BD9582F-ME2

Datasheet EARTH LEAKAGE CURRENT DETECTOR Automotive EARTH LEAKAGE CURRENT DETECTOR IC BD9582F-M ●General Description BD9582F-M integrates leakage detector and amplifier. Especially, it is suitable for high sensitivity and a highspeed operation use, and since the operating temperature range is wide, it can be used for various uses. ●Key Specifications ■ Operating supply voltage range： 12V to 22V ■ Operating temperature range： －40°C to ＋105°C ■ Supply current： 330μA(typ.) ■ Trip voltage： 4.48mV to 11.06mV ■ Output current ability(Ta=－40℃)： －200μA～(min.) ●Features ■ Small temperature fluctuation and high input sensitivity ■ Wide operating temperature range ●Packages SOP8 W(Typ.) x D(Typ.) x H(Max.) 5.00mm x 6.20mm x 1.71mm ●Applications ■ Earth leakage circuit breaker ■ Earth leakage circuit relay ●Typical Application Circuit Example SCR RVS COS VZ 8 7 C1 5 NR SC IN GND OD VR Trip Coil 6 OS Reference voltage output block VS Latch block CVS 1 CIN CVR 2 3 RIN 4 COD ZCT:Zero current transformer TEST SW&R ○Product structure：Silicon monolithic integrated circuit www.rohm.co.jp © 2012 ROHM Co., Ltd. All rights reserved. TSZ22111・14・001 ○This product is not designed protection against radioactive rays. 1/11 TSZ02201-0RCR1GZ00070-1-2 2012.10.29 Rev.002 Datasheet BD9582F-M ●Pin Configurations ●Block Diagrams SOP8 (TOP VIEW) 8 7 VS 7 6 5 1 2 3 4 5 NR SC Latch block Reference voltage output block 8 6 OS VR 1 IN 2 GND 3 OD 4 ●Pin Descriptions Pin No. Symbol Function 1 VR Reference voltage 2 IN Input 3 GND 4 OD Output of input comparator 5 SC Input of latch circuit 6 NR Noise absorption 7 OS Output 8 VS Power supply Ground ●Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit *1 IS 8 mA IN-VR current IIN-VR ±250 mA VR pin current IVR 30 mA IN terminal current IIN 30 mA SC terminal current ISC 5 mA Power Supply voltage VS 36 V Input terminal voltage VVR/IN 17 V VOD/SC/NR/OS 8 V Power dissipation Pd 680 *2 mW Storage temperature Tstg －55 to ＋150 ℃ Supply current OD/SC/NR/OS terminal voltage *1 *2 The power-supply voltage is limited by the internal clamping circuit. To use at temperature above Ta＝25℃ reduce 5.5mW/℃. Mounted on a glass epoxy PCB (70mm×70mm×1.6mm) www.rohm.co.jp © 2012 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 2/11 TSZ02201-0RCR1GZ00070-1-2 2012.10.29 Rev.002 Datasheet BD9582F-M ●Recommended Operating Ratings Parameter Symbol Limits Unit Supply voltage VS 12 to 22 V Operating temperature Topr －40 to ＋105 ℃ CVS 1≦ μF External capacitor between VS and GND External capacitor between OS and GND ≦1 COS μF ●Electrical Characteristics (Unless otherwise specified, VS=12V, GND=0V, Ta=25℃) Limits Temperature range Min. Typ. Max. -40℃ - - 520 25℃ - 330 500 105℃ - - 460 VT -40℃ to +105℃ 4.48 7.50 OD Source current IODSO 25℃ -27.2 OD Sink current IODSI 25℃ Parameter Symbol IS1 Supply current Trip voltage OS Source current IOSSO Unit Conditions μA ΔVIN=VVR-VIN=30mV 11.06 mV VT=ΔVIN=VVR-VIN -20.6 -14.0 μA 16.7 26.0 35.3 μA -40℃ -200 - - 25℃ -100 - - 105℃ -75 - - ΔVIN=VVR-VIN=30mV, VOD=1.2V VOD=0.8V, ΔVIN=VVR-VIN=0mV μA VSC=2.0V, VOS=0.8V VSC=0.2V, VOS=0.2V OS Sink current IOSSI -40℃ to +105℃ 200 - - μA SC ON voltage VSCON 25℃ 1.00 1.24 1.48 V Input clamp voltage VIC -40℃ to +105℃ 4.2 5.5 6.8 V IIC=20mA Differential input clamp voltage VIDC -40℃ to +105℃ 0.5 1.0 1.5 V IIDC=100mA Maximum current voltage VSM 25℃ 26 29 32 V IS=7mA IOS2 -40℃ to +105℃ -100 - - μA IS=900μA,VSC=2.0V VOS=0.8V VSOFF 25℃ 2.7 3.7 4.7 V tON 25℃ 1.8 2.9 4.0 Ms Supply current 2 ＊1 Latch OFF Supply Voltage Operating time ＊2 *1 Supply current 2 is OS source current value when the power supply current(Is=900μA) is given. *2 Operating time is time until output voltage reaches 0.8V after detecting the leakage signal. Conditions : Capacitor(0.047μF) is connected between OD(OS) and GND. www.rohm.co.jp © 2012 