BD33FC0FP-E2

Datasheet Single-Output LDO Regulators 35V Withstand Voltage 1A LDO Regulators BDxxFC0 series ●Description The BDxxFC0 series are low-saturation regulators. The series’ output voltages are Variable, 3.0V, 3.3V, 5.0V, 6.0V, 7.0V, 8.0V, 9.0V, 10.0V, 12.0V and 15.0V and packages are HTSOP-J8, TO252-3, and TO252-5. This series has a built-in over-current protection circuit that prevents the destruction of the IC due to output short circuits and a thermal shutdown circuit that protects the IC from thermal damage due to overloading. (Typ) (Typ) (Max) 4.90mm x 6.00mm x 1.00mm ●Packages HTSOP-J8 ●Key Specifications 1) Output current capability: 1A 2) Output voltage: Variable, 3.0V, 3.3V, 5.0V, 6.0V, 7.0V, 8.0V, 9.0V, 10.0V, 12.0V and 15.0V 3) High output voltage accuracy (Ta=25°C): ±1% 4) Low saturation with PDMOS output 5) Built-in over-current protection circuit that prevents the destruction of the IC due to output short circuits 6) Built-in thermal shutdown circuit for protecting the IC from thermal damage due to overloading 7) Available Ceramic Capacitor to prevent oscillation 8) HTSOP-J8, TO252-3 and TO252-5 packages TO252-3 6.50mm x 9.50mm x 2.50mm TO252-5 6.50mm x 9.50mm x 2.50mm ●Features ・Output Voltage: 1.0V to 15.0V ・Output Voltage Precision(Ta=25°C): ±1% VO+1.0V to 26.5V ・Supply Voltage(VO≧3.0V): ・Supply Voltage(VO＜3.0V): 4.0V to 26.5V ・Output Current: 1A ・Operating Temperature Range: -25°C≦Ta≦+85°C ●Ordering part number B Part Number D x x Output voltage 00: Variable 30: 3.0V 33: 3.3V 50: 5.0V 60: 6.0V 70: 7.0V 80: 8.0V 90: 9.0V J0: 10.0V J2: 12.0V J5: 15.0V F C 0 W x x x - E2 Input Output Voltage Current Enable Package Packaging and forming specification F:35V “W”: Included Enable None: Without Enable EFJ: HTSOP-J8 FP: TO252-3/5 E2: Emboss tape reel C0:1.0A 〇Product structure : Silicon monolithic integrated circuit .www.rohm.com © 2017 ROHM Co., Ltd. All rights reserved. TSZ22111 • 14 • 001 〇This product has no designed protection against radioactive rays 1/38 TSZ02201-0G2G0A600040-1-2 10.Jan.2017 Rev.005 Datasheet BDxxFC0 Series ●Lineup Articles パッケージ Variable 3.0 3.3 5.0 6.0 7.0 8.0 9.0 10.0 12.0 15.0 BDxxFC0WEFJ-E2 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ HTSOP-J8 Reel of 2500 BDxxFC0FP-E2 - - ○ ○ - - - - - - - TO252-3 Reel of 2000 BDxxFC0WFP-E2(Note 1) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ TO252-5 Reel of 2000 (Note 1) under development except for Variable ●Typical Application Circuits 〈Output Voltage Variable Type (With Enable)〉 Vcc Vcc Vo R1 CIN EN COUT FB GND R2 Figure 1. Typical Application Circuit Output Voltage Variable Type(With Enable) 〈Output Voltage Fixed Type (With Enable)〉 Vcc Vo CIN Vcc COUT EN GND Figure 2. Typical Application Circuit Output Voltage Fixed Type(With Enable) 〈Output Voltage Fixed Type (Without Enable)〉 Vcc Vcc Vo CIN COUT GND Figure 3. Typical Application Circuit Output Voltage Fixed Type (Without Enable) www.rohm.com © 2017 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 2/38 TSZ02201-0G2G0A600040-1-2 10.Jan.2017 Rev.005 Datasheet BDxxFC0 Series ●Pin Configuration/Pin Description HTSOP-J8 (TOP VIEW) 〈With Enable (HTSOP-J8)〉 Vo 1 8 Vcc FB/N.C. 2 7 N.C GND 3 6 N.C N.C 4 5 EN Figure 4. Pin Configuration (With Enable) Pin No. 1 Pin name Vo 2 FB/N.C.(Note 1) 3 4 5 6 7 8 Exposed PAD GND N.C. (Note 1) EN N.C. (Note 1) N.C. (Note 1) VCC Pin Function Output pin Feedback pin (Variable Output Type) No Connection (Fixed Output Type) GND pin No Connection (Connect to GND or leave OPEN) Enable pin No Connection (Connect to GND or leave OPEN) No Connection (Connect to GND or leave OPEN) Power supply pin GND Substrate(Connect to GND) (Note 1) N.C. Pin can be open, because it is not connected to the IC. 〈Without Enable (TO252-3)〉 TO252-3 (TOP VIEW) 1 2 3 Figure 5. Pin Description (Without Enable) Pin No. Pin Name Pin Function 1 Vcc Power Supply Pin 2 N.C. (Note 1) No Connection (leave OPEN) 3 Vo Output Pin FIN GND GND (Note 1) N.C.Pin can be open since it is not connected inside of IC. www.rohm.com © 2017 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 3/38 TSZ02201-0G2G0A600040-1-2 10.Jan.2017 Rev.005 Datasheet BDxxFC0 Series 〈With Enable (TO252-5)〉 TO252-5 (TOP VIEW) 1 2 3 4 5 Figure 6. Pin Configuration (With Enable) Pin No. Pin Name Pin Function 1 EN Enable Pin 2 Vcc Power Supply Pin 3 N.C. (Note 1) No Connection (leave OPEN) 4 Vo Output Pin 5 FB/N.C.