BP5081B15

AC100V input, output-1 : 15V/80mA, output-2 : 5V/350mA AC/DC converter BP5081B15 Absolute Maximum Ratings Parameter Input voltage Maximum Output current(15V) Maximum Output current(5V) ESD endurance Maximum surface temperature Operating temperature range Storage temperature range Symbol Vi I15MAX I5MAX Vsurge Tcmax Topr Tstg Limits 200 80 350 2 105 −25 to +80 −25 to +105 Unit V mApk mApk kV °C °C °C Dimensions(Unit : mm) 40.5MAX. 11.0MAX. 4.0±1.0 21.5MAX. 1 4 6 8 10 11 13 14 0.25±0.05 0.5±0.1 3.25MAX 1.3±0.2 2.54±0.2 Mark Side 5.55MAX. 5.45MAX. 2.54×13=33.02 Electrical Characteristics Symbol Parameter Vi Input voltage V15 Output voltage1 I15 Output current1 V5 Output voltage2 I5 Output current2 Vr1 Line regulation1 Vr2 Line regulation2 Vl1 Load regulation1 Vl2 Load regulation2 Output ripple voltage1 Vp1 Output ripple voltage2 Vp2 Power conversion efficiency1 η1 Power conversion efficiency2 η2 Min. 113 14.0 0 4.7 0 −0.2 −0.2 −0.2 −0.2 − − 65 60 Typ. 141 15.0 − 5.0 − 0.1 0.1 0.05 0.05 0.05 0.05 72 65 Max. 190 16.0 80 5.3 350 0.2 0.2 0.2 0.2 0.2 0.2 − − Unit V V mA V mA V V V V Vp-p Vp-p % % Conditions DC Vi=141V, I15=80mA ∗1 Vi=141V Vi=141V, I5=350mA ∗1 Vi=141V Vi=113 to 190V, I15=80mA Vi=113 to 190V, I5=350mA Vi=141V, I15=0 to 80mA ∗2 Vi=141V, I5=0 to 350mA ∗2 Vi=141V, I15=80mA, I5=0mA Vi=141V, I15=0mA, I5=350mA Vi=141V, I15=80mA, I5=0mA ∗2 Vi=141V, I15=0mA, I5=350mA ∗2 Derating Curve 100 90 80 70 60 50 Operation Range 40 30 20 10 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Derating Curve (15V output) Output Current Io(mA) Output Current Io(mA) 400 350 300 250 200 150 100 50 Derating Curve (5V output) Operation Range 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient Temperature Ta(°C) Ambient Temperature Ta(°C) Conversion Efficiency Conversion Efficiency (15V output) Conversion Efficiency (5V output) Conversion Efficiency η1(%) ∗1 Maximum output current varies depending on ambient temperature ; please refer to derating curve. ∗2 Please refer to Load regulation, Conversion efficiency. Application circuit BP5081B15 Be sure to use fuse for safety. Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Function Input terminal Vi(141VDC) Not used Not used COMMON Not used Choke coil connect Not used Choke coil connect Not used 15V output terminal 15V input terminal Not used COMMON Output terminal Vo(5V) 100 90 80 70 60 50 40 30 20 10 0 0 Conversion Efficiency η2(%) (I5=0mA, Vi=141V) 20 40 60 80 100 90 80 70 60 50 40 30 20 10 0 0 (I15=0mA, Vi=141V) 50 100 150 200 250 300 350 Output Current I15(mA) Output Current I5(mA) Load Regulation Load Regulation (15V output) 16.0 15.8 15.6 15.4 15.2 15.0 14.8 14.6 14.4 14.2 14.0 (I5=0mA, Vi=141V) 1 DC motor R2 D1 R1 FUSE 4 6 8 1011 1314 Load Regulation (5V output) 5.3 (I15=0mA, Vi=141V) Output Voltage V15(V) Output Voltage V5(V) 0 20 40 60 80 Ii Vi Io L1 C2 C3 5.2 5.1 5.0 4.9 4.8 4.7 0 50 100 150 200 250 300 350 + ZNR − C1 + − + − C4 Vo For actual usage, Please kindly evaluate and confirm our part mounted in your product, Especially, Please make sure to confirm whether the load current exceed Max. rated current by using the current probe. External components setting Output Current I15(mA) Output Current I5(mA) Surface Temperature Rising Temperature Rising ∆T(°C) 20 18 16 14 12 10 8 6 4 2 0 Temperature Rising ∆T(°C) FUSE: FUSE C1: Input capacitor C2: Noise removal capacitor Recommend the use of fast-acting type fuse 1.0A. Rated voltage : More than 250V Capacity : 22 to 820µF Rated ripple current : More than 0.13Arms Rated voltage : More than 250V film capacitor, or Ceramics Capacitor Capacity : 0.1 to 0.22µF Rated voltage : More than 25V Capacity : 100 to 1000µF, low impedance type ESR : Less than 0.4Ω Rated ripple current : More than 0.25Arms Evaluate it with the actual opportunity because it influences an output ripple voltage. Rated voltage : More than 16V Capacity : 100 to 1000µF, low impedance type ESR : Less than 0.4Ω Rated ripple current : More than 0.41Arms Evaluate it with the actual opportunity because it influences an output ripple voltage. Inductance : 1.0mH Rated current : More than 0.49A Peak reverse voltage : More than 400V Mean rectifying current : More than 1.0A Peak forward surge current : More than 40A This product can use even all the wave rectification. Rush current flows corresponding to the capacity of C1. Select electric power and resistance value corresponding to the start character of the module. Resistance : 10 to 22Ω, Power : More than 1/4W Be sure to use it to protect this product from thunder surge and the static electricity. Surface Temperature Rising (15V output) (I5=0mA, Vi=141V) Surface Temperature Rising 20 18 16 14 12 10 8 6 4 2 0 (5V output) (I15=0mA, Vi=141V) C3: Output capacitor (For 15V output) 0 20 40 60 80 0 50 100 150 200 250 300 350 Output Current I15(mA) Output Current I5(mA) C4: Output capacitor (For 5V output) L1: Power inductor D1: Rectifier diode R1: Rush current limitation resistance R2: Noise removal resistor ZNR: Varistor www.rohm.com c ○ 2009 ROHM Co., Ltd. All rights reserved. 1/1 2009.09 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. R0039A