BP3591

PRODUCTS HYBRID IC TYPE BP3591 PAGE 2/15 ●Precautions for Reference Circuits 1) If change is made to the constant of an external circuit, allow a sufficient margin due to variations of the characteristics of the products and external components, including transient characteristics, as well as static characteristics. 2) The reference circuit examples, their constants, and other types of information contained herein are applicable only when the products are used in accordance with standard methods. Therefore, if mass production is intended, sufficient consideration to external conditions must be made. ● Precaution for Electrostatic This product is Electrostatic sensitive product, which may be damaged due to Electrostatic discharge. Please take proper caution during manufacturing and storing so that voltage exceeding Product maximum rating won't be applied to products. Please take special care under dry condition (Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control etc.) ● Precaution for Storage / Transportation 1) Product performance and connector mating may deteriorate if the products are stored in the following places: [a] Where the products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [b] Where the temperature or humidity exceeds those recommended by the Company Temperature: 5℃ - 30℃, Humidity 40% - 60% [c] Storage in direct sunshine or condensation. [d] Storage in high Electrostatic. 2) Even under ROHM recommended storage condition, connector mating of products over 1 year old may be degraded. 3) Store / transport cartons in the correct direction, which is indicated on a carton as a symbol, otherwise bent leads may occur due to excessive stress applied when dropping of a carton.. ● Precaution for Product Label QR code printed on ROHM product label is only for internal use, and please do not use at customer site. might contain a internal part number that is inconsistent with an product part number. It ● Precaution for Disposition When disposing products please dispose them properly with a industry waste company. ●Precaution for Foreign Exchange and Foreign Trade Act Note: Since concerned goods are fallen under controlled goods prescribed by Foreign exchange and Foreign trade act, the permission based on the act is necessary in case of export. Please follow the necessary procedures based on relevant laws and regulations when end goods, which were manufactured by your company with the concerned goods, are brought to foreign countries or nonresident. REV.A TSZ22111･05 SPECIFICATION No.：Target Specification PRODUCTS HYBRID IC ！ TYPE BP3591 PAGE 3/15 ● Prohibitions Regarding Industrial Property 1) These Specifications contain information related to the ROHM industrial property. Any use of them other than pertaining to the usage of appropriate products is not permitted. Duplication of these Specifications and its disclosure to a third party without the Company’s permission is prohibited. 2) Information and data on products, including application examples, contained in these specifications are simply for reference; the Company does not guarantee any industrial property rights, intellectual property rights, or any other rights of a third party regarding this information or data. Accordingly, the Company does not bear any responsibility for: [a] infringement of the intellectual property rights of a third party [b] any problems incurred by the use of the products listed herein. 3) The Company prohibits the purchaser of its products to exercise or use the intellectual property rights, industrial property rights, or any other rights that either belong to or are controlled by the Company, other than the right to use, sell, or dispose of the products. ● Other Matters 1) Please sign these Specifications and return one copy to the Company. If a copy is not returned within three months after the issued date specified on the front page of these Specifications, the Company will consider the Specifications accepted. 2) If any matter related to these Specifications needs to be clarified, discussions shall be held promptly between the two parties concerned to determine the issue. REV.A TSZ22111･05 SPECIFICATION No.：Target Specification PRODUCTS HYBRID IC 1. STRUCTURE P.C.BOARD ASSEMBLY 2. PRODUCTS HYBRID INTEGRATED CIRCUIT 3. TYPE BP3591 4. APPLICATION COMMUNICATION APPLIANCE 5. FUNCTION WIRELESS LAN COMMUNICATION 6. ABSOLUTE MAXIMUM RATINGS NO PARAMETER 1 Supply Voltage 2 Operating temperature range 3 Storage temperature range TYPE PAGE 4/15 BP3591 SYMBOL VDD Topr Tstg LIMITS -0.3 ∼ +3.6 -40 ∼ 85 -40 ∼ 85 UNIT V ℃ ℃ REMARKS DC Note) These are the valves that must not be exceeded at any time under any application or any test conditions. Please make design keeping enough margins accordingly. 7. RECOMMENDED OPERATING CONDITIONS NO 1 2 PARAMETER SYMBOL Supply Voltage Using temperature range REV.A TSZ22111･05 VCC Ta MIN. 3.1 -40 SPEC TYP. 3.3 25 MAX. 3.5 85 UNIT REMARKS V ℃ SPECIFICATION No.：Target Specification PRODUCTS HYBRID IC 8. TYPE PAGE 5/15 BP3591 PRINCIPAL PERFORMANCE NO. PARAMETER 1 2 Frequency Width Frequency Deviation 3 Sender Output Voltage* 4 Corresponding Rate 5 Receiving Sensitivity* 6 7 8 Security Function Host Interface SUPPLY VOLTAGE CHARACTERISTICS 2,400MHz ∼ 2,497MHz（ch1∼ch13,ch14） WITHIN ±25ppm IEEE802.11b： 15dBm±2dB IEEE802.11g： 13dBm±2dB IEEE802.11n： 12dBm±2dB IEEE802.11b： 1 ∼ 11Mbps IEEE802.11g： 6 ∼ 54Mbps IEEE802.11n： 6.5 ∼ 72.2Mbps IEEE802.11b： -94dBm @1Mbps, -87dBm @11Mbps IEEE802.11g： -92dBm @6Mbps, -71dBm @54Mbps IEEE802.11n： -90dBm @6.5Mbps, -68dBm @72.2Mbps 64bit/128bit WEP, TKIP, AES USB2.0, SDIO (INCLUDING SPI MODE), UART SINGLE 3.3V *sending output power and receiving sensitivity is performance that is in the end of coaxial connector. 9. BLOCK DIAGRAM BP3591 BP3580 40MHz OSC Chip Antenna RF-SW Connector RF IC 2.8V LDO 1.2V LDO RF I/F BaseBand & MAC 3.3V HOST I/F FLASH I/F HOST CPU FLASH MEMORY Electricity supplying point EEPROM for antenna Fig 1. Block diagram ・ A Flash memory (option) is necessary for use the flash boot function. ・ There is a switch type coaxial connector (MS-156C made by Hirose electric Co., Ltd.) between BP3580 and chip antenna. Please connect an external antenna to this connector if it is necessary. (The chip antenna cannot use when an external antenna is used.) REV.A TSZ22111･05 SPECIFICATION No.：Target Specification PRODUCTS HYBRID IC 10. TYPE PAGE 6/15 BP3591 ELECTRICAL CHARACTERISTICS CONDITIONS：Ta=25℃, VCC=3.3V, GND=0.0V PARAMETER CONDITION UNIT REMARKS 2484 mA mA mA mA uA MHz Continuous Continuous (With USB) - 25 ppm 13 15 17 dBm 11g：54Mbps 11 13 15 dBm 11n：MCS7 10 12 14 dBm - - - 2.5 uW/MHz - - -30 -50 -20 -28 -40 dBr dBr dBr dBr dBr - -87 -74 dBm -71 -65 dBm MIN. TYP. MAX. Sleep - 2412 300 340 200 240 300 - - -25 11b：11Mbps Send Consumption Current Center Frequency Frequency Deviation Sending Power Unnecessary Radius Out of Width Receive DSSS 11Mbps Spectrum Mask OFDM 54Mbps 11b：11Mbps Receiving Sensitivity Unnecessary Radius Out of Receiving 11g：54Mbps 11n：MCS7 - -68 -64 dBm Fr