BA6208F

Motor driver ICs Reversible motor driver BA6208 / BA6208F The BA6208 and BA6208F are monolithic ICs used for driving reversible motors. They allow control of reversible motors in cassette players and other electrical equipment by using TTL-level logic signals. The ICs contain a logic section, which controls forward and reverse rotations as well as forced stop, and an output power section, which can supply an output current of up to 100mA (typical) according to the logic control. FFeatures 1) Motor driving power transistors are built in (100mA typically). 2) Brake is applied when stopping the motor (when inputs A and B are both HIGH level). 3) Built-in diode to absorb surge currents. FAbsolute maximum ratings (Ta = 25_C) 4) Very low standby circuit current when inputs A and B are both LOW level. 5) Wide range of operating supply voltage (4.5 X 15.0V). 6) Direct control with the TTL logic. FRecommended operating conditions (Ta = 25_C) FInput truth table 384 Motor driver ICs FElectrical characteristics (unless otherwise noted, Ta = 25_C and VCC = 9V) BA6208 / BA6208F FInternal circuit configuration FExternal dimensions (Units: mm) 385