(Note 1) Variable Pin (Variable Output Type) N.C. Pin (Fixed Output Type) FIN GND GND (Note 1) N.C.Pin can be open since it is not connected inside of IC. www.rohm.com © 2017 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 4/38 TSZ02201-0G2G0A600040-1-2 10.Jan.2017 Rev.005 Datasheet BDxxFC0 Series ●Block diagrams ■ HTSOP-J8 〈BD00FC0WEFJ (Output Voltage Variable Type) with Enable〉 VREF : Bandgap Reference OCP : Over Current Protection Circuit TSD : Thermal Shut Down Circuit Driver : Power Transistor Driver VREF Driver OCP TSD 1 2 EN Vcc 3 4 5 GND Vo FB Figure 7. Block diagrams BD00FC0WEFJ (Output Voltage Variable Type with Enable) ■ HTSOP-J8 〈BDxxFC0WEFJ (Output Voltage Fixed Type) with Enable〉 VREF : OCP : TSD : Driver : Bandgap Reference Over Current Protection Circuit Thermal Shut Down Circuit Power Transistor Driver VREF Driver OCP TSD 1 2 3 4 5 EN Vcc GND Vo N.C. Figure 8. Block diagrams BxxFC0WEFJ (Output Voltage Variable Type with Enable) www.rohm.com © 2017 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 5/38 TSZ02201-0G2G0A600040-1-2 10.Jan.2017 Rev.005 Datasheet BDxxFC0 Series ■TO252-3〈BDxxFC0FP (Output Voltage Fixed Type) without Enable〉 FIN GND VREF : OCP : TSD : Driver : VREF Bandgap Reference Over Current Protection Circuit Thermal Shut Down Circuit Power Transistor Driver Driver OCP TSD 1 2 3 Vcc N.C. Vo Figure 9. Block diagrams BDxxFC0FP (Output Voltage Fixed Type, without Enable) www.rohm.com © 2017 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 6/38 TSZ02201-0G2G0A600040-1-2 10.Jan.2017 Rev.005 Datasheet BDxxFC0 Series ■ TO252-5 〈BD00FC0WFP (Output Voltage Variable Type) With Enable〉 FIN GND VREF : OCP : TSD : Driver : Bandgap Reference Over Current Protection Circuit Thermal Shut Down Circuit Power Transistor Driver VREF Driver OCP TSD 1 2 EN Vcc 3 4 5 N.C. Vo FB Figure 10. Block diagram BD00FC0WFP (Output Voltage Variable Type, with Enable) ■TO252-5〈BDxxFC0WFP (Output Voltage Fixed Type) With Enable〉 FIN GND VREF : OCP : TSD : Driver : Bandgap Reference Over Current Protection Circuit Thermal Shut Down Circuit Power Transistor Driver VREF Driver OCP TSD 1 2 EN Vcc 3 4 5 N.C. Vo N.C. Figure 11. Block diagram BDxxFC0WFP (Output Voltage Fixed Type, with Enable) www.rohm.com © 2017 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 7/38 TSZ02201-0G2G0A600040-1-2 10.Jan.2017 Rev.005 Datasheet BDxxFC0 Series ●Absolute Maximum Ratings (Ta= 25°C) Parameter Supply Voltage *1 EN Voltage *2 Operating Temperature Range Storage Temperature Range Maximum Junction Temperature Symbol Vcc VEN Ta Tstg Tjmax Ratings -0.3 to +35.0 -0.3 to +35.0 -25 to +85 -55 to +150 150 Unit V V ℃ ℃ ℃ *1 Do not exceed Tjmax. *2 Power Supply (Vcc) and EN pin startup sequence does not matter provided they are operated within the power supply voltage range. ●Operating Conditions (-25°C≦Ta≦+85°C) Parameter Symbol Supply Voltage (VO≧3.0V) Vcc Supply Voltage (VO Pin B, the PN junction operates as a parasitic transistor Parasitic diodes occur inevitably in the structure of the IC, and the operation of these parasitic diodes can result in mutual interference among circuits, operational faults, or physical damage. Accordingly, conditions that cause these diodes to operate, such as applying a voltage lower than the GND voltage to an input pin (and thus to the P substrate) should be avoided. Example of monolithic IC structure www.rohm.com © 2017 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 33/38 TSZ02201-0G2G0A600040-1-2 10.Jan.2017 Rev.005 Datasheet BDxxFC0 series ●Physical Dimension Tape and Reel Information Package Name HTSOP-J8 Tape Embossed carrier tape Quantity 2500pcs Direction of feed E2 The direction is the 1pin of product is at the upper left when you hold ( reel on the left hand and you pull out the tape on the right hand Direction of feed 1pin Reel www.rohm.com © 2017 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 ) ∗ Order quantity needs to be multiple of the minimum quantity. 