2SCR513PT100

2SCR513P Datasheet NPN 1.0A 50V Middle Power Transistor lOutline Value VCEO IC 50V 1.0A MPT3 Base Collector Emitter 2SCR513P (SC-62) e N co ew m m D es en ig de ns d f lFeatures 1) Suitable for Middle Power Driver 2) Complementary PNP Types : 2SAR513P 3) Low VCE(sat) VCE(sat)=0.35V(Max.) (IC/IB=500mA/25mA) or Parameter 4) Lead Free/RoHS Compliant. lInner circuit Collector lApplications Motor driver , LED driver Power supply Base Emitter lPackaging specifications Part No. Package size (mm) Taping code MPT3 4540 T100 Basic Reel size Tape width ordering (mm) (mm) unit (pcs) 180 12 1,000 Marking NC R 2SCR513P Package lAbsolute maximum ratings (Ta = 25°C) Symbol VCBO Values 50 Unit V Collector-emitter voltage VCEO 50 V Emitter-base voltage VEBO 6 V IC N ot Parameter Collector-base voltage Collector current DC Pulsed ICP PD Power dissipation A 2.0 A *2 0.5 W *3 2.0 W 150 °C -55 to +150 °C PD Tj Junction temperature Range of storage temperature *1 Pw=10ms , single pulse *2 Each terminal mounted on a reference land *3 Mounted on a ceramic board (40×40×0.7mm) www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 1.0 *1 1/6 Tstg 2013.05 - Rev.B Data Sheet 2SCR513P lElectrical characteristics(Ta = 25°C) Collector-emitter breakdown voltage Collector-base breakdown voltage Emitter-base breakdown voltage Symbol Conditions Min. Typ. Max. Unit BVCEO IC = 1mA 50 - - V BVCBO IC = 100mA 50 - - V BVEBO IE = 100mA 6 - - V VCB = 50V - - 1 mA ICBO e N co ew m m D es en ig de ns d f Collector cut-off current or Parameter IEBO Emitter cut-off current Collector-emitter saturation voltage VEB = 4V VCE(sat) *1 IC = 500mA, IB = 25mA - - 1 mA - 0.13 0.35 V hFE VCE = 2V, IC = 50mA 180 - 450 - Transition frequency fT VCE = 10V, IE = -200mA f=100MHZ - 360 - MHz Output capacitance Cob VCB = 10V, IE = 0A, f = 1MHz - 7 - pF Turn-on time ton *2 - 40 - ns - 410 - ns - 75 - ns DC current gain Storage time Fall time tstg *2 tf *2 IC=0.5A IB1=50mA IB2= -50mA VCC⋍10V *1 Pulsed *2 See switching time test circuit N ot R lSwitching time test circuit www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 2/6 2013.05 - Rev.B Data Sheet 2SCR513P lElectrical characteristic curves(Ta = 25°C) Fig.2 Typical Output Characteristics Fig.1 Ground Emitter Propagation Characteristics 5.0mA 4.0mA 3.0mA 2.5mA 0.50 1000 Ta=125ºC 75ºC 25ºC -40ºC 100 10 2.0mA 0.45 0.40 or COLLECTOR CURRENT : IC [A] VCE= 2V 1.5mA 0.35 0.30 e N co ew m m D es en ig de ns d f COLLECTOR CURRENT : IC [mA] 10000 0.25 0.20 0.15 IB= 0.5mA 0.10 0.05 1 0 0.5 1 0.00 1.5 BASE TO EMITTER VOLTAGE : VBE [V] Ta=25ºC 0 1 1.5 2 Fig.4 DC current gain vs. output current (II) 1000 1000 Ta=25ºC R DC CURRENT GAIN : hFE VCE= 2V 100 N ot DC CURRENT GAIN : hFE 0.5 COLECTOR TO EMITTE VOLTAGE : VCE [V] Fig.3 DC Current Gain vs. Collector Current(I) 10 1.0mA 1 Ta=125ºC 75ºC 25ºC -40ºC 10 100 1000 10 10000 1 10 100 1000 10000 COLLECTOR CURRENT : IC [mA] COLLECTOR CURRENT : IC [mA] www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. VCE= 