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 3/11 TSZ02201-0RCR1GZ00070-1-2 2012.10.29 Rev.002 Datasheet BD9582F-M ●Test circuits 1.IS1 2.VT 3.IODSO VR IN GND OD SC NR OS VS VR IN GND OD SC NR OS VS VR IN GND OD SC NR OS VS 1 2 5 6 7 8 1 2 4 5 6 7 8 1 2 4 5 6 7 8 A IOD 3 4 + A 3 VS IS + ΔVIN ΔVIN 4.IODSI VS V VOD VS ΔVIN 3 5.IOSSO/IOSSI VOD 6.VSCON VR IN GND OD SC NR OS VS VR IN GND OD SC NR OS VS VR IN GND OD SC NR OS VS 1 2 4 5 6 7 8 1 2 4 5 6 7 8 1 2 4 5 6 7 8 A IOD 3 3 VSC + VS + VOD 3 A VS VSC IOS V Vos VOS 7.VIC 8.VIDC 9.VSM VR IN GND OD SC NR OS VS VR IN GND OD SC NR OS VS VR IN GND OD SC NR OS VS 1 2 5 6 7 8 1 2 4 5 6 7 8 1 2 4 5 6 7 8 3 4 3 3 VS VSM V IIDC V IC V VIC IS VIDC 10.IOS2 11.VSOFF 12.tON VR IN GND OD SC NR OS VS VR IN GND OD SC NR OS VS VR IN GND OD SC NR OS VS 1 2 4 5 6 7 8 1 2 4 5 6 7 8 1 2 4 5 6 7 8 0.047 μF V 3 VSC IS + A IOS 3 3 VS 0.047 μF V VOS ΔVIN VOS VS 0.047 μF ●Timing Chart Input voltage between IN and VR ΔVIN(IN-VR) VT VSCON OD/SC terminal voltage VOD/VSC OS terminal voltage VOS 0.8V tON www.rohm.co.jp © 2012 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 4/11 TSZ02201-0RCR1GZ00070-1-2 2012.10.29 Rev.002 Datasheet BD9582F-M ●Typical Performance Curves(reference data) 1.0 800 0.9 700 105℃ 0.8 S u p p ly C u rre n t IS [u A ] P ow e r D issipa tion [W ] 600 0.7 0.6 0.5 0.4 0.3 500 －60℃ 25℃ 400 300 200 0.2 100 0.1 0.0 0 105 0 25 50 75 100 125 0 150 5 10 15 20 Power Supply VS [V] Ambient Temperature Ta [℃] Figure 1 Derating curve 30 Figure 2 Circuit current - Supply voltage 40 0 O S term inal S ource C urrent I O S S O [uA ] 30 R a te of fluctua tion Δ [% ] 25 20 RIN=300 10 0 -10 RIN=1kΩ -20 -30 -40 -100 105℃ -200 25℃ -300 －60℃ -400 -500 -60 -40 -20 0 20 40 60 80 100 120 0 5 10 15 20 Ambient Temperature Ta [℃] Power Supply VS [V] Figure 3 Trip voltage fluctuation rate - Ambient temperature Figure 4 OS terminal source current - Supply voltage www.rohm.co.jp © 2012 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 5/11 25 TSZ02201-0RCR1GZ00070-1-2 2012.10.29 Rev.002 Datasheet 5 10 4 8 O S te rm in a l v o lta g e V O S [V ] O p e ra tin g tim e t O N [m s ] BD9582F-M 3 2 1 6 4 －60℃ 2 105℃ 0 0 -60 -40 -20 0 20 40 60 80 100 0 120 1 2 Ambient Temperature Ta [℃] Figure 5 Operating time - Ambient temperature 10 10 8 8 6 105℃ 25℃ 3 4 5 6 Power Supply VS [V] 7 8 9 10 Figure 6 Latch OFF supply voltage - Ambient temperature O S te rm in a l v o lta g e V O S [V ] O S te rm in a l vo lta g e V O S [V ] 25℃ －60℃ 4 2 6 4 －60℃ 25℃ 2 105℃ 0 0 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 SC terminal input voltage VSCON [V] Figure 7 SC ON voltage - Ambient temperature www.rohm.co.jp © 2012 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 1 2 3 4 5 6 Power Supply VS [V] 7 8 9 10 Figure 8 Latch ON supply voltage - Ambient temperature 6/11 TSZ02201-0RCR1GZ00070-1-2 2012.10.29 Rev.002 Datasheet BD9582F-M ●Power Dissipation Power dissipation(total loss) indicates the power that can be consumed by IC at Ta=25℃(normal temperature).IC is heated when it consumed power, and the temperature of IC chip becomes higher than ambient temperature. The temperature that can be accepted by IC chip depends on circuit configuration, manufacturing process, and consumable power is limited. Power dissipation is determined by the temperature allowed in IC chip (maximum junction temperature) and thermal resistance of package (heat dissipation capability). The maximum junction temperature is typically equal to the maximum value in the storage temperature range. Heat generated by consumed power of IC radiates from the mold resin or lead frame of the package. The parameter which indicates this heat dissipation capability(hardness of heat release)is called thermal resistance, represented by the symbol θja℃/W.The temperature of IC inside the package can be estimated