34/38 TSZ02201-0G2G0A600040-1-2 10.Jan.2017 Rev.005 Datasheet BDxxFC0 series Package Name www.rohm.com © 2017 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 TO252-3 35/38 TSZ02201-0G2G0A600040-1-2 10.Jan.2017 Rev.005 Datasheet BDxxFC0 series Package Name www.rohm.com © 2017 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 TO252-5 36/38 TSZ02201-0G2G0A600040-1-2 10.Jan.2017 Rev.005 Datasheet BDxxFC0 series ●Marking Diagram TO252-3 TO252-3 (TOP VIEW) Part Number Marking Output Voltage[V] Part Number Marking 3.3 33FC0 5.0 50FC0 LOT Number 1PIN TO252-5 (TOP VIEW) TO252-5 Part Number Marking LOT Number 1PIN Output Voltage[V] Part Number Marking Variable 00FC0W 3.0 30FC0W 3.3 33FC0W 5.0 50FC0W 6.0 60FC0W 7.0 70FC0W 8.0 80FC0W 9.0 90FC0W 10.0 J0FC0W 12.0 J2FC0W 15.0 J5FC0W Output Voltage[V] Part Number Marking Variable 00FC0W 3.0 30FC0W 3.3 33FC0W 5.0 50FC0W 6.0 60FC0W 7.0 70FC0W 8.0 80FC0W HTSOP-J8 HTSOP-J8 (TOP VIEW) Part Number Marking x x F C 0 W LOT Number 1PIN MARK www.rohm.com © 2017 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 37/38 9.0 90FC0W 10.0 J0FC0W 12.0 J2FC0W 15.0 J5FC0W TSZ02201-0G2G0A600040-1-2 10.Jan.2017 Rev.005 Datasheet BDxxFC0 series ●Revision History Date 27.Aug.2013 Revision 001 20.Oct. 2015 002 02.Dec. 2015 003 16.May. 2016 004 10.Jan. 2017 005 Changes New Release Add BDxxFC0FP and BDxxFC0WFP Change pin name OUT -> Vo P2 Lineup modified The document control number:TSZ02201-0GAG0A600040-1-2 -> TSZ02201-0G2G0A600040-1-2 P8 Power dissipation deleted P8 notes added in electrical characteristics P9 Copper Pattern area modified Misentry modified in Whole page P3,4 Pin name modified in Pin Configuration/Pin Description P8 Product name modified in Operating Conditions *3 P8 Enable condition added in Circuit Current at shutdown mode for preventing mistake P10-12 Comment and Condition added for preventing mistake Figure title changed due to expression difference between Japanese and English datasheet P14-25 Comment and Condition added for preventing mistake Figure title changed due to expression difference between Japanese and English datasheet P13, P26 Measurement setup for reference data modified P29 Figure 76. I/O equivalent modified P29 Duplicated contents deleted in Output Voltage Configuration Method P30 Misentry modified in Operational notes Expression of shutdown mode and shutdown SW changed to Enable www.rohm.com © 2017 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 38/38 TSZ02201-0G2G0A600040-1-2 10.Jan.2017 Rev.005 Notice Precaution on using ROHM Products 1. Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment, OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you (Note 1) intend to use our Products in devices requiring extremely high reliability (such as medical equipment , transport equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific Applications. (Note1) Medical Equipment Classification of the Specific Applications JAPAN USA EU CHINA CLASSⅢ CLASSⅡb CLASSⅢ CLASSⅢ CLASSⅣ CLASSⅢ 2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which a failure or malfunction of our Products may cause. The following are examples of safety measures: [a] Installation of protection circuits or other protective devices to improve system safety [b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure 3. Our Products are designed and manufactured for use under standard conditions and not under any special or extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our Products under any special or extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents [b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust [c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves [e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items [f] Sealing or coating our Products with resin or other coating materials [g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning residue after soldering [h] Use of the Products in places subject to dew condensation 4. The Products are not subject to radiation-proof design. 5. Please verify and confirm characteristics of the final or mounted products in using the Products. 6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied, confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 7. De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in the range that does not exceed the maximum junction temperature. 