BA4558F_09

ROHM’s Selection Operational Amplifier/Comparator Series Operational Amplifiers: Low Noise BA4558F,BA4558RF/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4580RF/FVM BA2115F/FVM,BA15218F,BA14741F,BA15532FBA4510F/FV ●Description General-purpose BA4558 / BA4560 / BA15218 / BA14741 / BA15532 / BA4510 family and high-reliability BA4558R / BA4560R / BA4580R / BA2115 family integrate two or four independent Op-Amps on a single chip. Especially, this series is suitable for any audio applications due to low noise and low distortion characteristics and are usable for other many applications by wide operating supply voltage range. BA4558R/BA4560R/BA4580R/BA2115 are high-reliability products with extended operating temperature range and high ESD tolerance. General-purpose No.09049EAT02 Dual Dual Dual Quad Dual Dual BA4558 family BA4560 family BA15218 family BA14741 family BA15532 family BA4510 family BA4558R family BA4560R family BA4580R family BA2115 family High-reliability Dual Dual Dual ●Features 1) High voltage gain, low noise, low distortion 2) Internal phase compensation 3) No latch up immunity 4) Wide operating supply voltage ±4.0[V]～±15.0[V](split supply) (BA4558/BA4560/BA4558R/BA4560R family) ±2.0[V]～±16.0[V](split supply) (BA4580R/BA15218 family) ±2.0[V]～±18.0[V](split supply) (BA14741 family) ±3.0[V]～±20.0[V](split supply) (BA15532 family) ±1.0[V]～±3.5[V](split supply) (BA4510 family) ±1.0[V]～±7.0[V](split supply) (BA2115 family) 5) Internal ESD protection Human body mode (HBM) ±5000[V](Typ.) (BA4558R/BA4560R/BA4580R/BA2115 family) 6) Wide temperature range -40[℃]～+85[℃] (BA4558/BA4560/BA15218/BA14741/BA2115 family) -40[℃]～+105[℃] (BA4558R/BA4560R/BA4580R family) Dual ●Pin Assignments OUT1 1 2 3 4 5 6 7 -+ CH2 +CH3 CH1 -+ CH4 +14 13 12 11 10 9 8 OUT4 -IN4 +IN4 VEE +IN3 -IN3 OUT3 OUT1 1 -IN1 +IN1 VEE 2 3 4 8 VCC OUT2 -IN1 +IN1 VCC +IN2 -IN2 -+ +CH2 CH1 7 6 -IN2 5 +IN2 OUT2 SOP8 SSOP-B8 MSOP8 SOP14 BA4558F BA4560F BA15218F BA15532F BA4510F BA2115F BA4558R F BA4560R F BA4580R F BA4510F BA2115F BA4558R FV BA4560R FV BA4510FV BA4558R FVM BA4560R FVM BA4580R FVM BA2115FVM BA14741F www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 1/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ●Absolute maximum rating (Ta=25[℃]) ○BA4558/BA4560 family,BA4558R/BA4560R/BA4580R family Parameter Supply Voltage Differential Input Voltage(*1) Input Common-mode voltage range Operating Supply Voltage Output Current Operating Temperature Storage Temperature Maximum Junction Temperature Symbol VCC-VEE Vid Vicm Vopr Io Topr Tstg Tjmax (VCC-VEE) VEE～VCC 8～30 (±4～±15) -40～+85 -55～+125 +125 BA4558 family BA4560 family Rating BA4558R family +36 36 BA4560R family Technical Note BA4580R family Unit V V V V mA ℃ ℃ ℃ (VEE-0.3)～VEE+36 8～30 (±4～±15) -40～+105 -55～+150 +150 4～32(±2～±16) ±50 Note: Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of absolute maximum rating or use out absoluted maximum rated temperature environment may cause deterioration of characteristics. (*1) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more then VEE. ●Electrical characteristics ○BA4558/BA4560 family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Ta=25[℃]) Guaranteed limit Parameter Symbol Temperature Range BA4558 family Min. Typ. 0.5 5 60 3 ±14 ±13 100 ±14 90 90 105 1.0 Max. 6 200 500 6 - BA4560 family Min. ±12 ±10 86 ±12 70 76.3 Typ. 0.5 5 50 4 ±14 ±13 100 ±14 90 90 4 10 Max. 6 200 500 7.5 150 2.2 Unit Condition Input Offset Voltage (*2) Input Offset Current (*2) Input Bias Current (*3) Supply Current Maximum Output Voltage Large Single Voltage Gain Input Common-mode Voltage Range Common-mode Rejection Ratio Power Supply Rejection Ratio Channel Separation Slew Rate Gain Bandwidth Product Input Referred Noise Voltage (*2) (*3) Vio Iio Ib ICC VOM AV Vicm CMRR PSRR CS SR GBW Vn 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ ±12 ±10 86 ±12 70 76.3 - mV nA nA mA V dB V dB dB dB V/μs MHz μV Rs≦10[kΩ] - RL=∞ All Op-Amps RL≧10[kΩ] RL≧2[kΩ] RL≧2[kΩ],VOUT=±10[V] - Rs≦10[kΩ] Rs≦10[kΩ] f=1[kHz] Input referred AV=0[dB],RL≧2[kΩ] f=10[kHz] Rs=2.2[kΩ], BW=10[Hz]～30[kHz],RIAA Absolute value Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 2/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Electrical characteristics ○BA4558R/BA4560R family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Full range -40[℃]～+105[℃]) Guaranteed limit T emperature Parameter Symbol BA4558R family BA4560R family Unit Condition Range Min. Typ. Max. Min. Typ. Max. 25℃ 0.5 6 0.5 6 Input Offset Voltage (*4) Vio mV VOUT=0[V] Full range 7 7 25℃ 5 200 5 200 Input Offset Current (*4) Iio nA VOUT=0[V] Full range 200 200 25℃ 60 500 50 500 Input Bias Current (*5) Ib nA VOUT=0[V] Full range 800 800 25℃ 3 6 3 7 RL=∞ All Op-Amps Supply Current ICC mA VIN+=0[V] Full range 6.5 7.5 25℃ ±10 ±13 ±12 ±14 RL≧2[kΩ] Full range ±10 Maximum Output Voltage VOM V ±10 ±11.5 Io=25[mA] 25℃ ±12 ±14 RL≧10[kΩ] 25℃ 86 100 86 100 RL≧2[kΩ],VO=±10[V], Large Single Voltage Gain AV dB Vicm=0[V] Full range 83 83 25℃ ±12 ±14 ±12 ±14 Input Common-mode Vicm V VOUT=±12[V] Voltage Range Full range ±12 ±12 Common-mode CMRR 25℃ 70 90 70 90 dB VOUT=±12[V] Rejection Ratio Power Supply PSRR 25℃ 76.5 90 76.5 90 dB Ri≦10[kΩ] Rejection Ratio Channel Separation Slew Rate Unity Gain Frequency Total Harmonic Distortion Input Referred Noise Voltage (*4) (*5) CS SR ft THD Vn 25℃ 25℃ 25℃ 25℃ 25℃ - 105 1 2 0.005 12 - - 105 4 4 0.003 8 - dB V/μs MHz ％ nV/ Hz f=1[kHz] AV=0[dB],RL=10[kΩ] CL=100[pF] RL=2[kΩ] AV=20[dB],RL=10[kΩ] VOUT=5[Vrms],f=1[kHz] RS=100[Ω],Vi=0[V] ,f=1[kHz] Absolute value Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. ●Electrical characteristics ○BA4580R family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Ta=25[℃]) Guaranteed limit Temperature BA4580R family Parameter Symbol Unit Range Min. Typ. Max. Input Offset Voltage (*6) Input Offset Current (*6) Input Bias Current (*7) Large Single Voltage Gain Vio Iio Ib AV 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 90 ±12 ±12 80 80 0.3 5 100 110 ±13.5 ±13.5 110 110 6 5 5 0.0005 0.8 3 200 500 9 mV nA nA dB V V dB dB mA Rs≦10[kΩ] Rs≦10[kΩ] RL≧2[kΩ] Rs≦10[kΩ] Condition RL≧10[kΩ],VOUT=±10[V] Maximum Output Voltage VOM Input Common-mode Vicm Voltage Range Common-mode Rejection Ratio CMRR Power Supply Rejection Ratio Supply Current Slew Rate Unity Gain Frequency Total Harmonic Distortion Input Referred Noise Voltage (*6) (*7) - PSRR ICC SR ft THD Vni RL=∞ All Op-Amps,VIN+=0[V] V/μs RL≧2[kΩ] MHz RL=2[kΩ] Av=20[dB],VOUT=5[Vrms],RL=2[kΩ] % f=1[kHz],20[Hz]~20[kHz] BPF μVrms RIAA,Rs=2.2 [kΩ],30[kHz] LPF Absolute value Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 3/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ●Absolute maximum rating (Ta=25[℃]) ○BA15218/BA14741F/BA15532 family Parameter Supply Voltage Differential Input Voltage Input Common-mode voltage range Operating Supply Voltage Input Current Operating Temperature Storage Temperature Maximum junction Temperature Output Short Current (*10) Output Short Time (*10) Symbol VCC-VEE Vid Vicm Vopr Ii Topr Tstg Tjmax Iomax Ts ±50 4～32 (±2～±16) -40~+85 -55~+125 125 unlimited (only 1CH short) BA15218 family 36 VCC-VEE(*8) VEE~VCC 4～36 (±2～±18) Rating BA14741 family 36 Technical Note BA15532 family 42 ±0.5(*9) Unit V V V 6～40 (±3～±20) ±10 -20~+75 V mA ℃ ℃ ℃ mA Sec unlimited Note: Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of absolute maximum rating or use out absoluted maximum rated temperature environment may cause deterioration of characteristics. (*8) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more then VEE. (*9) Don’t over input current ±10mA. Built-in resistor for protection because of over current with differential input voltage above 0.5V. (*10) Limit within Pd ●Electrical characteristics ○BA15218 family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Ta=25[℃]) Parameter Symbol Temperature Range 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ Guaranteed limit Unit Min. 86 ±12 70 76 ±12 ±10 Typ. 0.5 5 50 110 ±14 90 90 5.0 ±14 ±13 3.0 10 1.0 120 Max. 5.0 200 500 8.0 mV nA nA dB V dB dB mA V V Rs≦10[kΩ] RL≧2[kΩ],Vo=±10[V] Rs≦10[kΩ] Rs≦10[kΩ] Vin=0,RL=∞ RL≧10[kΩ] RL≧2[kΩ] Condition Input Offset Voltage (*11) Input Offset Current (*11) Input Bias Current (*12) Large Single Voltage Gain Input Common-mode Voltage Range Common-mode Rejection Ratio Power Supply Rejection Ratio Supply Current Maximum Output Voltage Slew Rate Gain Bandwidth Product Input Referred Noise Voltage Channel Separation Vio Iio Ib Av Vicm CMRR PSRR ICC VOH VOL SR GBW Vn CS V/μs GV=0[dB],RL=2[kΩ] MHz f=10[kHz] μVrms dB RS=1[kΩ], BW=20[Hz]～30[kHz],RIAA f=1[kHz] input referred (*11) Absolute value (*12) Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 4/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ●Electrical characteristics ○BA14741 family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Ta=25[℃]) Guaranteed limit Temperature Parameter Symbol Unit Range Min. Typ. Max. Input Offset Voltage (*13) Input Offset Current (*13) Technical Note Condition Rs≦10[kΩ] RL≧2[kΩ],Vo=±10[V] RL=∞,on all OpAmp Vin+=1[V],Vin-=0[V],RL=2[kΩ] Vin+=0[V],Vin-=1[V],RL=2[kΩ] Vin+=1[V],Vin-=0[V],VO=0[V] Vin+=0[V],Vin-=1[V],VO=0[V] Av=1,RL=2[kΩ] Vio Iio Ib Av CMRR Vicm PSRR ICC VOH VOL IOH IOL SR Vn CS 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 20 80 ±12 80 10 -10 10 5 - 1.0 10 60 100 100 ±13.5 100 3.0 12.5 -12.5 20 10 1.0 2.0 100 5.0 50 300 7.0 4.0 - mV nA nA V/mV dB V dB mA V V mA mA V/μs Input Bias Current (*14) Large Single Voltage Gain Common-mode Rejection Ratio Input Common-mode Voltage Range Power Supply Rejection Ratio Supply Current Maximum High Output Low Voltage Maximum Source Output Sink Current Slew Rate Input Referred Noise Voltage Channel Separation (*13) (*14) μVrms RIAA,Rs=2.2[kΩ],10[Hz]~30[kHz] dB f=1[kHz ] input referred Absolute value Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. ●Electrical characteristics ○BA15532 family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Ta=25[℃]) Guaranteed