by this thermal resistance. Fig.9(a) shows the model of thermal resistance of the package. Thermal resistance θja, ambient temperature Ta, junction temperature Tj, and power dissipation Pd can be calculated by the equation below θja = (Tj - Ta) / Pd ℃/W ・・・・・ (Ⅰ) Derating curve in Fig.9(b) indicates power that can be consumed by IC with reference to ambient temperature. Power that can be consumed by IC begins to attenuate at certain ambient temperature. This gradient is determined by thermal resistance θja. Thermal resistance θja depends on chip size, power consumption, package, ambient temperature, package condition, wind velocity, etc even when the same of package is used. Thermal reduction curve indicates a reference value measured at a specified condition. Fig.10(a) show a derating curve for an example of BD9582F-M. LSIの 消 費 力 [W] Power dissipation of 電 LSI Pd (max) θja=(Tj-Ta)/P ℃/W θja2 < θja1 P2 周囲温度 Ta [℃] Ambient temperature θ' ja2 P1 θ ja2 Tj ' (max) Tj (max) θ' ja1 Chip surfaceチップ temperature 表面温度 Tj [℃] 0 25 50 θ ja1 75 100 Ambient temperature 周 囲 温 度 Ta [℃ ] 消費電力Pd[W] P [W] Power dissipation 125 150 (b) Derating curve (a) Thermal resistance Figure 9. Thermal resistance and derating 1.0 0.9 P o w e r D issip a tio n [W ] 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 105 0 25 50 75 100 125 150 Ambient Temperature Ta [℃] (a) BD9582F-M BD9582F-M Derating curve slope UNIT 5.5 mW/℃ When using the unit above Ta=25℃, subtract the value above per degree℃ Permissible dissipation is a value when FR4 glass epoxy board 70mm×70mm×1.6mm (cooper foil area below 3%) is mounted. Figure 10. Derating curve www.rohm.co.jp © 2012 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 7/11 TSZ02201-0RCR1GZ00070-1-2 2012.10.29 Rev.002 Datasheet BD9582F-M ●I/O equivalence circuit VCC VCC VS 300O Pin 1 [VR] Pin 5 [SC] 100kO ESD PRO TECT Pin 2 VCC VCC VS Pin 1 Pin 2 [IN] VCC 300O Pin 6 [NR] 100kO Pin 7 VCC VCC Pin 6 Pin 3 [GND] Pin 7 [OS] VCC VCC VCC line (Internal Power Supply Line) Pin 4 [OD] www.rohm.co.jp © 2012 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 Pin 8 [VS] 8/11 TSZ02201-0RCR1GZ00070-1-2 2012.10.29 Rev.002 Datasheet BD9582F-M ●Operational Notes 1) Absolute maximum ratings Absolute maximum ratings are the values which indicate the limits, within which the given voltage range can be safely charged to the terminal. However, it does not guarantee the circuit operation. 2) Power dissipation Pd Using the unit in excess of the rated power dissipation may cause deterioration in electrical characteristics due to a rise in chip temperature, including reduced current capability. Therefore, please take into consideration the power dissipation (Pd) under actual operating conditions and apply a sufficient margin in thermal design. Refer to the thermal derating curves for more information. 3) Terminal short-circuits When the output and power supply terminals are shorted, excessive output current may flow, resulting in undue heat generation and, subsequently, destruction. 4) Ground terminal voltage All time, Ground terminal voltage should keep lowest voltage. In addition, please confirm whether there is not really a terminal becoming the voltage that is lower than GND including a transitional phenomenon. 5) Operation in a strong electromagnetic field Operation in a strong electromagnetic field may cause malfunctions. 6) Short-circuit between pins and erroneous mounting Incorrect mounting may damage the IC. In addition, the presence of foreign particles between the outputs, the output and the power supply, or the output and GND may result in IC destruction. 7) IC handing Applying mechanical stress to the IC by deflecting or bending the board may cause fluctuations in the electrical characteristics due to piezo resistance effects. 