8. Confirm that operation temperature is within the specified range described in the product specification. 9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in this document. Precaution for Mounting / Circuit board design 1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product performance and reliability. 2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products, please consult with the ROHM representative in advance. For details, please refer to ROHM Mounting specification Notice-PGA-E © 2015 ROHM Co., Ltd. All rights reserved. Rev.003 Precautions Regarding Application Examples and External Circuits 1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the characteristics of the Products and external components, including transient characteristics, as well as static characteristics. 2. You agree that application notes, reference designs, and associated data and information contained in this document are presented only as guidance for Products use. Therefore, in case you use such information, you are solely responsible for it and you must exercise your own independent verification and judgment in the use of such information contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of such information. Precaution for Electrostatic This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control). Precaution for Storage / Transportation 1. Product performance and soldered connections may deteriorate if the Products are stored in the places where: [a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [b] the temperature or humidity exceeds those recommended by ROHM [c] the Products are exposed to direct sunshine or condensation [d] the Products are exposed to high Electrostatic 2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is exceeding the recommended storage time period. 3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads may occur due to excessive stress applied when dropping of a carton. 4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of which storage time is exceeding the recommended storage time period. Precaution for Product Label A two-dimensional barcode printed on ROHM Products label is for ROHM’s internal use only. Precaution for Disposition When disposing Products please dispose them properly using an authorized industry waste company. Precaution for Foreign Exchange and Foreign Trade act Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign trade act, please consult with ROHM in case of export. Precaution Regarding Intellectual Property Rights 1. All information and data including but not limited to application example contained in this document is for reference only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. 2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the Products with other articles such as components, circuits, systems or external equipment (including software). 3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to manufacture or sell products containing the Products, subject to the terms and conditions herein. Other Precaution 1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM. 2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of ROHM. 3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the Products or this document for any military purposes, including but not limited to, the development of mass-destruction weapons. 4. The proper names of companies or products described in this document are trademarks or registered trademarks of ROHM, its affiliated companies or third parties. Notice-PGA-E © 2015 ROHM Co., Ltd. All rights reserved. Rev.003 Datasheet General Precaution 1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents. ROHM shall n ot be in an y way responsible or liabl e for fa ilure, malfunction or acci dent arising from the use of a ny ROHM’s Products against warning, caution or note contained in this document. 2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s representative. 3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccur acy or errors of or concerning such information. Notice – WE © 2015 ROHM Co., Ltd. All rights reserved. Rev.001