limit Temperature Parameter Symbol Unit Range Min. Typ. Max. Input Offset Voltage (*15) Input Offset Current (*15) Input Bias Current (*16) Large Single Voltage Gain Common-mode Rejection Ratio Input Common-mode Voltage Range Power Supply Rejection Ratio Supply Current Maximum Output Voltage -1 Maximum Output Voltage -2 Output Short Current Slew Rate Gain Bandwidth Product Input Referred Noise Voltage Channel Separation Vio Iio Ib Av CMRR Vicm PSRR Icc VOH/ VOL lOS SR GBW Vn CS 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 80 70 ±12 80 ±12 ±15 0.5 10 200 94 100 ±13 100 8.0 ±13 ±16 38 8.0 20 0.7 110 4.0 150 800 16.0 1.5 mV nA nA dB dB V dB mA V V mA V/μs MHz Condition Rs=50[Ω],RL≧10[kΩ] RL≧10[kΩ] RL≧10[kΩ] RL≧600[Ω],Vo=±10[V] RL≧10[kΩ] RL≧10[kΩ] Rs=50[Ω],RL≧10[kΩ] RL=∞,on all OpAmp RL≧600[Ω] RL≧600[Ω] VCC=18[V],VEE=-18[V] (*17) Av=1,RL=600[Ω],CL=100[pF] f=10[kHz],RL=600[Ω],CL=100[pF] μVrms RIAA,Rs=100[Ω],20[Hz]~30[kHz] dB RIAA Input referred (*15 Absolute value (*16) Current direction: Since first input stage is composed with NPN transistor, input bias current flows out of IC. (*17) In the case of output pin shorting with VCC or VEE. But never over the maximum power dissipation www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 5/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ●Absolute maximum rating (Ta=25[℃]) ○BA4510/BA2115 family Parameter Supply Voltage Differential Input Voltage (*18) Technical Note Symbol VCC-VEE Vid Vicm Vopr Topr Tstg Tjmax Rating BA4510 family 10 VCC-VEE VEE~VCC 2～7(±1~±3.5) -20~+75 -55~125 125 BA2115 family 14 14 (VEE-0.3)~VEE+14 2～14(±1~±7) -40~+85 -55~150 150 Unit V V V V ℃ ℃ ℃ Input Common-mode Voltage Range Operating Supply Voltage Operating Temperature Storage Temperature Maximum Junction Temperature Note: Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of absolute maximum rating or use out absoluted maximum rated temperature environment may cause deterioration of characteristics. (*18) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more then VEE. ●Electrical characteristics ○BA4510 family (Unless otherwise specified VCC=+2.5[V], VEE=-2.5[V], Ta=25[℃]) Parameter Input Offset Voltage (*19) Input Offset Current Input Bias Current Supply Current Maximum Output Voltage Large Single Voltage Gain Input Common-mode Voltage Range Common-mode Rejection Ratio Power Supply Rejection Ratio Slew Rate (*19) (*20) Symbol Vio Iio Ib ICC VOH VOL Av Vicm CMRR PSRR SR Temperature Range 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ Guaranteed limit Min. 2.5 +2.0 60 -1.3 60 60 Typ. 1 2 80 5.0 +2.4 -2.4 90 80 80 5.0 Max. 6 200 500 7.5 -2.0 +1.5 - Unit mV nA nA mA V V dB V dB dB V/μs Condition Rs=50[Ω] RL=∞ All Op-Amps RL=10[kΩ] RL=10[kΩ] RL≧10[kΩ] Rs=50[Ω] Av=1 (*19) Absolute value (*20) Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. ●Electrical characteristics ○BA2115 family (Unless otherwise specified VCC=+2.5[V], VEE=-2.5[V], Ta=25[℃]) Temperature Guaranteed limit Parameter Symbol Unit Range Min. Typ. Max. Input Offset Voltage (*21) Input Offset Current (*21) Input Bias Current Supply Current Maximum Output Voltage Large Single Voltage Gain Input Common-mode Voltage Range Common-mode Rejection Ratio Power Supply Rejection Ratio Slew Rate Gain Bandwidth Product (*21) (*22) (*22) Condition VOUT=0[V], Vicm=0[V] VOUT=0[V], Vicm=0[V] VOUT=0[V], Vicm=0[V] RL=∞ All Op-Amps, VIN+=0[V] RL≧2.5[kΩ] RL≧10[kΩ], VOUT=±2[V], Vicm=0[V] Vicm=-1.5[V]～+1.5[V] VCC=+2[V]～+14[V] AV=0[dB], VIN=±1[V] f=10[kHz] Vio Iio Ib ICC VOM AV Vicm CMRR PSRR SR GB 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ 25℃ ±2.0 60 ±1.5 60 60 - 1 2 150 3.5 ±2.2 80 74 80 4 12 6 200 400 5 - mV nA nA mA V dB V dB dB V/μs MHz Absolute value Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 6/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ●Example of electrical characteristics ○BA4558 family BA4558 family 1000 POWER DISSIPATION [mW] . 800 BA4558F Technical Note 5.0 SUPPLY CURRENT [mA] 　 . BA4558 family 5.0 BA4558 family SUPPLY CURRENT [mA] 4.0 -40℃ 25℃ 4.0 ±15V 600 3.0 3.0 400 2.0 85℃ 2.0 ±4 V ±7.5 V 200 1.0 1.0 0 0 25 50 75 100 AMBIENT TEMPERTURE [℃] . 125 0.0 0 5 10 15 20 25 SUPPLY VOLTAGE [V] 30 35 0.0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 Fig. 1 Derating Curve MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 30 25 20 15 10 5 0 0.1 1 LOAD RESISTANCE [kΩ] 10 BA4558 family Fig. 2 Supply Current – Supply Voltage 20 BA4558 family Fig. 3 Supply Current – Ambient Temperature 20 BA4558 family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 5 0 -5 -10 -15 -20 0.1 1 LOAD RESISTANCE [kΩ] 10 VOL VOH MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 VOH 10 5 0 -5 -10 -15 -20 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 ±18 SUPPLY VOLTAGE [V] VOL Fig. 4 Maximum Output Voltage Swing – Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 BA4558 family Fig. 5 Maximum Output Voltage – Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 BA4558 family Fig. 6 Maximum Output Voltage – Supply Voltage (RL=2[kΩ],Ta=25[℃]) 6 BA4558 family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] INPUT OFFSET VOLTAGE [mV] INPUT OFFSET VOLTAGE [mV] 15 10 5 0 -5 -10 -15 -20 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] VOL VOH MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 VOH 4 -40℃ 5 0 -5 -10 -15 -20 0 5 10 15 20 25 OUTPUT CURRENT [mA] VOL 2 0 -2 -4 -6 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] 25℃ 85℃ Fig. 7 Maximum Output Voltage – Ambient Temperature (VCC/VEE=+15[V]/-15[V],RL=2[kΩ]) 6 INPUT OFFSET VOLTAGE [mV] 4 2 0 -2 -4 -6 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] ±15V ±4V ±7.5V BA4558 family Fig. 8 Maximum Output Voltage – Output Current (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 80 . 70 INPUT BIAS CURRENT [nA] 60 50 40 30 20 10 0 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -40℃ BA4558 family Fig. 9 Input Offset Voltage – Supply Voltage (Vicm=0[V],Vout=0[V]) 80 70 INPUT BIAS CURRENT [nA] BA4558 family 85℃ 60 50 40 30 20 10 0 -50 -25 0 ±15V ±4V 25℃ ±7.5V 25 50 75 100 AMBIENT TEMPERATURE [℃] Fig. 10 Input Offset Voltage – Ambient Temperature Fig. 11 Input Bias Current – Supply Voltage (Vicm=0[V],Vout=0[V]) Fig. 12 Input Bias Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) (Vicm=0[V],Vout=0[V]) (*) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 7/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA4558 family 30 20 10 0 -10 -20 -30 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] 25℃ -40℃ Technical Note BA4558 family . BA4558 family 30 INPUT OFFSET CURRENT [nA] 20 10 0 -10 -20 -30 -50 ±15V BA4558 family 5 INPUT OFFSET VOLTAGE [mV] 4 3 2 1 0 -1 -2 -3 -4 -5 0 85℃ 25℃ -40℃ INPUT OFFSET CURRENT [nA] ±4V ±7.5V 85℃ -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] Fig. 13 Input Offset Current – Supply Voltage (Vicm=0[V],Vout=0[V]) COMMON MODE REJECTION RATIO [dB] 150 125 100 75 50 25 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 BA4558 family Fig. 14 Input Offset Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) POWER SUPPLY REJECTION RATIO [dB] . 150 125 100 75 50 25 0 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 0.0 BA4558 family Fig. 15 Input Offset Voltage – Common Mode Input Voltage (VCC=8[V],Vout=4[V]) 2.0 . BA4558 family 1.5 SLEW RATE [V/μs] 1.0 0.5 ±2 ±4 Fig. 16 Common Mode Rejection Ratio – Ambient Temperature (VCC/VEE=+15[V]/-15[V],Vicm=-12[V] to +12[V]) EQUIVALENT INPUT NOISE VOLTAGE [nV/ √Hz] . 80 BA4558 family Fig. 17 Power Supply Rejection Ratio – Ambient Temperature (VCC/VEE=+4[V]/-4[V] to +15[V]/-15[V]) 1 TOTAL HARMONIC DISTORTION [%] ±6 ±8 ±10 ±12 ±14 SUPPLY VOLTAGE [V] ±16 Fig. 18 Slew Rate – Supply Voltage (CL=100[pF],RL=2[kΩ],Ta=25[℃]) MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 30 25 20 15 10 5 0 1 10 100 FREQUENCY [Hz] 1000 BA4558 family BA4558 family 60 0.1 20kHz 40 0.01 1kHz 20 0.001 20Hz 0 1 100 FREQUENCY [Hz] 10000 0.0001 0.1 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 19 Equivalent Input Noise Voltage – Frequency (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) 60 50 VOLTAGE GAIN [dB] BA4558 family PHASE Fig. 20 Total Harmonic Distortion – Output Voltage (VCC/VEE=+15[V]/-15[V],Av=20[dB], RL＝2[kΩ],80[kHz]-LPF,Ta=25[℃]) Fig. 21 Maximum Output Voltage Swing – Frequency (VCC/VEE=+15[V]/-15[V],RL=2[kΩ],Ta=25[℃]) 0 -30 -60 -90 30 GAIN 20 10 0 1.E+00 -120 -150 -180 1.E+08 1.E+02 1.E+04 1.E+06 FREQUENCY [Hz] Fig. 22 Voltage Gain – Frequency (VCC/VEE=+15[V]/-15[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. PHASE [deg] 40 8/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA4560 family 1000 POWER DISSIPATION [mW] BA4560 family Technical Note 8.0 BA4560 family 8.0 BA4560 family 800 BA4560F 　. SUPPLY CURRENT [mA] 6.0 25℃ SUPPLY CURRENT [mA] -40℃ 6.0 ±7.5 V ±15V 600 4.0 85℃ 4.0 ±4 V 400 200 2.0 2.0 0 0 25 50 75 100 125 AMBIENT TEMPERTURE ℃] AMBIENT TEMPERATURE[[℃] . 0.0 0 5 10 15 20 25 SUPPLY VOLTAGE [V] 30 35 0.0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 Fig. 23 Derating Curve MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 30 25 20 15 10 5 0 0.1 Fig. 24 Supply Current – Supply Voltage 20 OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE [V] BA4560 family Fig. 25 Supply Current – Ambient Temperature 20 OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE [V] 15 VOH BA4560 family BA4560 family 15 10 VOH 10 5 0 -5 -10 -15 -20 VOL 5 0 -5 VOL -10 -15 -20 1 LOAD RESISTANCE [kΩ] 10 0.1 1 LOAD RESISTANCE [kΩ] 10 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 ±18 SUPPLY VOLTAGE [V] Fig. 26 Maximum Output Voltage Swing – Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE [V] 15 10 5 0 -5 -10 -15 -20 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 VOL VOH BA4560 family Fig. 27 Maximum Output Voltage – Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE [V] 15 10 VOH BA4560 family Fig. 28 Maximum Output Voltage – Supply Voltage (RL=2[kΩ],Ta=25[℃]) 6 INPUT OFFSET VOLTAGE [mV] 4 -40℃ BA4560 family 5 0 -5 -10 -15 -20 0 5 10 15 20 25 OUTPUT CURRENT [mA] VOL 2 0 -2 -4 -6 ±2 ±4 ±6 25℃ 85℃ ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] Fig. 29 Maximum Output Voltage – Ambient Temperature (VCC/VEE=+15[V]/-15[V],RL=2[kΩ]) 6 4 2 0 -2 -4 -6 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] ±15V ±4V ±7.5V BA4560 family Fig. 30 Maximum Output Voltage – Output Current (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 80 . 