8) Board inspection Connecting a capacitor to a pin with low impedance may stress the IC. Therefore, discharging the capacitor after every process is recommended. In addition, when attaching and detaching the jig during the inspection phase, ensure that the power is turned off before inspection and removal. Furthermore, please take measures against ESD in the assembly process as well as during transportation and storage. Status of this document The Japanese version of this document is formal specification. A customer may use this translation version only for a reference to help reading the formal version. If there are any differences in translation version of this document formal version takes priority. www.rohm.co.jp © 2012 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 9/11 TSZ02201-0RCR1GZ00070-1-2 2012.10.29 Rev.002 Datasheet BD9582F-M ●Ordering Information B D 9 5 8 2 F Part Number - ME2 Packaging and forming specification E2: Embossed tape and reel (SOP8) Package F: SOP8 ●Physical Dimension Tape and Reel Information SOP8 6 5 +6° 4° −4° 0.3MIN 7 4.4±0.2 6.2±0.3 8 1 2 3 0.9±0.15 5.0±0.2 (MAX 5.35 include BURR) Tape Embossed carrier tape Quantity 2500pcs Direction of feed E2 The direction is the 1pin of product is at the upper left when you hold ( reel on the left hand and you pull out the tape on the right hand ) 4 0.595 1.5±0.1 +0.1 0.17 -0.05 S S 0.11 0.1 1.27 1pin 0.42±0.1 Reel (Unit : mm) Direction of feed ∗ Order quantity needs to be multiple of the minimum quantity. ●Marking Diagrams SOP8 (TOP VIEW) 9 5 8 2 M LOT Number １PIN MARK www.rohm.co.jp © 2012 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 10/11 TSZ02201-0RCR1GZ00070-1-2 2012.10.29 Rev.002 Datasheet BD9582F-M ●Revision History Date Revision 2012.10.29 001 Changes New Release www.rohm.co.jp © 2012 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 11/11 TSZ02201-0RCR1GZ00070-1-2 2012.10.29 Rev.002 Datasheet Notice Precaution on using ROHM Products 1. If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), aircraft/spacecraft, nuclear power controllers, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific Applications. (Note1) Medical Equipment Classification of the Specific Applications JAPAN USA EU CHINA CLASSⅢ CLASSⅡb CLASSⅢ CLASSⅢ CLASSⅣ CLASSⅢ 2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which a failure or malfunction of our Products may cause. The following are examples of safety measures: [a] Installation of protection circuits or other protective devices to improve system safety [b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure 3. Our Products are not designed under any special or extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our Products under any special or extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents [b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust [c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves [e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items [f] Sealing or coating our Products with resin or other coating materials [g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning residue after soldering [h] Use of the Products in places subject to dew condensation 4. The Products are not subject to radiation-proof design. 5. Please verify and confirm characteristics of the final or mounted products in using the Products. 6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied, confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 7. De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual ambient temperature. 8. Confirm that operation temperature is within the specified range described in the product specification. 9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in this document. Precaution for Mounting / Circuit board design 1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product performance and reliability. 