BM6205FS-E2

Package Information : SSOP-A54_36 　　　 　　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 1.　Package Information 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 Package Name Type Pin Count Outline Dimension Drowing No. Package Weight [g] Lead Finish MSL Level 　 　 SSOP-A54_36 SOP 　 　 　 36 　　　 R ec N o ew m m D e es n d ig ed ns fo r 　 　 　 　 　　　 　　　 1.44 　 　 　 Pure Tin 　 　 　 Level 3 　 　 　 　 　 　 　 　 　 　 　 　 　　　　　　 　 　 　 　 　 　 　 　 　 　 　 　　　　　　　 　 　 　 　 　 　 　 　 EX643-5001 　 　 　 　 　 　　 　　 　 　 　 　 　 　 　 　 　　　　　　　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　　　　　　 2.　Package Structure 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　 　 　 　 　　 　 　 　 　 N 　 　 ot 　 　 　 　 　 　 　 　　　　　　　 　 　 　 　 　　　　　　　 　　　　　　　 　 　 　 　 　 　　　　　　　 　 　 　 　 　 　 　　　　　　　 　 　 　 　 　　　　　　　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　　　　　　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　　　　　　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　　　　　　 　　　　　　　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　　　　　　 www.rohm.com 　 ©2016 ROHM Co., Ltd. All rights reserved 　 　 　 1/8 TSZ02201-SSOP-A54_36-1-2 2016/09/21 - Rev. 001 　　　　 SSOP-A54_36 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 Package Information 3.　Packing Specification 3.1 Packing form, Quantity, PIN1 Orientation [pcs] Tape&Reel 1000 E2 R ec N o ew m m D e es n d ig ed ns fo r Packing Form Packing Quantity PIN 1 Orientation 3.2 Use material 　 Item Embossed carrier tape Cover tape Reel Desiccant Envelope Air cap Unit box 　 Shipping box Material PS PET+PE PS Silicagel Aluminum-laminated PE Cardboard Cardboard 3.3 Leader specification No component pockets are800 mm or more. ot 3.4 Trailer specification No component pockets are200 mm or more. Tape is free from reel. N 3.5 Peelback strength Cover tape peelback strength is 0.2 N to 0.7 N. Fig. 2 Test method 3.6 Missing Ics 　 　　 　 (1) No consecutive dropouts. (2) A maximun 0.1 % of specified number of products in each packing may be missing. www.rohm.com ©2016 ROHM Co., Ltd. All rights reserved 2/8 　　　　 TSZ02201-SSOP-A54_36-1-2 2016/09/21 - Rev. 001 SSOP-A54_36 　　　　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 Package Information N ot R ec N o ew m m D e es n d ig ed ns fo r 3.7 Tape and Reel Specification 3.7.1 Tape Dimension 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　　　　　　 www.rohm.com 　 ©2016 ROHM Co., Ltd. All rights reserved 　 　 3/8 TSZ02201-SSOP-A54_36-1-2 2016/09/21 - Rev. 001 　　　　 SSOP-A54_36 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 Package Information R ec N o ew m m D e es n d ig ed ns fo r 3.7.2 Reel Dimension 　 　 　 　 　 　 Reel Dimension 　 　 　 　 　 330 　　　　　 80 13 21 2 33.5 37.5 　　　　　 N ot A 　 B C D E W1 　 W2 　 (unit:mm) Reel Tolerance 　 　 　 +/-2.0 　　　 +/-1.0 +/-0.2 +/-0.8 +/-0.5 +/-1.0 +/-1.0 　　　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　　　　　　 www.rohm.com 　 ©2016 ROHM Co., Ltd. All rights reserved 　 　 4/8 TSZ02201-SSOP-A54_36-1-2 2016/09/21 - Rev. 001 SSOP-A54_36 　　　　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 Package Information 3.8 Packing Method R ec N o ew m m D e es n d ig ed ns fo r 1 reel(s) or less per unit box 3.9 Packing Style 5 unit boxes or less per shipping box (unit:mm) Shipping Box Dimension X Y 　Z 372 368 　 　 355 N ot 3.10 Label Specification 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　　　　　　 www.rohm.com 　 ©2016 ROHM Co., Ltd. All rights reserved 　 　 5/8 TSZ02201-SSOP-A54_36-1-2 2016/09/21 - Rev. 001 SSOP-A54_36 　　　　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 Package Information N ot R ec N o ew m m D e es n d ig ed ns fo r 4.　