70 INPUT BIAS CURRENT [nA] 60 50 40 30 20 85℃ -40℃ 25℃ BA4560 family Fig. 31 Input Offset Voltage – Supply Voltage (Vicm=0[V],Vout=0[V]) 60 50 INPUT BIAS CURRENT [nA] 40 30 ±7.5V BA4560 family INPUT OFFSET VOLTAGE [mV] ±4V 20 10 0 ±15V 10 0 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] Fig. 32 Input Offset Voltage – Ambient Temperature Fig. 33 Input Bias Current – Supply Voltage (Vicm=0[V],Vout=0[V]) Fig. 34 Input Bias Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) (Vicm=0[V],Vout=0[V]) (*) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 9/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA4560 family 30 20 10 25℃ -40℃ Technical Note BA4560 family 30 INPUT OFFSET CURRENT [nA] 20 10 0 -10 -20 - 30 ±15V BA4560 family . 5 INPUT OFFSE T VOLTAGE [mV ] 4 3 2 1 0 -1 -2 -3 -4 85℃ 25℃ -40℃ BA4560 family INPUT OFFSET CURRENT [nA] ±4V ±7.5V 0 -10 85℃ -20 -30 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -50 -25 0 25 50 75 100 -5 0 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] AMBIENT TEMPERATURE [°C] Fig. 35 Input Offset Current – Supply Voltage (Vicm=0[V],Vout=0[V]) 150 125 100 75 50 25 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 BA4560 family Fig. 36 Input Offset Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) 150 125 SLEW RATE [V/μs] BA4560 family Fig. 37 Input Offset Voltage – Common Mode Input Voltage (VCC=8[V],Vout=4[V]) 6 . 5 4 3 2 1 0 BA4560 family POWER SUPPLY REJECTION RATIO [dB] . COMMON MODE REJECTION RATIO [dB] 100 75 50 25 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 ±2 ±4 ±6 ±8 ±10 ±12 ±14 SUPPLY VOLTAGE [V] ±16 Fig. 38 Common Mode Rejection Ratio – Ambient Temperature (VCC/VEE=+15[V]/-15[V],Vicm=-12[V] to +12[V]) 80 EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] BA4560 family Fig. 39 Power Supply Rejection Ratio – Ambient Temperature (VCC/VEE=+4[V]/-4[V] to +15[V]/-15[V]) MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] Fig. 40 Slew Rate – Supply Voltage (CL=100[pF],RL=2[kΩ],Ta=25[℃]) BA4560 family 1 TOTAL HARMONIC DISTORTION [%] BA4560 family 30 25 20 15 10 5 0 1 10 100 60 0.1 20kHz 40 0.01 1kHz 20 0.001 20Hz 0 1 100 FREQUENCY [Hz] 10000 0.0001 0.1 1 OUTPUT VOLTAGE [Vrms] 10 1000 Fig. 41 Equivalent Input Noise Voltage – Frequency (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) 50 .. BA4560 family Fig. 42 Total Harmonic Distortion – Output Voltage (VCC/VEE=+15[V]/-15[V],Av=20[dB], RL＝2[kΩ],80[kHz]-LPF,Ta=25[℃]) Fig. 43 Maximum Output Voltage Swing – Frequency (VCC/VEE=+15[V]/-15[V],RL=2[kΩ],Ta=25[℃]) FREQUENCY [KHz] FREQUENCY [kHz] 200 180 . 40 PHASE 160 140 120 100 PHASE [deg] VOLTAGE GAIN[dB] 30 GAIN 20 80 60 10 40 20 0 1.E+00 1.E+02 1.E+04 1.E+06 0 1.E+08 Fig. 44 Voltage Gain – Frequency (VCC/VEE=+15[V]/-15[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*) The above data is ability value of sample, it is not guaranteed. SUPPLY VOLTAGE [V] FREQUENCY [Hz] www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 10/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA4558R family 1000 POWER DISSIPATION [mW] . BA4558R family Technical Note 6.0 SUPPLY CURRENT [mA] 　 . 5.0 BA4558R family 6.0 5.0 SUPPLY CURRENT [mA] BA4558R family 800 BA4558RF -40℃ 4.0 25℃ 4.0 3.0 2.0 1.0 0.0 ±4 V ±15V 600 BA4558RFV 3.0 2.0 105℃ 400 BA4558RFVM 200 ±7.5 V 1.0 0.0 0 25 50 75 100 AMBIENT TEMPERTURE [℃] . 125 0 0 5 10 15 20 25 SUPPLY VOLTAGE [V] 30 35 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 125 Fig. 45 Derating Curve MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 30 25 20 15 10 5 0 0.1 1 LOAD RESISTANCE [kΩ] 10 BA4558R family Fig. 46 Supply Current – Supply Voltage 20 BA4558R family Fig. 47 Supply Current – Ambient Temperature 20 OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE [V] 15 10 5 0 -5 -10 -15 -20 VOL VOH BA4558R family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 VOH 5 0 -5 VOL -10 -15 -20 0.1 1 LOAD RESISTANCE [kΩ] 10 ±4 ±6 ±8 ±10 ±12 ±14 SUPPLY VOLTAGE [V] ±16 Fig. 48 Maximum Output Voltage Swing – Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 BA4558R family Fig. 49 Maximum Output Voltage – Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE [V] 15 10 VOH BA4558R family Fig. 50 Maximum Output Voltage – Supply Voltage (RL=2[kΩ],Ta=25[℃]) 6 INPUT OFFSET VOLTAGE [mV] 4 2 0 -2 -4 -6 105℃ -40℃ 25℃ BA4558R family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 5 0 -5 -10 -15 -20 -50 VOL VOH 5 0 -5 -10 -15 -20 VOL -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 125 0 5 10 15 20 25 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 OUTPUT CURRENT [mA] SUPPLY VOLTAGE [V] Fig. 51 Maximum Output Voltage – Ambient Temperature (VCC/VEE=+15[V]/-15[V],RL=2[kΩ]) . 6 4 2 0 -2 -4 -6 -50 -25 0 25 50 75 100 125 AMBIENT TEMPERATURE [℃] ±4V ±7.5V BA4558R family Fig. 52 Maximum Output Voltage – Output Current (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 50 BA4558R family Fig. 53 Input Offset Voltage – Supply Voltage (Vicm=0[V],Vout=0[V]) 50 BA4558R family INPUT OFFSET VOLTAGE [mV] INPUT BIAS CURRENT [nA] INPUT BIAS CURRENT [nA] 40 40 30 -40℃ 25℃ 30 ±4V ±7.5V 20 20 ±15V 10 105℃ 10 ±15V 0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] 0 -50 -25 0 25 50 75 100 125 AMBIENT TEMPERATURE [℃] Fig. 54 Input Offset Voltage – Ambient Temperature Fig. 55 Input Bias Current – Supply Voltage (Vicm=0[V],Vout=0[V]) Fig. 56 Input Bias Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) (Vicm=0[V],Vout=0[V]) (*) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 11/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA4558R family 60 40 -40℃ Technical Note BA4558R family BA4558R family 60 INPUT OFFSET CURRENT [nA] 40 ±4V BA4558R family 5 4 INPUT OFFSET VOLTAGE [mV] 3 2 1 0 -1 -2 -3 -4 25℃ -40℃ INPUT OFFSET CURRENT [nA] 20 0 -20 105℃ 20 0 -20 -40 -60 -50 ±15V ±7.5V 25℃ -40 -60 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] 105℃ -5 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] 125 0 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] Fig. 57 Input Offset Current – Supply Voltage (Vicm=0[V],Vout=0[V]) COMMON MODE REJECTION RATIO [dB] 150 125 100 75 50 25 0 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] 125 BA4558R family Fig. 58 Input Offset Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) . 150 POWER SUPPLY REJECTION RATIO [dB] 125 100 75 50 25 0 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 125 0.0 BA4558R family Fig. 59 Input Offset Voltage – Common Mode Input Voltage (VCC=8[V],Vout=4[V]) 2.0 . BA4558R family SLEW RATE [V/μs] 1.5 1.0 0.5 ±2 ±4 ±6 ±8 ±10 ±12 ±14 SUPPLY VOLTAGE [V] ±16 Fig. 60 Common Mode Rejection Ratio – Ambient Temperature (VCC/VEE=+15[V]/-15[V],Vicm=-12[V] to +12[V]) 80 EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] . BA4558R family Fig. 61 Power Supply Rejection Ratio – Ambient Temperature (VCC/VEE=+4[V]/-4[V] to +15[V]/-15[V]) MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] Fig. 62 Slew Rate – Supply Voltage (CL=100[pF],RL=2[kΩ],Ta=25[℃]) 30 25 20 15 10 5 0 10 100 10000 100000 100000 0 FREQUENCY [Hz] 1000 BA4558 family 1 TOTAL HARMONIC DISTORTION [%] 20kHz BA4558R family 60 0.1 1kHz 40 0.01 20 0.001 20Hz 0 1 100 FREQUENCY [Hz] 10000 0.0001 0.1 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 63 Equivalent Input Noise Voltage – Frequency (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) 60 50 VOLTAGE GAIN [dB] 40 30 GAIN BA4558R family PHASE Fig. 64 Total Harmonic Distortion – Output Voltage (VCC/VEE=+15[V]/-15[V],Av=20[dB], RL＝2[kΩ],80[kHz]-LPF,Ta=25[℃]) Fig. 65 Maximum Output Voltage Swing – Frequency (VCC/VEE=+15[V]/-15[V],RL=2[kΩ],Ta=25[℃]) 0 -30 -60 -90 -120 -150 20 10 0 1.E+00 1.E+02 1.E+04 1.E+06 -180 1.E+08 FREQUENCY [Hz] Fig. 66 Voltage Gain – Frequency (VCC/VEE=+15[V]/-15[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. PHASE [deg] 12/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA4560R family 1000 POWER DISSIPATION [mW] . BA4560R family Technical Note 6.0 SUPPLY CURRENT [mA] 　 . BA4560R family 6.0 5.0 SUPPLY CURRENT [mA] BA4560R family 800 BA4560RF 5.0 -40℃ 4.0 3.0 2.0 105℃ 4.0 3.0 2.0 1.0 0.0 ±4 V ±15V 600 BA4560RFV 25℃ 400 BA4560RFVM 200 ±7.5 V 1.0 0.0 0 100 AMBIENT TEMPERATURE [℃] . 25 50 75 125 0 0 5 10 15 20 25 SUPPLY VOLTAGE [V] 30 35 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 125 Fig. 67 Derating Curve MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 30 25 20 15 10 5 0 0.1 1 LOAD RESISTANCE [kΩ] 10 BA4560R family Fig. 68 Supply Current – Supply Voltage 20 BA4560R family Fig. 69 Supply Current – Ambient Temperature 20 BA4560R family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 VOH MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 5 0 -5 -10 VOH 5 0 -5 VOL -10 -15 -20 0.1 1 LOAD RESISTANCE [kΩ] 10 VOL -15 -20 ±4 ±6 ±8 ±10 ±12 ±14 SUPPLY VOLTAGE [V] ±16 Fig. 70 Maximum Output Voltage Swing – Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] BA4560R family Fig. 71 Maximum Output Voltage – Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 BA4560R family Fig. 72 Maximum Output Voltage – Supply Voltage (RL=2[kΩ],Ta=25[℃]) 6 INPUT OFFSET VOLTAGE [mV] 4 2 0 -2 -4 -6 105℃ BA4560R family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 5 0 -5 -10 -15 -20 -50 VOL VOH 15 10 VOH 5 0 -5 -10 -15 -20 VOL -40℃ 25℃ -25 0 25 50 75 100 125 0 5 10 15 20 25 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 AMBIENT TEMPERATURE [℃] OUTPUT CURRENT [mA] Fig. 73 Maximum Output Voltage – Ambient Temperature (VCC/VEE=+15[V]/-15[V],RL=2[kΩ]) 6 4 2 0 -2 -4 -6 -50 -25 0 25 50 75 100 125 AMBIENT TEMPERATURE [℃] ±4V ±7.5V BA4560R family Fig. 74 Maximum Output Voltage – Output Current (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 200 . 