.30mA 10 Ta=25°C 30µA 27µA 24µA 21µA 8 60 0.25mA 0.20mA 6 18µA 15µA 12µA 9µA 6µA 3µA 2 1 0.5 0.2 0.1 0 40 0.15mA 0.10mA 4 20 0.05mA IB=0A 0 0.4 0.8 1.2 1.6 2.0 2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 BASE TO EMITTER VOLTAGE : VBE (V) 0 0 4 8 IB=0A 12 16 20 COLLECTOR TO EMITTER VOLTAGE : VCE (V) COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.1 Grounded emitter propagation characteristics Fig.2 Grounded emitter output characteristics ( Ι ) Fig.3 Grounded emitter output characteristics ( ΙΙ ) Rev.A 2/3 Transistors 2SC2412K / 2SC4081 / 2SC4617 / 2SC5658 / 2SC1740S 500 Ta=100°C VCE=5V 3V 1V COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) 500 Ta=25°C VCE=5V 0.5 Ta=25°C DC CURRENT GAIN : hFE 200 DC CURRENT GAIN : hFE 200 25°C −55°C 0.2 IC/IB=50 20 10 100 100 0.1 0.05 50 50 0.02 20 10 0.2 20 10 0.2 0.5 1 2 5 10 20 50 100 200 0.5 1 2 5 10 20 50 100 200 0.01 0.2 0.5 1 2 5 10 20 50 100 200 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) Fig.4 DC current gain vs. collector current ( Ι ) Fig.5 DC current gain vs. collector current ( ΙΙ ) Fig. 6 Collector-emitter saturation voltage vs. collector current COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) 0.5 COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) IC/IB=10 0.5 TRANSITION FREQUENCY : fT (MHz) IC/IB=50 Ta=100°C 25°C −55°C 500 Ta=25°C VCE=6V 0.2 Ta=100°C 25°C −55°C 0.2 0.1 0.05 0.1 0.05 200 0.02 100 0.02 0.01 0.2 0.5 1 2 5 10 20 50 100 0.01 0.2 0.5 1 2 5 10 20 50 100 200 50 −0.5 −1 −2 −5 −10 −20 −50 −100 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) EMITTER CURRENT : IE (mA) Fig.7 Collector-emitter saturation voltage vs. collector current ( Ι ) Fig.8 Collector-emitter saturation voltage vs. collector current (ΙΙ) Fig.9 Gain bandwidth product vs. emitter current COLLECTOR OUTPUT CAPACITANCE : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF) 20 BASE COLLECTOR TIME CONSTANT : Cc·rbb' (ps) 10 Cib Ta=25°C f=1MHz IE=0A IC=0A 200 Ta=25°C f=32MHZ VCB=6V 100 5 50 2 Co 20 b 1 0.2 0.5 1 2 5 10 20 50 10 −0.2 −0.5 −1 −2 −5 −10 COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V) EMITTER CURRENT : IE (mA) Fig.10 Collector output capacitance vs. collector-base voltage Emitter input capacitance vs. emitter-base voltage Fig.11 Base-collector time constant vs. emitter current Rev.A 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0