Footprint dimensions (unit:mm) In actual design, please optimize in accordance with the situation of your board design and soldering condition. 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　　　　　　 www.rohm.com 　 ©2016 ROHM Co., Ltd. All rights reserved 　 　 6/8 TSZ02201-SSOP-A54_36-1-2 2016/09/21 - Rev. 001 　　　　 SSOP-A54_36 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 Package Information R ec N o ew m m D e es n d ig ed ns fo r 5.　Marking Specification 6.　Storage conditions 6.1 Storage environment Recommended storage conditions 　 　 　 　 　 　 　 　 　 Min. 　 　 Temperature 5 　 Humidity 40 　 Max. 30 70 　　 Max. 1 　　 Unit °C 　 　 % RH 6.2 Storage period 　 　 　 　 　 　 　 　 　 　 Storage period Min. - 　 　 　 　 Unit year 6.3 Specified storage period until soldering Min. 　 Max. 　 　 Unit Acceptable time 　 168 　 　 hour The above value is a time from opening the moisture-proof packaging until the soldering. 　 　 　 　 　 　 　 　 　 　 Cases where it is necessary to perform the drying process is the following. Case 1 : in excess of the above-mentioned "Acceptable time" Case 2 : it has passed more than a year not open N ot Recommended the dry process conditions 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 Temperature [°C] 　 　 Time [hour] 　 60 　 48 Reel(Note1) Other Heat-proof container 　 125 　　　 24 　 (Note1) When carrying out the dry process in a "Reel" state, the peelback strength will change. Please refer to the following values: 　 　 　 　 　 　 　 　 　 　 　 　 Min. Max. 　 　 　 Unit 　 Peelback strength 0.2 0.9 　 　 　 N The drying process is the impact on the solderability because the oxidation of the terminal portion will occur. Therefore, specify the maximum times of the dry processing as follows: Recommended execution count of the dry process 　 　 　 　 　 　 　 　 　 Min. 　　 Max. 　 Unit 　 Execution count 　　 2 　 times 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　　　　　　 www.rohm.com 　 ©2016 ROHM Co., Ltd. All rights reserved 　 　 7/8 TSZ02201-SSOP-A54_36-1-2 2016/09/21 - Rev. 001 　　　　 SSOP-A54_36 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 Package Information 7.　Soldering conditions R ec N o ew m m D e es n d ig ed ns fo r 7.1 Recommended temperature profile for reflow 7.2 Recommended condition for wave soldering Preheating temperature Preheating time Soldering temperature Soldering time : : : : 120 60 260 12 °C to 150 °C sec MAX °C ± 3 °C sec MAX Notes for wave soldering (1)Soldering time is provided for total soldering time in case of dual wave soldering. (2) Do not use other soldering methods with wave soldering. (3) Recommend to clean the board to eliminate flux, solder waste, and other impurities for reliability, after soldering. (4) Optimize soldering condition to prevent solder bridging. ot 7.3 Recommended condition for solder iron : : 380 °C or less 4 sec or less N Solder iron temperature Mounting time 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　　　　　　　　　　　　　　　 www.rohm.com ©2016 ROHM Co., Ltd. All rights reserved 8/8 TSZ02201-SSOP-A54_36-1-2 2016/09/21 - Rev. 001 Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : R ec N o ew m m D e es n d ig ed ns fo r 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. ot 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. N 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 201 ROHM Co., Ltd. All rights reserved. R1102A