180 BA4560R family Fig. 75 Input Offset Voltage – Supply Voltage (Vicm=0[V],Vout=0[V]) 200 180 INPUT BIAS CURRENT [nA] 160 140 120 100 80 60 40 20 0 -50 -25 0 25 50 75 100 125 ±15V ±4V ±7.5V BA4560R family SUPPLY VOLTAGE [V] INPUT OFFSET VOLTAGE [mV] INPUT BIAS CURRENT [nA ] 160 140 120 100 80 60 40 20 0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] 105℃ 25℃ -40℃ ±15V AMBIENT TEMPERATURE [℃] Fig. 76 Input Offset Voltage – Ambient Temperature Fig. 77 Input Bias Current – Supply Voltage (Vicm=0[V],Vout=0[V]) Fig. 78 Input Bias Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) (Vicm=0[V],Vout=0[V]) (*) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 13/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA4560R family 60 INPUT OFFSET CURRENT [nA] 40 -40℃ 105℃ BA4560R family Technical Note 60 INPUT OFFSET CURRENT [nA] 40 20 0 -20 -40 -60 ±4V ±15V BA4560R family 5 4 INPUT OFFSET VOLTAGE [mV] 3 2 1 0 -1 -2 -3 -4 25℃ BA4560R family . 20 0 -20 25℃ ±7.5V -40℃ -40 -60 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] 105℃ -5 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] 125 0 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] Fig. 79 Input Offset Current – Supply Voltage (Vicm=0[V],Vout=0[V]) COMMON MODE REJECTION RATIO [dB] BA4560R family Fig. 80 Input Offset Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) POWER SUPPLY REJECTION RATIO [dB] . 150 125 100 75 50 25 0 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 125 SLEW RATE [V/μs] BA4560R family Fig. 81 Input Offset Voltage – Common Mode Input Voltage (VCC=8[V],Vout=4[V]) 5.0 . 150 125 100 75 50 25 0 -50 BA4560R family 4.0 3.0 2.0 1.0 0.0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 SUPPLY VOLTAGE [V] ±16 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] 125 Fig. 82 Common Mode Rejection Ratio – Ambient Temperature (VCC/VEE=+15[V]/-15[V],Vicm=-12[V] to +12[V]) 80 EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] . BA4560R family Fig. 83 Power Supply Rejection Ratio – Ambient Temperature (VCC/VEE=+4[V]/-4[V] to +15[V]/-15[V]) 1 TOTAL HARMONIC DISTORTION [%] MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] BA4560R family Fig. 84 Slew Rate – Supply Voltage (CL=100[pF],RL=2[kΩ],Ta=25[℃]) 30 25 20 15 10 5 0 10 100 10000 100000 100000 0 FREQUENCY [Hz] 1000 BA4560R family 60 0.1 20kHz 40 0.01 1kHz 20 0.001 20Hz 0 1 100 FREQUENCY [Hz] 10000 0.0001 0.1 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 85 Equivalent Input Noise Voltage – Frequency (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) 60 50 VOLTAGE GAIN [dB] 40 30 GAIN BA4560R family Fig. 86 Total Harmonic Distortion – Output Voltage (VCC/VEE=+15[V]/-15[V],Av=20[dB], RL＝2[kΩ],80[kHz]-LPF,Ta=25[℃]) Fig. 87 Maximum Output Voltage Swing – Frequency (VCC/VEE=+1 5[V]/-15[V],RL=2[kΩ],Ta=25[℃]) 0 -30 -60 -90 -120 -150 -180 PHASE 20 10 0 1.E+00 1.E+02 1.E+04 1.E+06 FREQUENCY [Hz] 1.E+08 Fig. 88 Voltage Gain – Frequency (VCC/VEE=+15[V]/-15[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. PHASE [deg] 14/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA4580R family 1000 POWER DISSIPATION [mW] . BA4580R family Technical Note 10.0 BA4580R family 10.0 BA4580R family 　. 800 BA4580RF SUPPLY CURRENT [mA] 8.0 SUPPLY CURRENT [mA] -40℃ 8.0 ±15V 600 6.0 25℃ 6.0 400 BA4580RFVM 4.0 105℃ 4.0 ±2 V ±7.5 V 200 2.0 2.0 0 0 100 AMBIENT TEMPERATURE [℃] . 25 50 75 125 0.0 0 5 10 15 20 25 SUPPLY VOLTAGE [V] 30 35 0.0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 Fig. 89 Derating Curve MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 30 25 20 15 10 5 0 0.1 1 LOAD RESISTANCE [kΩ] 10 BA4580R family Fig. 90 Supply Current – Supply Voltage 20 BA4580R family Fig. 91 Supply Current – Ambient Temperature 20 BA4580R family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 VOH 15 VOH 10 5 0 -5 -10 -15 -20 VOL 5 0 -5 -10 -15 -20 0.1 1 LOAD RESISTANCE [kΩ] 10 VOL ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 ±18 SUPPLY VOLTAGE [V] Fig. 92 Maximum Output Voltage Swing – Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 BA4580R family Fig. 93 Maximum Output Voltage – Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 BA4580R family Fig. 94 Maximum Output Voltage – Supply Voltage (RL=2[kΩ],Ta=25[℃]) 6 BA4580R family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] INPUT OFFSET VOLTAGE [mV] INPUT OFFSET VOLTAGE [mV] 15 10 5 0 -5 VOL VOH MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 VOH 4 2 0 -2 -4 -6 105℃ -40℃ 25℃ 5 0 -5 -10 -15 -20 VOL -10 -15 -20 -50 -25 0 25 50 75 100 125 AMBIENT TEMPERATURE [℃] 0 5 10 15 20 25 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 OUTPUT CURRENT [mA] Fig. 95 Maximum Output Voltage – Ambient Temperature (VCC/VEE=+15[V]/-15[V],RL=2[kΩ]) 6 BA4580R family Fig. 96 Maximum Output Voltage – Output Current (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 200 . 180 INPUT BIAS CURRENT [nA] BA4580R family Fig. 97 Input Offset Voltage – Supply Voltage (Vicm=0[V],Vout=0[V]) 200 180 160 140 120 100 80 60 40 20 0 ±2V ±15V ±7.5V BA4580R family SUPPLY VOLTAGE [V] INPUT OFFSET VOLTAGE [mV] INPUT OFFSET VOLTAGE [mV] 4 2 0 -2 -4 -6 -50 -25 0 25 50 75 100 125 AMBIENT TEMPERATURE [℃] ±15V ±2V ±7.5V INPUT BIAS CURRENT [nA] 160 140 120 100 80 60 40 20 0 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] 105℃ 25℃ -40℃ -50 -25 0 25 50 75 100 125 Fig. 98 Input Offset Voltage – Ambient Temperature Fig. 99 Input Bias Current – Supply Voltage (Vicm=0[V],Vout=0[V]) (Vicm=0[V],Vout=0[V]) (*) The above data is ability value of sample, it is not guaranteed. Fig. 100 Input Bias Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) AMBIENT TEMPERATURE [℃] www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 15/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA4580R family 30 20 105℃ Technical Note . BA4580R family 30 INPUT OFFSET CURRENT [nA] BA4580R family 5 BA4580R family INPUT OFFSET VOLTAGE [mV] INPUT OFFSET VOLTAGE [mV] INPUT OFFSET CURRENT [nA] 4 3 2 1 0 -1 -2 -3 -4 20 ±2V ±7.5V 105℃ 25℃ -40℃ 10 0 25℃ 10 0 ±15V -10 -20 -30 ±0 ±2 -40℃ -10 -20 -30 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] 125 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -5 0 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] Fig. 101 Input Offset Current – Supply Voltage (Vicm=0[V],Vout=0[V]) COMMON MODE REJECTION RATIO [dB] 150 125 100 75 50 25 0 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] 125 BA4580R family Fig. 102 Input Offset Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) POWER SUPPLY REJECTION RATIO [dB] . 150 125 100 75 50 25 0 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 125 -10 ±0 BA4580R family Fig. 103 Input Offset Voltage – Common Mode Input Voltage 10 . BA4580R (VCC=8[V],Vout=4[V]) family 5 SLEW RATE [V/μs] 0 -5 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] Fig. 104 Common Mode Rejection Ratio – Ambient Temperature (VCC/VEE=+15[V]/-15[V],Vicm=-12[V] to +12[V]) 80 EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] . BA4580R family Fig. 105 Power Supply Rejection Ratio – Ambient Temperature (VCC/VEE=+2[V]/-2[V] to +15[V]/-15[V]) 1 TOTAL HARMONIC DISTORTION [%] MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] BA4580R family Fig. 106 Slew Rate – Supply Voltage (CL=100[pF],RL=2[kΩ],Ta=25[℃]) 30 25 20 15 10 5 0 1 10 100 FREQUENCY [kHz] 1000 BA4580R family 60 0.1 20kHz 40 0.01 1kHz 20 0.001 20Hz 0 1 100 FREQUENCY [Hz] 10000 0.0001 0.1 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 107 Equivalent Input Noise Voltage – Frequency (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) 60 50 VOLTAGE GAIN [dB] 40 30 GAIN BA4580R family Fig. 108 Total Harmonic Distortion – Output Voltage (VCC/VEE=+15[V]/-15[V],Av=20[dB], RL＝2[kΩ],80[kHz]-LPF,Ta=25[℃]) Fig. 109 Maximum Output Voltage Swing – Frequency (VCC/VEE=+15[V]/-15[V],RL=2[kΩ],Ta=25[℃]) 0 -30 -60 -90 -120 -150 PHASE 20 10 0 -180 1.E-01 1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 FREQUENCY [kHz] Fig. 110 Voltage Gain – Frequency (VCC/VEE=+15[V]/-15[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. PHASE [deg] 16/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA15218 family 1000 POWER DISSIPATION [mW] . BA15218 family Technical Note 10.0 SUPPLY CURRENT [mA] 　 . BA15218 family 10.0 BA15218 family 800 BA15218F 600 6.0 -40℃ 25℃ SUPPLY CURRENT [mA] 8.0 8.0 6.0 ±7.5 V ±15V 400 4.0 4.0 200 2.0 85℃ 2.0 ±2 V 0 0 25 50 75 100 . 125 AMBIENT TEMPERATURE [℃] 0.0 0 5 10 15 20 25 SUPPLY VOLTAGE [V] 30 35 0.0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 Fig. 111 Derating Curve MAXIMUM OUTPUT VOLTAGE SWING[Vp-p] 30 25 20 15 10 5 0 0.1 1 LOAD RESISTANCE [kΩ] 10 BA15218 family Fig. 112 Supply Current – Supply Voltage 20 BA15218 family Fig. 113 Supply Current – Ambient Temperature 20 OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE [V] 15 VOH BA15218 family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 VOH 10 5 0 -5 -10 -15 -20 VOL 5 0 -5 VOL -10 -15 -20 0.1 1 LOAD RESISTANCE [kΩ] 10 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 ±18 SUPPLY VOLTAGE [V] Fig. 114 Maximum Output Voltage Swing – Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 BA15218 family Fig. 115 Maximum Output Voltage – Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 BA15218 family Fig. 116 Maximum Output Voltage – Supply Voltage (RL=2[kΩ],Ta=25[℃]) 6 INPUT OFFSET VOLTAGE [mV] 4 2 0 -2 -4 -6 25℃ 85℃ -40℃ BA15218 family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 5 0 -5 -10 -15 -20 -50 VOL VOH MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 VOH 5 0 -5 -10 -15 -20 VOL -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 0 5 10 15 20 25 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 ±18 OUTPUT CURRENT [mA] SUPPLY VOLTAGE [V] Fig. 117 Maximum Output Voltage – Ambient Temperature (VCC/VEE=+15[V]/-15[V],RL=2[kΩ]) 6 BA15218 family Fig. 118 Maximum Output Voltage – Output Current (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 60 . 