BCX17

BCX17 Transistors PNP small signal transistor BCX17 Small load switch transistor with high gain and Low saturation voltage. Features 1) High gain and low saturation voltage. 2) Ideal for small load switching applications. 3) Complements the BCX19. Dimensions (Unit : mm) SST3 2.9 0.4 (3) 0.95 0.45 Packaging specifications Package Type BCX17 Code Basic ordering unit (pieces) Taping T116 3000 (1)Emitter (2)Base (3)Collector (2) (1) 0.95 0.95 1.9 1.3 2.4 0.15 Each lead has same dimensions Abbreviated symbol : GT1 Absolute maximum ratings (Ta=25°C) Parameter Collector-emitter voltage (VBE=0) Collector-emitter voltage (open base) Emitter-base voltage Collector current Collector current (peak value) Symbol VCES VCEO VEBO IC ICM Limits −50 −45 −5 −0.5 −1 0.2 Collector power dissipation Junction temperature Storage temperature PC Tj Tstg 0.35 0.425 150 −65 to 150 Unit V V V A A W W W ∗ ∗2 °C °C ∗ Mounted on a 7×5×0.6 mm CERAMIC SUBSTRATE ∗2 Mounted on a 15×15×0.6 mm CERAMIC SUBSTRATE Electrical characteristics (Ta=25°C) Parameter Symbol Min. −50 −45 −5 − − − − 100 Typ. − − − − − − − − − − 200 − Max. − − − −0.1 −10 −0.62 −1.2 600 − − − −5 Unit V V V IC= −50µA IC= −10mA IE= −50µA VCB= −20V VEB= −5V Conditions Collector-emitter breakdown voltage BVCES Collector-emitter breakdown voltage BVCEO Emitter-base breakdown voltage Collector-base cutoff current Emitter-base cutoff current Collector-emitter saturation voltage Base-emitter voltage BVEBO ICBO IEBO VCE(sat) VBE(on) µA µA V V − IC/IB= −500mA/ −50mA VCE/IC= −1V/ −500mA VCE= −1V, IC= −100mA VCE= −1V, IC= −300mA VCE= −1V, IC= −500mA VCE= −5V, IE= −20mA, f=100MHz VCB= −20V, Ta=150°C DC current transfer ratio hFE 70 40 − − Transition frequency Collector-base cutoff current fT ICBO MHz µA 0.2Min. 1/1 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1