General purpose small signal amplifier (50V, 0.15A)
2SC4617EB
Features 1) Excellent hFE linearity. 2) Complements the 2SA1774EB. Structure NPN silicon epitaxial planar transistor Dimensions (Unit : mm)
EMT3F
1.6 0.26
1.6 0.86 0.37
0.7
0.45
(3)
(1) 0.5 0.5 1.0
(2) 0.13
(1) Base (2) Emitter (3) Collector ∗ = Denotes hFE
Each lead has same dimensions
Abbreviated symbol : B
∗
Absolute maximum (Ta=25C)
Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Power dissipation Junction temperature Range of storage temperature
∗1 Pw=1ms Single pulse ∗2 Each terminal mounted on a recommended land
Symbol VCBO VCEO VEBO IC ICP PD Tj Tstg
∗1 ∗2
Limits 60 50 7 150 200 150 150 −55 to +150
Unit V V V mA mW °C °C
Electrical characteristics (Ta=25C)
Parameter Collector-emitter breakdown voltage Collector-base breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current gain Transition frequency Output capacitance Symbol BVCEO BVCBO BVEBO ICBO IEBO VCE(sat) hFE fT Cob Min. 50 60 7 − − − 120 − − Typ. − − − − − − − 180 2 Max. − − − 100 100 400 390 − 3.5 Unit V V V nA nA mV − MHz pF IC=1mA IC=50μA IE=50μA VCB=60V VEB=7V IC/IB=50mA/5mA VCE=6V, IC=1mA VCE=12V, IE=−2mA, f=100MHz VCE=12V, IE=0A, f=1MHz Conditions
hFE rank categories
Rank hFE Q 120 to 270 R 180 to 390
www.rohm.com
c ○ 2009 ROHM Co., Ltd. All rights reserved.
1/3
2009.12 - Rev.C
0.45
0.37
2SC4617EB
Electrical characteristic curves
50
100
COLLECTOR CURRENT : IC (mA)
Data Sheet
VCE=6V
COLLECTOR CURRENT : IC (mA)
80
Ta=25°C
COLLECTOR CURRENT : IC (mA)
20 10 5
Ta=100°C
25°C −55°C
0.50mA mA 0.45 A 0.40m mA 0.35 0.30mA
10
Ta=25°C
30μA 27μA 24μA 21μA
8
60
0.25mA 0.20mA
6
18μA 15μA 12μA 9μA 6μA 3μA
2 1 0.5 0.2 0.1 0
40
0.15mA 0.10mA
4
20
0.05mA IB=0A 0 0.4 0.8 1.2 1.6 2.0
2
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 BASE TO EMITTER VOLTAGE : VBE (V)
0 0
4
8
IB=0A 12
16
20
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
Fig.1
Grounded emitter propagation characteristics
Fig.2
Grounded emitter output characteristics ( Ι )
Fig.3
Grounded emitter output characteristics ( ΙΙ )
500
COLLECTOR SATURATION VOLTAGE : VCE(sat) (V)
Ta=25°C
500 Ta=100°C
VCE=5V 3V 1V
DC CURRENT GAIN : hFE
VCE=5V
0.5
Ta=25°C
DC CURRENT GAIN : hFE
200
200
25°C −55°C
0.2 IC/IB=50 20 10
100
100
0.1 0.05
50
50
0.02
20 10 0.2
20 10 0.2
0.5 1
2
5
10 20
50 100 200
0.5 1
2
5
10 20
50 100 200
0.01 0.2
0.5 1
2
5
10
20
50 100 200
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
Fig.4 DC current gain vs. collector current ( Ι )
Fig.5 DC current gain vs. collector current ( ΙΙ )
Fig. 6 Collector-emitter saturation voltage vs. collector current
COLLECTOR SATURATION VOLTAGE : VCE(sat) (V)
COLLECTOR SATURATION VOLTAGE : VCE(sat) (V)
0.5
IC/IB=10
0.5
IC/IB=50
TRANSITION FREQUENCY : fT (MHz)
500
Ta=25°C VCE=6V
0.2 Ta=100°C 25°C −55°C
0.2 0.1 0.05
Ta=100°C 25°C −55°C
0.1 0.05
200
0.02
0.02 0.01 0.2 0.5 1 2 5 10 20 50 100
100
0.01 0.2 0.5 1 2 5 10 20 50 100 200
50 −0.5 −1
−2
−5
−10 −20
−50 −100
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
EMITTER CURRENT : IE (mA)
Fig.7 Collector-emitter saturation voltage vs. collector current ( Ι )
Fig.8 Collector-emitter saturation voltage vs. collector current (ΙΙ)
Fig.9 Gain bandwidth product vs. emitter current
www.rohm.com
c ○ 2009 ROHM Co., Ltd. All rights reserved.
2/3
2009.12 - Rev.C
2SC4617EB
BASE COLLECTOR TIME CONSTANT : Cc·rbb' (ps)
Data Sheet
COLLECTOR OUTPUT CAPACITANCE : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF)
20
10
Cib
Ta=25°C f=1MHz IE=0A IC=0A
200
Ta=25°C f=32MHZ VCB=6V
100
5
50
2
Co
20
b
1
0.2 0.5 1 2 5 10 20 50
10 −0.2 −0.5 −1 −2 −5 −10
COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V)
EMITTER CURRENT : IE (mA)
Fig.10
Collector output capacitance vs. collector-base voltage Emitter input capacitance vs. emitter-base voltage
Fig.11 Base-collector time constant vs. emitter current
www.rohm.com
c ○ 2009 ROHM Co., Ltd. All rights reserved.
3/3
2009.12 - Rev.C
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved.
R0039A
很抱歉,暂时无法提供与“2SC4617EB_09”相匹配的价格&库存,您可以联系我们找货
免费人工找货