50 40 30 20 85℃ BA15218 family Fig. 119 Input Offset Voltage – Supply Voltage (Vicm=0[V],Vout=0[V]) 60 50 INPUT BIAS CURRENT [nA] 40 ±15V BA15218 family INPUT OFFSET VOLTAGE [mV] INPUT OFFSET VOLTAGE [mV] ±2V 2 0 ±15V ±7.5V INPUT BIAS CURRENT [nA] 4 -40℃ 25℃ 30 20 ±7.5V -2 -4 -6 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] ±2V 10 0 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] 10 0 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] Fig. 120 Input Offset Voltage – Ambient Temperature (Vicm=0[V],Vout=0[V]) (*) The above data is ability value of sample, it is not guaranteed. Fig. 121 Input Bias Current – Supply Voltage (Vicm=0[V],Vout=0[V]) Fig. 122 Input Bias Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 17/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA15218 family . 30 20 10 0 -10 85℃ -40℃ 25℃ Technical Note BA15218 family 30 INPUT OFFSET CURRENT [nA] 20 10 0 -10 -20 -30 ±15V BA15218 family 5 4 INPUT OFFSET VOLTAGE [mV] BA15218 family INPUT OFFSET CURRENT [nA] 3 2 1 0 -1 -2 -3 -4 85℃ 25℃ -40℃ ±2V ±7.5V -20 -30 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -5 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 0 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] Fig. 123 Input Offset Current – Supply Voltage (Vicm=0[V],Vout=0[V]) COMMON MODE REJECTION RATIO [dB] BA15218 family Fig. 124 Input Offset Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) POWER SUPPLY REJECTION RATIO [dB] . 150 125 3 SLEW RATE [V/μs] BA15218 family Fig. 125 Input Offset Voltage – Common Mode Input Voltage (VCC=8[V],Vout=4[V]) 4 BA15218 family 150 125 100 75 50 25 0 -50 100 75 50 25 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 2 1 0 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 Fig. 126 Common Mode Rejection Ratio – Ambient Temperature (VCC/VEE=+15[V]/-15[V],Vicm=-12[V] to +12[V]) 80 EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] . BA15218 family Fig. 127 Power Supply Rejection Ratio – Ambient Temperature (VCC/VEE=+2[V]/-2[V] to +15[V]/-15[V]) MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 1 TOTAL HARMONIC DISTORTION [%] BA15218 family Fig. 128 Slew Rate – Supply Voltage (CL=100[pF],RL=2[kΩ],Ta=25[℃]) 30 25 20 15 10 5 0 1 10 100 FREQUENCY [Hz] FREQUENCY [kHz] 1000 BA15218 family 60 0.1 20kHz 40 0.01 1kHz 20 0.001 20Hz 0 1 100 FREQUENCY [Hz] 10000 0.0001 0.1 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 129 Equivalent Input Noise Voltage – Frequency (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) 60 .. 50 40 30 GAIN BA15218 family PHASE Fig. 130 Total Harmonic Distortion – Output Voltage (VCC/VEE=+15[V]/-15[V],Av=20[dB], RL＝2[kΩ],80[kHz]-LPF,Ta=25[℃]) Fig. 131 Maximum Output Voltage Swing – Frequency (VCC/VEE=+15[V]/-15[V],RL=2[kΩ],Ta=25[℃]) 0 -30 PHASE [degree] PHASE [deg] -60 -90 -120 -150 -180 VOLTAGE GAIN [dB] . 20 10 0 1.E+00 1.E+02 1.E+04 1.E+06 FREQUENCY [Hz] 1.E+08 Fig. 132 Voltage Gain – Frequency (VCC/VEE=+15[V]/-15[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 18/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA14741 family 1000 POWER DISSIPATION [mW] . BA14741 family Technical Note 8.0 SUPPLY CURRENT [mA] 　 . BA14741 family 8.0 BA14741 family 800 BA14741F 600 -40℃ 25℃ SUPPLY CURRENT [mA] 6.0 6.0 ±18V 4.0 4.0 ±15 V 400 200 2.0 85℃ 2.0 ±2 V 0 0 25 50 75 100 AMBIENT TEMPERATURE [℃] . 125 0.0 0 5 10 15 20 25 30 SUPPLY VOLTAGE [V] 35 40 0.0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 Fig. 133 Derating Curve MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 30 25 20 15 10 5 0 0.1 1 LOAD RESISTANCE [kΩ] 10 BA14741 family Fig. 134 Supply Current – Supply Voltage 20 BA14741 family Fig. 135 Supply Current – Ambient Temperature 20 OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE [V] 15 VOH BA14741 family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 5 0 -5 -10 -15 -20 0.1 1 LOAD RESISTANCE [kΩ] 10 VOL VOH 10 5 0 -5 -10 -15 -20 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 ±18 SUPPLY VOLTAGE [V] VOL Fig. 136 Maximum Output Voltage Swing – Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE [V] 15 10 5 0 -5 -10 -15 -20 -50 -25 75 AMBIENT TEMPERATURE [℃] 0 25 50 100 VOL VOH BA14741 family Fig. 137 Maximum Output Voltage – Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 BA14741 family Fig. 138 Maximum Output Voltage – Supply Voltage (RL=2[kΩ],Ta=25[℃]) 6 INPUT OFFSET VOLTAGE [mV] 4 2 0 -2 -4 -6 25℃ 85℃ -40℃ BA14741 family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 5 0 -5 -10 -15 -20 0 5 10 15 20 OUTPUT CURRENT [mA] VOL VOH ±0 ±4 ±8 ±12 ±16 ±20 SUPPLY VOLTAGE [V] Fig. 139 Maximum Output Voltage – Ambient Temperature (VCC/VEE=+15[V]/-15[V],RL=2[kΩ]) 6 INPUT OFFSET VOLTAGE [mV] 4 2 0 -2 -4 -6 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] ±18V ±2V ±15V BA14741 family Fig. 140 Maximum Output Voltage – Output Current (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 200 . 180 INPUT BIAS CURRENT [nA] BA14741 family Fig. 141 Input Offset Voltage – Supply Voltage (Vicm=0[V],Vout=0[V]) 200 180 INPUT BIAS CURRENT [nA] 160 140 120 100 80 60 40 20 0 ±18V BA14741 family 160 140 120 100 80 60 40 20 0 ±0 ±4 ±8 ±12 ±16 ±20 SUPPLY VOLTAGE [V] 85℃ -40℃ 25℃ ±2V ±15V -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] Fig. 142 Input Offset Voltage – Ambient Temperature (Vicm=0[V],Vout=0[V]) (*) The above data is ability value of sample, it is not guaranteed. Fig. 143 Input Bias Current – Supply Voltage (Vicm=0[V],Vout=0[V]) Fig. 144 Input Bias Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 19/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA14741 family 30 20 10 0 -10 85℃ BA14741 family Technical Note 30 INPUT OFFSET CURRENT [nA] 20 10 ±18V BA14741 family 5 4 INPUT OFFSET VOLTAGE [mV] BA14741 family . INPUT OFFSET CURRENT [nA] 3 2 1 0 -1 -2 -3 -4 85℃ 25℃ -40℃ -40℃ 25℃ ±15V 0 -10 ±2V -20 -30 ±0 ±4 ±8 ±12 ±16 SUPPLY VOLTAGE [V] ±20 -20 -30 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 -5 0 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] Fig. 145 Input Offset Current – Supply Voltage (Vicm=0[V],Vout=0[V]) COMMON MODE REJECTION RATIO [dB] 150 125 100 75 50 25 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 BA14741 family Fig. 146 Input Offset Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) POWER SUPPLY REJECTION RATIO [dB] 150 125 100 75 50 25 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 SLEW RATE [V/μs] BA14741 family Fig. 147 Input Offset Voltage – Common Mode Input Voltage (VCC=8[V],Vout=4[V]) 3.0 . 2.5 2.0 1.5 1.0 0.5 0.0 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] BA14741 family Fig. 148 Common Mode Rejection Ratio – Ambient Temperature (VCC/VEE=+15[V]/-15[V],Vicm=-12[V] to +12[V]) 80 EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] . BA14741 family Fig. 149 Power Supply Rejection Ratio – Ambient Temperature (VCC/VEE=+2[V]/-2[V] to +15[V]/-15[V]) MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 1 TOTAL HARMONIC DISTORTION [%] 20kHz BA14741 family Fig. 150 Slew Rate – Supply Voltage (CL=100[pF],RL=2[kΩ],Ta=25[℃]) 30 25 20 15 10 5 0 1 10 100 FREQUENCY [kHz] 1000 BA14741 family 60 0.1 1kHz 40 0.01 20 0.001 20Hz 0 1 10 100 1000 FREQUENCY [Hz] 10000 0.0001 0.1 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 151 Equivalent Input Noise Voltage – Frequency (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) 60 50 VOLTAGE GAIN [dB] 40 30 GAIN BA14741 family PHASE Fig. 152 Total Harmonic Distortion – Output Voltage (VCC/VEE=+15[V]/-15[V],Av=20[dB], RL＝2[kΩ],80[kHz]-LPF,Ta=25[℃]) Fig. 153 Maximum Output Voltage Swing – Frequency (VCC/VEE=+15[V]/-15[V],RL=2[kΩ],Ta=25[℃]) 0 -30 -60 -90 -120 -150 -180 20 10 0 1.E+00 1.E+02 1.E+04 1.E+06 FREQUENCY [Hz] 1.E+08 Fig. 154 Voltage Gain – Frequency (VCC/VEE=+15[V]/-15[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. PHASE [deg] 20/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA15532 family 1000 POWER DISSIPATION [mW] . BA15532 family Technical Note 20.0 SUPPLY CURRENT [mA] 　 . BA15532 family 20.0 BA15532 family 800 BA15532F -20℃ 25℃ SUPPLY CURRENT [mA] 16.0 16.0 ±20V 600 12.0 12.0 400 8.0 75℃ 8.0 ±15 V 200 4.0 4.0 ±2 V 0 0 25 50 75 100 AMBIENT TEMPERATURE [℃] . 125 0.0 0 5 10 15 20 25 30 SUPPLY VOLTAGE [V] 35 40 0.0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 Fig. 155 Derating Curve 30 MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 25 20 15 10 5 0 0.1 1 LOAD RESISTANCE [kΩ] 10 BA15532 family Fig. 156 Supply Current – Supply Voltage 20 BA15532 family Fig. 157 Supply Current – Ambient Temperature 20 BA15532 family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 5 0 -5 -10 -15 -20 0.1 1 LOAD RESISTANCE [kΩ] 10 VOL VOH MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 15 10 5 0 -5 -10 -15 -20 ±0 ±4 VOH VOL ±8 ±12 ±16 ±20 SUPPLY VOLTAGE [V] ±24 Fig. 158 Maximum Output Voltage Swing – Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 BA15532 family Fig. 159 Maximum Output Voltage– Load Resistance(VCC/VEE=+15[V]/-15[V],Ta=25[℃ ]) 20 BA15532 family Fig. 160 Maximum Output Voltage– Supply Voltage(RL=2[kΩ],Ta=25[℃]) 6 BA15532 family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] INPUT OFFSET VOLTAGE [mV] INPUT OFFSET VOLTAGE [mV] 15 10 5 0 -5 -10 -15 -20 -50 -25 75 AMBIENT TEMPERATURE [℃] 0 25 50 100 VOL VOH 15 10 5 0 -5 -10 -15 -20 0 5 10 15 20 25 OUTPUT CURRENT [mA] VOL VOH 4 2 -20℃ 0 -2 25℃ 75℃ -4 -6 ±0 ±4 ±8 ±12 ±16 ±20 ±24 SUPPLY VOLTAGE [V] Fig. 161 Maximum Output Voltage– Ambient Temperature(VCC/VEE=+15[V]/-15[V],RL=2[kΩ]) 6 BA15532 family Fig. 162 Maximum Output Voltage– Output Current(VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 800 BA15532 family Fig. 163 Input Offset Voltage – Supply Voltage (Vicm=0[V],Vout=0[V]) 800 700 INPUT BIAS CURRENT [nA] BA15532 family . INPUT OFFSET VOLTAGE [mV] INPUT OFFSET VOLTAGE [mV] INPUT BIAS CURRENT [nA] 4 2 0 -2 ±20V 700 600 500 400 300 200 100 0 75℃ -20℃ 25℃ 600 ±20V ±15V ±3V 500 400 300 ±15V ±3V 200 100 0 -4 -6 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] ±0 ±4 ±8 ±12 ±16 ±20 ±24 -50 -25 0 25 50 75 100 SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [℃] Fig. 164 Input Offset Voltage – Ambient Temperature (Vicm=0[V],Vout=0[V]) Fig. 165 Input Bias Current – Supply Voltage (Vicm=0[V],Vout=0[V]) Fig. 166 Input Bias Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) (*) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 21/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA15532 family 30 20 25℃ Technical Note BA15532 family . BA15532 family 30 INPUT OFFSET CURRENT [nA] BA15532 family 5 4 -20℃ 20 10 0 -10 -20 -30 INPUT OFFSET VOLTAGE [mV] INPUT OFFSET VOLTAGE [mV] INPUT OFFSET CURRENT [nA] ±3V 3 2 1 0 -1 -2 -3 -4 -5 0 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] 75℃ 25℃ -20℃ 10 0 75℃ -10 -20 -30 ±0 ±4 ±8 ±12 ±16 ±20 SUPPLY VOLTAGE [V] ±24 ±20V ±15V -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 Fig. 167 Input Offset Current – Supply Voltage (Vicm=0[V],Vout=0[V]) 175 BA15532 family Fig. 168 Input Offset Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) POWER SUPPLY REJECTION RATIO [dB] . 