2. In principle, the reflow soldering method must be used; if flow soldering method is preferred, please consult with the ROHM representative in advance. For details, please refer to ROHM Mounting specification Notice - SS © 2014 ROHM Co., Ltd. All rights reserved. Rev.002 Datasheet Precautions Regarding Application Examples and External Circuits 1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the characteristics of the Products and external components, including transient characteristics, as well as static characteristics. 2. You agree that application notes, reference designs, and associated data and information contained in this document are presented only as guidance for Products use. Therefore, in case you use such information, you are solely responsible for it and you must exercise your own independent verification and judgment in the use of such information contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of such information. Precaution for Electrostatic This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control). Precaution for Storage / Transportation 1. Product performance and soldered connections may deteriorate if the Products are stored in the places where: [a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [b] the temperature or humidity exceeds those recommended by ROHM [c] the Products are exposed to direct sunshine or condensation [d] the Products are exposed to high Electrostatic 2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is exceeding the recommended storage time period. 3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads may occur due to excessive stress applied when dropping of a carton. 4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of which storage time is exceeding the recommended storage time period. Precaution for Product Label QR code printed on ROHM Products label is for ROHM’s internal use only. Precaution for Disposition When disposing Products please dispose them properly using an authorized industry waste company. Precaution for Foreign Exchange and Foreign Trade act Since our Products might fall under controlled goods prescribed by the applicable foreign exchange and foreign trade act, please consult with ROHM representative in case of export. Precaution Regarding Intellectual Property Rights 1. All information and data including but not limited to application example contained in this document is for reference only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. ROHM shall not be in any way responsible or liable for infringement of any intellectual property rights or other damages arising from use of such information or data.: 2. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any third parties with respect to the information contained in this document. Other Precaution 1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM. 2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of ROHM. 3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the Products or this document for any military purposes, including but not limited to, the development of mass-destruction weapons. 4. The proper names of companies or products described in this document are trademarks or registered trademarks of ROHM, its affiliated companies or third parties. Notice - SS © 2014 ROHM Co., Ltd. All rights reserved. Rev.002 Datasheet General Precaution 1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents. ROHM shall n ot be in an y way responsible or liabl e for fa ilure, malfunction or acci dent arising from the use of a ny ROHM’s Products against warning, caution or note contained in this document. 2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s representative. 3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccur acy or errors of or concerning such information. Notice – WE © 2014 ROHM Co., Ltd. All rights reserved. Rev.001