0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
BP5047A24

BP5047A24

  • 厂商:

    ROHM(罗姆)

  • 封装:

    -

  • 描述:

    IC AC/DC CONV 24V 150MA SIP12

  • 数据手册
  • 价格&库存
BP5047A24 数据手册
Data Sheet 220VAC Input/24VDC (150mA) Output Non-Isolated AC/DC Converter BP5047A24 Absolute Maximum Ratings Parameter Input voltage Maximum output voltage ESD endurance Operating temperature range Storage temperature range Symbol Vi IoMAX Vsurge Topr Tstg Limits 358 150 2 −20 to +80 −25 to +105 Unit V mApk kV °C °C 19.1MAX. Dimensions (Unit : mm) 34.5MAX. Mark Side 1 3 5 7 7.62 1.3±0.2 2.54�11=27.94 10 12 0.25±0.05 4.65MAX. 4.55MAX. 0.5±0.1 3.25MAX. 5.08 9.2MAX. Electrical Characteristics Parameter Symbol Min. Input voltage range 249 Vi Output voltage 23.0 Vo Output current 0 Io Line regulation −0.20 Vr Load regulation −0.20 Vl Output ripple voltage − Vp Power conversion effciency 65 η Typ. 311 24.0 − 0.05 0.05 0.07 78 Max. 358 25.8 150 0.20 0.20 0.15 − Unit V V mA V V Vp-p % Conditions Vi=311V, Io=100mA Vi=311V ∗1 Vi=249 to 358V, Io=100mA Vi=311V, Io=0 to 100mA ∗2 Vi=311V, Io=100mA Vi=311V, Io=150mA ∗2 Derating Curve Output Current Io (mA) 250 200 150 100 50 Operation Range Derating Curve ∗1 Maximum output current varies depending on ambient temperature ; please refer to derating curve. ∗2 Please refer to Load regulation, Conversion effciency. Conversion Efficiency Conversion Efficiency η (%) 100 90 80 70 60 50 40 30 20 10 0 0 Conversion Efficiency (Ta=25°C, Vi=311V) Application Circuit BP5047A24 Be sure to use fuse for safety. Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 Function Output terminal Vo(24V) Skip Choke coil connect Skip Choke coil connect Skip COMMON Skip Skip N.C. Skip Input terminal Vi(311VDC) 12 10 DC motor Ii Vi D1 R1 FUSE 7531 4±1.0 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient Temperature Ta (°C) 20 40 60 80 100 120 140 160 Output Current Io (mA) Io C3 L1 + + ZNR − Load Regulation 30 Output Voltage Vo (V) 25 20 15 10 5 0 0 50 100 150 Output Current Io (mA) 200 Load Regulation (Ta=25°C, Vi=311V) C1 − C2 Vo Please verify operation and characteristics in the customer's circuit before actual usage. Ensure that the load current does not exceed the maximum rating. External Component Specifications FUSE: Fuse C1: Input capacitor C2: Output capacitor Use a fuse of 1A. Rated voltage 400V or higher 22 to 820µF Permissible ripple current is 0.13Arms or higher Rated voltage 35V or higher, 100 to 470µF Low impedance type Impedance is 0.4Ω max at high frequencies. Evaluate under actual operating conditions. Rated voltage 400V or higher 0.1 to 0.22µF Film or ceramic capacitor Evaluate under actual operating conditions. Ripple current 0.25Arms or greater. Capacitor impedance affects the output ripple voltage. Inductance : 1.5mH Permissible current value 300mA or higher A reverse surge voltage 800V or higher An average rectifying current 0.5A or higher The forward surge current should be 20A or higher. 10 to 22Ω 1/4W Determine the ideal value through actual testing. A varistor is required to protect against lightning surges and static electricity. Surface Temperature Increase Temperature Rising ∆T (°C) 30 25 20 15 10 5 0 0 Surface Temperature Increase (Ta=25°C, Vi=311V) C3: Noise removal capacitor L1: Power inductor D1: Rectifier diode 50 100 Output Current Io (mA) 150 R1: Noise removal resistor ZNR: Varistor www.rohm.com ©2010 ROHM Co., Ltd. All rights reserved. 1/1 2010.01 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. R1010A
BP5047A24 价格&库存

很抱歉,暂时无法提供与“BP5047A24”相匹配的价格&库存,您可以联系我们找货

免费人工找货
BP5047A24
    •  国内价格 香港价格
    • 1+41.139731+4.99996
    • 10+33.7536110+4.10228
    • 50+30.0847450+3.65638
    • 100+25.52889100+3.10268
    • 500+25.49664500+3.09876
    • 1000+25.432131000+3.09092

    库存:0