150 BA15532 family Fig. 169 Input Offset Voltage– Common Mode Input Voltage (VCC=8[V],Vout=4[V]) 12 10 8 6 4 2 0 . BA15532 family COMMON MODE REJECTION RATIO [dB] 150 125 SLEW RATE [V/μs] -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 125 100 100 75 75 50 50 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 25 ±2 ±6 ±10 ±14 ±18 SUPPLY VOLTAGE [V] ±22 Fig. 170 Common Mode Rejection Ratio – Ambient Temperature (VCC/VEE=+15[V]/-15[V],Vicm=-12[V] to +12[V]) EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] . Fig. 171 Power Supply Rejection Ratio – Ambient Temperature (VCC/VEE=+3[V]/-3[V] to +15[V]/-15[V]) MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] Fig. 172 Slew Rate – Supply Voltage (CL=100[pF],RL=2[kΩ],Ta=25[℃]) 30 25 20 15 10 5 0 1 10 100 FREQUENCY [Hz] FREQUENCY [kHz] 1000 BA15532 family TOTAL HARMONIC DISTORTION [%] 80 BA15532 family 1 BA15532 family 60 0.1 40 0.01 20kHz 1kHz 20 0.001 20Hz 0 10 100 1000 FREQUENCY [Hz] 10000 0.0001 0.1 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 173 Equivalent Input Noise Voltage – Frequency (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) 60 .. 50 40 30 GAIN BA15532 family 0 PHASE Fig. 174 Total Harmonic Distortion – Output Voltage (VCC/VEE=+15[V]/-15[V],Av=20[dB], RL＝600[Ω],80[kHz]-LPF,Ta=25[℃]) Fig. 175 Maximum Output Voltage Swing – Frequency (VCC/VEE=+15[V]/-15[V],RL=600[Ω],Ta=25[℃]) -30 -60 -90 -120 -150 VOLTAGE GAIN [dB] . 20 10 0 1.E+00 1.E+02 1. E+04 1.E+06 -180 1.E+08 FREQUENCY [Hz] Fig. 176 Voltage Gain – Frequency (VCC/VEE=+15[V]/-15[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. PHASE [deg] 22/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA4510 family 800 POWER DISSIPATION [mW] . BA4510 family Technical Note 10 -20℃ BA4510 family 10 7V BA4510 family SUPPLY CURRENT [mA] 25℃ BA4510F SUPPLY CURRENT [mA] 600 8 8 5V 6 75℃ 6 400 BA4510FV 4 4 3V 200 2 2 0 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 125 0 0 2 4 6 SUPPLY VOLTAGE [V] 8 0 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] Fig. 177 Derating Curve 3 2 OUTPUT VOLTAGE [V] VOH BA4510 family Fig. 178 Supply Current – Supply Voltage 4 BA4510 family Fig. 179 Supply Current – Ambient Temperature 3 BA4510 family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 3 2 1 0 -1 VOL VOH MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 2 VOH 1 0 -1 VOL 1 0 -1 VOL -2 -3 -4 -2 -3 0.1 1 10 100 1000 LOAD RESISTANCE [kΩ] 10000 -2 -3 ±1.0 ±1.5 ±2.0 ±2.5 ±3.0 ±3.5 SUPPLY VOLTAGE [V] ±4.0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 Fig. 180 Output Voltage – Load Resistance (VCC/VEE=2.5[V]/-2.5[V],Ta=25[℃]) 3.0 BA4510 family Fig. 181 Maximum Output Voltage – Supply Voltage (RL=10[kΩ],Ta=25[℃]) 0.0 BA4510 family Fig. 182 Maximum Output Voltage – Ambient Temperature (VCC/VEE=2.5[V]/-2.5[V],RL=10[kΩ]) 6.0 INPUT OFFSET VOLTAGE [mV] 4.0 -20°C BA4510 family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 2.5 2.0 VOH MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] -0.5 -1.0 -1.5 VOL 2.0 0.0 -2.0 -4.0 -6.0 75°C 25°C 1.5 1.0 0.5 0.0 0 0.4 0.8 1.2 1.6 OUTPUT SOURCE CURRENT [mA] 2 -2.0 -2.5 -3.0 0 2 4 6 8 OUTPUT SINK CURRENT [mA] 10 ±1.0 ±1.5 ±2.0 ±2.5 ±3.0 ±3.5 ±4.0 Fig. 183 Maximum Output Voltage– Output Source Current (VCC/VEE=2.5[V]/-2.5[V],Ta=25[℃]) 2.0 BA4510 family Fig. 184 Maximum Output Voltage– Output Sink Current (VCC/VEE=2.5[V]/-2.5[V],Ta=25[℃]) 300 250 75°C BA4510 family Fig. 185 Input Offset Voltage – Supply Voltage (Vicm=0[V],Vout=0[V]) 300 250 INPUT BIAS CURRENT [nA] ±3.5V BA4510 family SUPPLY VOLTAGE [V] INPUT OFFSET VOLTAGE [mV] 1.5 ±1.5V INPUT BIAS CURRENT [nA ] 200 150 100 50 0 25°C 200 150 100 50 0 ±2.5V 1.0 ±2.5V -20°C ±1.5V 0.5 ±3.5V 0.0 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] ±1.0 ±1.5 ±2.0 ±2.5 ±3.0 ±3.5 ±4.0 -50 -25 0 25 50 75 100 SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [°C] Fig. 186 Input Offset Voltage – Ambient Temperature (Vicm=0[V],Vout=0[V]) (*) The above data is ability value of sample, it is not guaranteed. Fig. 187 Input Bias Current – Supply Voltage (Vicm=0[V],Vout=0[V]) Fig. 188 Input Bias Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 23/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA4510 family 20 15 10 5 0 -5 75°C 25°C -20°C BA4510 family BA4510 family Technical Note 5 INPUT OFFSET VOLTAGE [mV] BA4510 family 75℃ 20 INPUT OFFSET CURRENT [nA] 15 10 5 0 -5 -10 -15 -20 ±3.5V ±2.5V INPUT OFFSET CURRENT [nA] 0 ±1.5V -5 25℃ -10 -20℃ -10 -15 -20 ±1.0 -15 -20 ±1.5 ±2.0 ±2.5 ±3.0 ±3.5 SUPPLY VOLTAGE [V] ±4.0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 -3 -2 -1 0 1 2 3 COMMON MODE INPUT VOLTAGE [V] Fig. 189 Input Offset Current – Supply Voltage (Vicm=0[V],Vout=0[V]) 150 LARGE SIGNAL VOLTAGE GAIN [dB] BA4510 family Fig. 190 Input Offset Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) 120 100 2.5V BA4510 family Fig. 191 Input Offset Voltage– Common Mode Input Voltage (VCC/VEE=2.5[V]/-2.5[V]) POWER SUPPLY REJECTION RATIO [dB] 120 100 80 60 40 20 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 BA4510 family 120 2.5V COMMON MODE REJECTION RATIO [dB] 100 90 80 60 40 20 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 60 30 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] Fig. 192 Large Signal Voltage Gain – Ambient Temperature 10 BA4510 family Fig. 193 Common Mode Rejection Ratio – Ambient Temperature 10 BA4510 family Fig. 194 Power Supply Rejection Ratio – Ambient Temperature 1 TOTAL HARMONIC DISTORTION [%] BA4510 family 8 SLEW RATE L-H [V/us] SLEW RATE H-L [V/us] ±3.5V 8 ±3.5V 1kHz 0.1 6 ±2.5V 6 ±2.5V 20Hz 20kHz 4 4 ±1.5V 0.01 2 2 ±1.5V 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 0.001 0.01 0.1 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 195 Slew Rate L-H – Ambient Temperature 40 EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] BA4510 family Fig. 196 Slew Rate H-L – Ambient Temperature 60 50 BA4510 family Fig. 197 Total Harmonic Distortion – Output Voltage (VCC/VEE=2.5[V]/-2.5[V],RL=3[kΩ] 80[kHz]-LPF,Ta=25[℃]) 0 -30 -60 Phase VOLTAGE GAIN [dB] GAIN [dB] 30 Gain 30 20 10 -90 -120 -150 20 10 0 1 10 100 1000 FREQUENCY [Hz] 10000 0 -180 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 FREQUENCY [Hz] Fig. 198 Equivalent Input Noise Voltage – Frequency (VCC/VEE=2.5[V]/-2.5[V]) Fig. 199 Voltage Gain – Frequency (VCC/VEE=2.5[V]/-2.5[V],Av=40[dB],RL=10[kΩ]) (*) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. PHASE [deg] 40 24/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA2115 family . 1000 BA2115 family Technical Note 7 . 6 BA2115 family 7 6 SUPPLY CURRENT [mA] 5 4 3 2 1 0 3.0V 5.0V 14.0V BA2115 family POWER DISSIPATION [mW] SUPPLY CURRENT [mA] 800 BA2115F -40℃ 5 25℃ 600 4 85℃ 400 BA2115FVM 3 2 1 0 200 0 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 125 0 5 10 SUPPLY VOLTAGE [V] 15 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 Fig. 200 Derating Curve 3 2 OUTPUT VOLTAGE [V] 1 0 -1 VOL BA2115 family Fig. 201 Supply Current – Supply Voltage 10 BA2115 family Fig. 202 Supply Current – Ambient Temperature 12 OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE [V] 8 4 0 -4 -8 -12 VOH BA2115 family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 8 6 4 2 0 -2 -4 -6 -8 -10 ±2 ±3 VOL VOH VOH VOL -2 -3 0.1 1 10 100 1000 LOAD RESISTANCE [kΩ] 10000 ±4 ±5 ±6 ±7 SUPPLY VOLTAGE [V] ±8 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 Fig. 203 Output Voltage – Load Resistance (VCC/VEE=+2.5[V]/-2.5[V]) 3.0 BA2115 family Fig. 204 Maximum Output Voltage – Supply Voltage (RL=10[kΩ]) 0 BA2115 family Fig. 205 Maximum Output Voltage – Ambient Temperature (VCC/VEE=+7.5[V]/-7.5[V],RL=10[kΩ]) 6 INPUT OFFSET VOLTAGE [mV] 4 2 0 -2 -4 -6 BA2115 family MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 2.5 2.0 1.5 1.0 0.5 0.0 0.0 0.4 0.8 1.2 1.6 2.0 OUTPUT SOURCE CURRENT [mA] VOH MAXIMUM OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] -0.5 -1 -1.5 VOL -2 -2.5 -3 0 2 4 6 8 10 OUTPUT SINK CURRENT [mA] ±1 ±2 ±3 ±4 ±5 ±6 ±7 ±8 SUPPLY VOLTAGE [V] Fig. 206 Maximum Output Voltage – Output Source Current (VCC/VEE=+2.5[V]/-2.5[V]) 3 INPUT OFFSET VOLTAGE [mV] 2 1 ±2.5V ±7.0V BA2115 family Fig. 207 Maximum Output Voltage – Output Sink Current (VCC/VEE=+2.5[V]/-2.5[V]) 250 .. BA2115 family Fig. 208 Input Offset Voltage – Supply Voltage (Vicm=0[V], Vout=0[V]) 250 . ±1.5V BA2115 family INPUT BIAS CURRENT [nA] 25℃ -40℃ INPUT BIAS CURRENT [nA] 200 200 ±2.5V 150 85℃ 150 ±7.0V 0 -1 -2 -3 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] 100 100 ±1.5V 50 50 0 ±1 ±2 ±3 ±4 ±5 ±6 ±7 ±8 SUPPLY VOLTAGE [V] 0 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] Fig. 209 Input Offset Voltage – Ambient Temperature Fig. 210 Input Bias Current – Supply Voltage (Vicm=0[V], Vout=0[V]) Fig. 211 Input Bias Current – Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (*) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 25/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ○BA2115 family 40 30 20 10 0 -10 -20 -30 -40 ±1 ±2 ±3 ±4 ±5 ±6 SUPPLY VOLTAGE [V] ±7 ±8 85℃ -40℃ 25℃ Technical Note BA2115 family BA2115 family 40 INPUT OFFSET CURRENT [nA] 30 20 10 0 -10 -20 -30 -40 -50 -25 ±2.5V ±7.0V ±1.5V BA2115 family 20 INPUT OFFSET VOLTAGE [mV] 15 10 5 0 -5 -10 -15 -20 85℃ 25℃ -40℃ INPUT OFFSET CURRENT [nA] . 