BP5067-15_10

Data Sheet 100VAC Input/15VDC (300mA) Output Non-Isolated AC/DC Converter BP5067-15 Absolute Maximum Ratings Parameter Input voltage Maximum Output current ESD endurance Maximum surface temperature Operating temperature range Storage temperature range Symbol Vi IoMAX Vsurge Tcmax Topr Tstg Limits 190 300 2 105 −20 to +80 −25 to +105 Unit V mApk kV °C °C °C 22.0MAX. Dimensions (Unit : mm) 35.0MAX. Mark Side 1 3 5 7 7.62 1 . 3 ±0 . 2 2.54�11=27.94 10 12 0 . 2 5 ±0 . 0 5 4.85MAX. 4.35MAX. 0 . 5 ±0 . 1 3.6MAX 5.08 9.2MAX. Electrical Characteristics Symbol Min. Parameter Input voltage range 113 Vi Output voltage 14.2 Vo Output current 0 Io Line regulation −0.20 Vr Load regulation −0.20 Vl Output ripple voltage − Vp Power conversion efficiency 70 η Typ. 141 15.0 − 0.05 0.05 0.07 83 Max. 186 15.8 300 0.20 0.20 0.15 − Unit V V mA V V Vp-p % Conditions DC(80 to 120VAC) Vi=141V, Io=100mA Vi=141V Vi=113 to 186V, Io=100mA Vi=141V, Io=0 to 100mA Vi=141V, Io=100mA Vi=141V, Io=300mA Derating Curve 350 Output Current Io(mA) 300 250 200 150 100 50 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient Temperature Ta(°C) Operation Range Derating Curve Application Circuit BP5067-15 Be sure to use fuse for safety. Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 Function Output terminal Vo(15V) Skip Choke coil connect Skip Choke coil connect Skip COMMON Skip Skip N.C. Skip Input terminal Vi(141VDC) Conversion Efficiency 100 90 80 70 60 50 40 30 20 10 0 0 Conversion Efficiency η(%) Conversion Efficiency (Ta=25°C, Vi=141V) 12 10 DC motor Ii Vi D1 ZNR 220V − + 7531 R1 C1 FUSE Io C3 L1 + 1mH − 4±1.0 50 100 150 200 250 Output Current Io(mA) 300 C2 Vo Load Regulation 20 18 16 14 12 10 8 6 4 2 0 Load Regulation (Ta=25°C, Vi=141V) Output Voltage Vo(V) Please verify operation and characteristics in the customer's circuit before actual usage. Ensure that the load current does not exceed the maximum rating. External Component Specifications FUSE: Fuse C1: Input capacitor C2: Output capacitor Use a quick-acting fuse of (1A) Above 200V, 22 to 820µF Ripple current 0.13Arms or above above 25V, 100 to 470µF, low impedance ESR : 0.4Ω Max. Ripple current 0.25Arms or above Capacitor impedance affects the output ripple voltage. Above 200V, 0.1 to 0.22µF Use a film or ceramic capacitor Evaluate in actual circuit Inductance : 1mH, Rating current : above 600mA Select components that do not easily get magnetically saturated at high temperature. Use a rectifying diode with the peak reverse voltage of 400V or higher, an average rectification current of 0.5A or larger and a peak surge current of 20A or larger. When using a large capacitance input capacitor, choose a component that is strong against inrush current at power up. Full-wave rectification can be used. 10 to 22Ω, 1/4W Determine the ideal value through actual testing. A varistor must be used to protect against lightning surges and static electricity. 0 50 100 150 200 250 300 350 400 Output Current Io(mA) Surface Temperature Increase 40 35 30 25 20 15 10 5 0 Temperature Rising ∆T(°C) Surface Temperature Increase (Ta=25°C, Vi=141V) C3: Noise reduction capacitor L1: Power inductor D1: Rectifier diode 0 50 100 150 200 250 300 350 Output Current Io(mA) R1: Noise reduction resistor ZNR: Varistor www.rohm.com ©2010 ROHM Co., Ltd. All rights reserved. 1/1 2010.01 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. R1010A