5V 2V 100 3/6 2013.05 - Rev.B Data Sheet 2SCR513P lElectrical characteristic curves(Ta = 25°C) Fig.6 Collector-Emitter Saturation Voltage vs. Collector Current (II) Fig.5 Collector-Emitter Saturation Voltage vs. Collector Current (I) 0.001 Ta=125ºC 75ºC 25ºC -40ºC 1 Ta=25ºC or 0.1 0.01 1 COLLECTOR-EMITTER SATURATION VOLTAGE : VCE(sat) [V] IC / IB = 20 0.1 e N co ew m m D es en ig de ns d f COLLECTOR-EMITTER SATURATION VOLTAGE : VCE(sat) [V] 1 10 100 1000 10000 IC / IB = 50 20 10 0.01 0.001 1 10 COLLECTOR CURRENT : IC [mA] 1 IC / IB = 20 Pulsed 10 100 1000 TRANSITION FREQUENCY : fT [MHz] 1000 R BASE-EMITTER SATURATION VOLTAGE : VBE(sat) [V] N ot 0.1 10000 Ta=25ºC VCE= 10V 100 10 -10 -100 -1000 EMITTER CURRENT : IE [mA] COLLECTOR CURRENT : IC [mA] www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 10000 Fig.8 Gain Bandwidth Product vs. Emitter Current Ta= -40ºC 25ºC 75ºC 125ºC 1 1000 COLLECTOR CURRENT : IC [mA] Fig.7 Base-Emitter Saturation Voltage vs. Collector Current 10 100 4/6 2013.05 - Rev.B Data Sheet 2SCR513P Fig.9 Emitter input capacitance vs. Emitter-Base Voltage Collector output capacitance vs. Collector-Base Voltage Fig.10 Safe Operating Area 10 100 Cob 0.1 Ta=25ºC Single non repetitive pulse 1ms 10ms 100ms 1 e N co ew m m D es en ig de ns d f Cib 10 1 COLLECTOR CURRENT : IC [A] Ta=25ºC f=1MHz IE=0A IC=0A or 1000 1 10 DC (Mounted on a reference land) 0.01 100 COLLECTOR - BASE VOLTAGE : VCB [V] EMITTER - BASE VOLTAGE : VEB [V] DC (Mounted on a ceramic board) 0.1 0.1 1 10 100 COLLECTOR TO EMITTER VOLTAGE : VCE [V] N ot R COLLECTOR OUTPUT CAPACITANCE : Cob [pF] EMITTER INPUT CAPACITANCE : Cib [pF] lElectrical characteristic curves(Ta = 25°C) www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 5/6 2013.05 - Rev.B Data Sheet 2SCR513P lDimensions (Unit : mm) D b1 A Lp or E LE HE MPT3 b2 b c b4 e N co ew m m D es en ig de ns d f x S A e1 A l1 β l3 e b5 y S l2 b3 e1 S e Pattern of terminal position areas [Not a recommended pattern of soldering pads] DIM N ot R A b b1 b2 c D E e e1 HE LE Lp x y DIM b3 b4 b5 l1 l2 l3 β MILIMETERS MIN MAX 1.40 1.50 0.30 0.50 1.50 1.70 0.40 0.60 0.35 0.50 4.40 4.70 2.40 2.70 3.00 1.50 3.70 4.30 0.80 1.20 1.01 1.41 0.15 0.10 INCHES MIN 0.055 0.012 0.059 0.016 0.014 0.173 0.094 0.118 0.059 0.146 0.031 0.040 - MILIMETERS MIN MAX 0.65 1.70 0.75 1.71 0.58 3.72 45° MAX 0.059 0.020 0.067 0.024 0.020 0.185 0.106 0.169 0.047 0.056 0.006 0.004 INCHES MIN 45° MAX 0.026 0.067 0.030 0.067 0.023 0.146 Dimension in mm / inches www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 6/6 2013.05 - Rev.B Notice Notes 1) The information contained herein is subject to change without notice. or 2) Before you use our Products, please contact our sales representative and verify the latest specifications : e N co ew m m D es en ig de ns d f 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. R 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. N ot 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. R1102A