75 AMBIENT TEMPERATURE [℃] 0 25 50 100 -2.5 -2 -1.5 -1 -0.5 0 0.5 1 1.5 2 2.5 COMMON MODE INPUT VOLTAGE [V] Fig. 212 Input Offset Current – Supply Voltage (Vicm=0[V],Vout=0[V]) 150 LARGE SIGNAL VOLTAGE GAIN [dB] . 125 100 75 50 25 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 BA2115 family Fig. 213 Input Offset Current – Ambient Temperature (Vicm=0[V],Vout=0[V]) COMMON MODE REJECTION RATIO [dB] . 150 125 100 75 50 25 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 BA2115 family Fig. 214 Input Offset Voltage – Common Mode Input Voltage (VCC/VEE=+2.5[V]/-2.5[V],Vout=0[V]) 150 125 100 75 50 25 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 BA2115 family Fig. 215 Large Signal Voltage Gain – Ambient Temperature (VCC/VEE=+2.5[V]/-2.5[V]) 7 6 SLEW RATE L-H [V/us] BA2115 family Fig. 216 Common Mode Rejection Ratio – Ambient Temperature (VCC/VEE=+2.5[V]/-2.5[V]) 7.0 6.0 SLEW RATE H-L [V/us] BA2115 family POWER SUPPLY REJECTION RATIO [dB] . Fig. 217 Power Supply Rejection Ratio – Ambient Temperature (VCC/VEE=+2.5[V]/-2.5[V]) 1 TOTAL HARMONIC DISTORTION [%] BA2115 family 5 4 3 2 1 0 ±1 -40℃ 25℃ 5.0 4.0 -40℃ 25℃ 0.1 20kHz 85℃ 85℃ 3.0 2.0 1.0 0.0 0.01 1kHz 20Hz 0.001 ±1 ±2 ±3 ±4 ±5 ±6 SUPPLY VOLTAGE [V] ±7 ±8 0.01 0.1 1 OUTPUT VOLTAGE [Vrms] 10 ±2 ±3 ±4 ±5 ±6 SUPPLY VOLTAGE[V] ±7 ±8 Fig. 218 Slew Rate L-H – Supply Voltage 40 EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] BA2115 family Fig. 219 Slew Rate H-L – Supply Voltage 50 BA2115 family Phase Fig. 220 Total Harmonic Distortion – Output Voltage 0 -30 (VCC/VEE=2.5[V]/-2.5[V],RL=3[kΩ] 80[kHz]-LPF,Ta=25[℃]) VOLTAGE [dB] . [dB] GAIN GAIN 30 40 Gain 30 -90 20 -120 10 -150 20 10 0 1 100 FREQUENCY [Hz] 10000 0 -180 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 FREQUENCY [Hz] Fig. 221 Equivalent Input Noise Voltage – Frequency (VCC/VEE=2.5[V]/-2.5[V]) Fig. 222 Voltage Gain – Frequency (VCC/VEE=2.5[V]/-2.5[V],Av=40[dB],RL=10[kΩ]) PHASE [deg] . -60 Fig. 223 (*) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 26/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ●Schematic diagram VCC VCC Technical Note －IN ＋IN VOUT －IN ＋IN VOUT Fig. 224 Simplified schematic (BA4558/BA4558R/BA15218/ BA4560/BA4560R/BA4580R) ) VCC VEE VEE Fig. 225 Simplified schematic (BA14741) VCC －IN －IN ＋IN VOUT ＋IN VOUT VEE VEE Fig. 226 Simplified schematic (BA15532) ●Test circuit1 NULL method VCC,VEE,EK,Vicm Unit : [V], Vicm=0[V] For all parameter BA4558/BA4558R Parameter VF VF1 VF2 VF3 Input Bias Current Large Signal Voltage Gain Common-mode Rejection Ratio (Input Common-mode Voltage Range) Power Supply Rejection Ratio VF9 VF10 ON ON OFF 4 15 -4 -15 0 0 2 16 VF8 VF4 VF5 VF6 VF7 ON ON OFF ON ON ON S1 S2 S3(*23) BA4560/BA4560R Vcc Input Offset Voltage Input Offset Current ON OFF OFF ON ON OFF ON OFF OFF OFF OFF 15 15 15 15 15 15 3 27 VEE -15 -15 -15 -15 -15 -15 -27 -3 EK 0 0 0 0 -10 10 12 -12 Vcc 15 15 15 15 15 15 3 27 Fig. 227 Simplified schematic (BA4510/BA2115) BA4580R BA15218/BA14741 VEE -15 -15 -15 -15 -15 -15 -27 -3 -2 -16 EK 0 0 0 0 -10 10 12 -12 0 0 BA15532 Vcc 15 15 15 15 15 15 3 27 3 20 VEE -15 -15 -15 -15 -15 -15 -27 -3 -3 -20 EK 0 0 0 0 -10 10 12 -12 0 0 Vcc 2.5 2.5 2.5 2.5 2.5 2.5 1.5 3.5 BA4510 VEE 2.5 2.5 2.5 2.5 2.5 2.5 1.5 3.5 EK 0 0 0 0 -1.0 1.0 -1.0 1.0 0 0 Vcc 2.5 2.5 2.5 2.5 2.5 2.5 1.5 3.5 0.75 7.0 C2 0.1[μF] BA2115 VEE 2.5 2.5 2.5 2.5 2.5 2.5 1.5 3.5 -1.25 7.0 EK 0 0 0 0 -1.0 1.0 -1.0 Calculation 1 2 3 4 5 1.0 0 0 1.25 -1.25 3.0 -3.0 6 (*23) S3 is always ON for BA15532. -Calculation1. Input Offset Voltage (Vio) 2. Input Offset Current (Iio) Vio = | VF1 | 1 + Rf / Rs | VF2－VF1 | [V] Rf 50[kΩ] RK C1 0.1[μF] +15[V] DUT S3 VEE C3 1000[pF] RK 500[kΩ] NULL Iio = Ri ×(1 + Rf / Rs) [A] Rs 50[Ω] S1 Ri 10[kΩ] 10[kΩ] Ri S2 V CC EK 500[kΩ] 3. Input Bias Current (Ib) Ib = | VF4－VF3 | 2×Ri× (1 + Rf / Rs) [A] Vic m 50[Ω] Rs RL -15[V] V VF 4. Large Signal Voltage Gain (Av) Av = 20×Log ΔEK×(1+Rf /Rs) |VF5-VF6| [dB] Fig. 228 Test circuit 1 (one channel only) 5. 6. Common-mode Rejection Ratio (CMRR) Power Supply Rejection Ratio (PSRR) PSRR = 20×Log CMRR = 20×Log ΔVicm×(1+Rf /Rs) |VF8-VF7| ΔVcc×(1+Rf /Rs) |VF10-VF9| [dB] [dB] www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 27/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ●Test circuit2 switch condition SW No. Supply Current Maximum Output Voltage Slew Rate Gain Bandwidth Product Total Harmonic Distortion Input Noise Voltage (*24) Load Resistance Output Current SW 1 OFF OFF OFF OFF OFF ON ON SW 2 OFF OFF OFF OFF ON OFF OFF SW 3 OFF ON ON OFF OFF OFF OFF SW 4 ON OFF OFF ON OFF OFF OFF SW 5 OFF OFF OFF OFF ON ON ON SW 6 ON OFF OFF OFF ON OFF ON SW 7 OFF ON ON OFF OFF ON OFF SW 8 OFF OFF OFF ON OFF OFF OFF SW 9 OFF ON OFF ON ON ON OFF SW 10 OFF OFF OFF ON ON ON OFF SW 11 OFF OFF OFF OFF ON ON ON Technical Note SW 12 OFF OFF ON OFF OFF OFF OFF SW 13 OFF ON ON OFF OFF OFF OFF SW 14 OFF ON OFF OFF OFF OFF OFF (*24) this condition refers only to BA4558Rfamily, BA4560Rfamily voltage 電圧 SW4 VH SW5 R2 VCC A VL － SW1 SW2 SW3 SW6 SW7 SW8 VEE ＋ SW9 SW10 SW11 SW12 SW13 SW14 voltage Input 入力電圧波形 Voltage Waveform time 時間 電圧 VH A SR＝ΔV/Δt RS R1 ΔV ～ VIN- VIN+ ～ RL CL V ～ V VOU T VL Δt time Output Voltage Waveform 時間 出力電圧波形 Fig. 229. Test circuit2 (one channel only) Fig. 230 Slew rate input output wave ●Test circuit3 Channel separation VCC VCC R1//R2 R1//R2 OTHER CH VEE R1 VIN R2 VEE R1 R2 V V VOUT1 =0.5[Vrms] VOUT2 CS＝20 ×log 100×VOUT1 VOUT2 Fig. 231Test circuit3 (VCC=+15[V],VEE=-15[V],R1=1[kΩ],R2=100[kΩ]) www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 28/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Description of electrical characteristics Described here are the terms of electric characteristics used in this technical note. Items and symbols used are also shown. Note that item name and symbol and their meaning may differ from those on another manufacture’s document or general document. 1. Absolute maximum ratings Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of absolute maximum rating or use out of absolute maximum rated temperature environment may cause deterioration of characteristics. 1.1 Power supply voltage(VCC-VEE) Indicates the maximum voltage that can be applied between the positive power supply terminal and negative power supply terminal without deterioration or destruction of characteristics of internal circuit. Differential input voltage(Vid) Indicates the maximum voltage that can be applied between non-inverting terminal and inverting terminal without deterioration and destruction of characteristics of IC. Input common-mode voltage range(Vicm) Indicates the maximum voltage that can be applied to non-inverting terminal and inverting terminal without deterioration or destruction ofcharacteristics. Input common-mode voltage range of the maximum ratings not assure normal operation of IC. When normal operation of IC is desired, the input common-mode voltage of characteristics item must be followed. Power dissipation(Pd) Indicates the power that can be consumed by specified mounted board at the ambient temperature 25℃(normal temperature). As forpackage product, Pd is determined by the temperature that can be permitted by IC chip in the package(maximum junction temperature)and thermal resistance of the package. 1.2 1.3 1.4 2. Electrical characteristics item 2.1 Input offset voltage(Vio) Indicates the voltage difference between non-inverting terminal and inverting terminal. It can be translated into the input voltagedifference required for setting the output voltage at 0 [V] . 2.3 2.5 Input offset current(Iio) Indicates the difference of input bias current between non-inverting terminal and inverting terminal. Input bias current(Ib) Indicates the current that flows into or out of the input terminal. It is defined by the average of input bias current at non-inverting terminaland input bias current at inverting terminal. Circuit current(ICC) Indicates the IC current that flows under specified conditions and no-load steady status. High level output voltage / Low level output voltage(VOH/VOL) Indicates the voltage range that can be output by the IC under specified load condition. It is typically divided into high-level output voltageand low-level output voltage. High-level output voltage indicates the upper limit of output voltage. Low-level output voltage indicates thelower limit. Large signal voltage gain(AV) Indicates the amplifying rate (gain) of output voltage against the voltage difference between non-inverting terminal and inverting terminal.It is normally the amplifying rate (gain) with reference to DC voltage. Av = (Output voltage fluctuation) / (Input offset fluctuation) Input common-mode voltage range(Vicm) Indicates the input voltage range where IC operates normally. 2.6 2.7 2.8 2.9 2.10 Common-mode rejection ratio(CMRR) Indicates the ratio of fluctuation of input offset voltage when in-phase input voltage is changed. It is normally the fluctuation of DC. CMRR = (Change of Input common-mode voltage) / (Input offset fluctuation) 2.11 Power supply rejection ratio(PSRR) Indicates the ratio of fluctuation of input offset voltage when supply voltage is changed. It is normally the fluctuation of DC. PSRR = (Change of power supply voltage) / (Input offset fluctuation) 2.13 Channel separation(CS) Indicates the fluctuation of input offset voltage or that of output voltage with reference to the change of output voltage of driven channel. 2.14 Slew rate(SR) Indicates the time fluctuation ratio of voltage output when step input signal is applied. 2.12 Unity gain frequency(ft) Indicates a frequency where the voltage gain of Op-Amp is 1. 2.13 Total harmonic distortion + Noise(THD+N) Indicates the fluctuation of input offset voltage or that of output voltage with reference to the change of output voltage of driven channel. 2.14 Input referred noise voltage(Vn) Indicates a noise voltage generated inside the operational amplifier equivalent by ideal voltage source connected in series with input terminal. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 29/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Derating curve Power dissipation (total loss) indicates the power that can be consumed by IC at Ta=25℃(normal temperature).IC is heated when it consumed power, and the temperature of IC ship becomes higher than ambient temperature. The temperature that can be accepted by IC chip depends on circuit configuration, manufacturing process, and consumable power is limited. Power dissipation is determined by the temperature allowed in IC chip (maximum junction temperature) and thermal resistance of package (heat dissipation capability). The maximum junction temperature is typically equal to the maximum value in the storage temperature range. Heat generated by consumed power of IC radiates from the mold resin or lead frame of the package. The parameter which indicates this heat dissipation capability (hardness of heat release) is called thermal resistance, represented by the symbol θj-a[℃ /W]. The temperature of IC inside the package can be estimated by this thermal resistance. Fig.232 (a) shows the model of thermal resistance of the package. Thermal resistance θja, ambient temperature Ta, junction temperature Tj, and power dissipation Pd can be calculated by the equation below : θja ＝ (Tj－Ta) / Pd [℃/W] ・・・・・ (Ⅰ) Derating curve in Fig.232 (b) indicates power that can be consumed by IC with reference to ambient temperature. Power that can be consumed by IC with reference to ambient temperature. Power that can be consumed by IC begins to attenuate at certain ambient temperature. This gradient, is determined by thermal resistance θja. Thermal resistance θja depends on chip size, power consumption, package, ambient temperature, package condition, wind velocity, etc even when the same of package is used. Thermal reduction curve indicates a reference value measured at a specified condition. Fig.233(a), (b) ,(c) ,(d) show a derating curve for an example of BA4558, BA4560, BA4558R, BA4560R, BA4580R, BA15218, BA14741, BA15532, BA4510, BA2115. θja = ( Tj ー Ta ) / Pd [℃/W] Ambient temperature Ta [℃] P1 ’ θja2 LSIの消費電力[W] Power dissipation of LSI [W] Pd(max) 周囲温度 Ta [℃] P2 θja2 < θja1 θja2 ’ Tj(max) Tj(max) Chip surface temperature ] [℃] チップ 表面温度 Tj [℃ Tj Power 消費電力 P [W][W] dissipation P 0 25 ’ θja1 50 θja1 75 100 125 150 Ambient周囲温度Ta[℃] Ta [℃] temperature (a) Thermal resistance Fig. 232 1000 BA4558RF BA4560RF BA4580RF (b) Derating curve Thermal resistance and derating curve 1000 800 780mW( *1) 690mW( *2) 590mW (*3) Power Dissipation [mW] 許容損失　 　 BA4558RFV BA4560RFV BA4580RFV 800 Power Dissipation[mW] 許容損失　Pd　 [mW] Pd [mW] 600 BA4558RFVM BA4560RFVM BA4580RFVM 620mW (*4) BA4558F BA4560F BA15218F BA14741F 600 490mW (*5) BA15532F 400 400 200 200 0 0 25 50 75 100 125 150 0 0 25 50 75 100 125 Ambient temperature] [℃] 周囲温度　Ta　[℃ (a)BA4558R/BA4560R/BA4580R family 1000 Ambient temperature][℃] 周囲温度　Ta　[℃ (b)BA4558/BA4560/BA15218/BA14741/BA15532 family 1000 800 800 許容損失　Pd　 [mW] BA4510F 780mW (*3) BA2115F Power Dissipation[mW] 許容損失　Pd　 [mW] 620mW( *1) Power Dissipation [mW] 600 550mW (*2) 600 590mW (*4) BA2115FVM BA4510FV 400 400 200 200 0 0 25 50 75 100 125 0 0 25 50 75 100 125 150 Ambient temperature] [℃] 周囲温度　Ta　[℃ Ambient temperature] [℃] 周囲温度　Ta　[℃ (c)BA4510ファミリ (a) BA4510 family (d)BA2115 family (b) BA2115ファミリ (*25) 6.2 (*26) 5.5 (*27) 4.7 (*28) 6.2 (*29) 4.9 Unit [mW/℃] When using the unit above Ta=25[℃], subtract the value above per degree[℃]. Permissible dissipation is the value when FR4 glass epoxy board 70[mm]×70[mm]×1.6[mm] (cooper foil area below 3[％]) is mounted. Fig. 233 Derating curve www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 30/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ●Cautions on use 1) Processing of unused circuit It is recommended to apply connection (see the Fig.234) and set the noninverting input terminal at the potential within input common-mode voltage range (Vicm), for any unused circuit. 2) Input voltage Applying VEE+36[V](BA4550R,BA4560R,BA4580R family), VEE+14[V] (BA2115 family) to the input terminal is possible without causing deterioration of the electrical characteristics or destruction, irrespective of the supply voltage. However, this does not ensure normal circuit operation. Please note that the circuit operates normally only when the input voltage is within the common mode input voltage range of the electric characteristics. 3) Maximum output voltage Because the output voltage range becomes narrow as the output current Increases, design the application with margin by considering changes in electrical characteristics and temperature characteristics. 4) Short-circuit of output terminal When output terminal and VCC or VEE terminal are shorted, excessive Output current may flow under some conditions, and heating may destroy IC. It is necessary to connect a resistor as shown in Fig.2, thereby Protecting against load shorting. 5) Power supply (split supply / single supply) in used Op-amp operates when specified voltage is applied between VCC and VEE. Therefore, the single supply Op-Amp can be used for double supply Op-Amp as well. connect 同相入力電圧 範囲内の電位 to Vicm Technical Note VCC VEE Fig. 234The example of application circuit for unused op-amp VCC protection resistor 保護抵抗 VEE Fig. 235The example of output short protection 6) Power dissipation (Pd) Use a thermal design that allows for a sufficient margin in light of the power dissipation (Pd) in actual operating conditions. 7) Short-circuit between pins and wrong mounting Pay attention to the assembly direction of the ICs. Wrong mounting direction or shorts between terminals, GND, or other components on the circuits, can damage the IC. 8) Use in strong electromagnetic field Using the ICs in strong electromagnetic field can cause operation malfunction. 9) Radiation This IC is not designed to be radiation-resistant. 10) Handing of IC When stress is applied to IC because of deflection or bend of board, the characteristics may fluctuate due to piezoelectric (piezo) effect. 11) Inspection on set board During testing, turn on or off the power before mounting or dismounting the board from the test Jig. Do not power up the board without waiting for the output capacitors to discharge. The capacitors in the low output impedanceterminal can stress the device. Pay attention to the electro static voltages during IC handling, transportation, and storage. 12) Output capacitor When VCC terminal is shorted to VEE (GND) potential and an electric charge has accumulated on the external capacitor, connected to output terminal, accumulated charge may be discharged VCC terminal via the parasitic element within the circuit or terminal protection element. The element in the circuit may be damaged (thermal destruction). When using this IC for an application circuit where there is oscillation, output capacitor load does not occur, as when using this IC as a voltage comparator. Set the capacitor connected to output terminal below 0.1[μF] in order to prevent damage to IC. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 31/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ●Ordering part number Technical Note B A 4 Part No. 4558 4560 4510 14741 15532 5 6 0 F V - E 2 Part No. 4558R 4560R 4580R 15218 2115 Package F: SOP8 SOP14 FV: SSOP-B8 FVM: MSOP8 Packaging and forming specification E2: Embossed tape and reel (SOP8/SOP14/SSOP-B8) TR: Embossed tape and reel (MSOP8) SOP8 5.0±0.2 (MAX 5.35 include BURR) 8 7 6 5 +6° 4° −4° Tape Quantity 0.9±0.15 0.3MIN Embossed carrier tape 2500pcs E2 The direction is the 1pin of product is at the upper left when you hold 6.2±0.3 4.4±0.2 Direction of feed ( reel on the left hand and you pull out the tape on the right hand ) 12 3 4 0.595 1.5±0.1 +0.1 0.17 -0.05 S 0.11 1.27 0.42±0.1 1pin (Unit : mm) Direction of feed Reel ∗ Order quantity needs to be multiple of the minimum quantity. SOP14 8.7 ± 0.2 (MAX 9.05 include BURR) 14 8 Tape Quantity Direction of feed 0.3MIN Embossed carrier tape 2500pcs E2 The direction is the 1pin of product is at the upper left when you hold 6.2 ± 0.3 4.4 ± 0.2 ( reel on the left hand and you pull out the tape on the right hand ) 1 7 0.15 ± 0.1 1.5 ± 0.1 0.11 1.27 0.4 ± 0.1 0.1 1pin (Unit : mm) Direction of feed Reel ∗ Order quantity needs to be multiple of the minimum quantity. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 32/33 2009.05 - Rev.A BA4558F,BA4560F,BA4558RF/FV/FVM,BA4560RF/FV/FVM,BA4580RF/FVM, BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note SSOP-B8 3.0 ± 0.2 (MAX 3.35 include BURR) 876 5 Tape Quantity 0.3MIN Embossed carrier tape 2500pcs E2 The direction is the 1pin of product is at the upper left when you hold 6.4 ± 0.3 4.4 ± 0.2 Direction of feed ( reel on the left hand and you pull out the tape on the right hand ) 1234 1.15 ± 0.1 0.15 ± 0.1 S 0.1 +0.06 0.22 -0.04 0.08 M 0.1 (0.52) 0.65 1pin (Unit : mm) Direction of feed Reel ∗ Order quantity needs to be multiple of the minimum quantity. MSOP8 2.9±0.1 (MAX 3.25 include BURR) 8765 Tape 0.29±0.15 0.6±0.2 +6° 4° −4° Embossed carrier tape 3000pcs TR The direction is the 1pin of product is at the upper right when you hold Quantity Direction of feed 4.0±0.2 2.8±0.1 ( reel on the left hand and you pull out the tape on the right hand 1pin ) 1 234 1PIN MARK 0.475 S +0.05 0.22 –0.04 0.08 S 0.65 +0.05 0.145 –0.03 0.9MAX 0.75±0.05 0.08±0.05 Direction of feed (Unit : mm) Reel ∗ Order quantity needs to be multiple of the minimum quantity. www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 33/33 2009.05 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. R0039A