Datasheet
For Automotive 300 mA
CMOS LDO Regulators
BUxxJA3DG-C series
General Description
Key Specifications
◼
◼
◼
◼
◼
◼
The BUxxJA3DG-C series are linear regulators designed
as low current consumption products for power supplies in
various automotive applications.
These products are designed for up to 6.5 V as an absolute
maximum voltage and to operate until 300 mA for the
output current with low current consumption 37 µA (Typ).
These can regulate the output with a very high accuracy,
±2 %. These regulators are therefore an ideal for any
applications requiring a low current consumption.
A logical “HIGH” at the EN pin turns on the device, and in
the other side, the devices are controlled to disable by a
logical “LOW” input to the EN pin.
The devices feature the integrated Over Current Protection
to protect the device from a damage caused by a shortcircuiting or an overload. These products also integrate
Thermal Shutdown Protection to avoid the damage by
overheating.
Furthermore, low ESR ceramic capacitors are sufficiently
applicable for the phase compensation.
Wide Temperature Range (Tj):
Operating Input Range:
Low Current Consumption:
Output Current Capability:
High Output Voltage Accuracy:
Output Voltage:
Package
SSOP5
-40 °C to +150 °C
1.7 V to 6.0 V
37 µA (Typ)
300 mA
±2 %
1.2 V to 3.3 V
W(Typ) x D(Typ) x H(Max)
2.9 mm x 2.8 mm x 1.25 mm
Features
◼
◼
◼
◼
AEC-Q100 Qualified(Note 1)
Output Shutdown Function (EN Function)
Over Current Protection (OCP)
Thermal Shutdown Protection (TSD)
(Note 1) Grade 1
Applications
◼ Automotive (Power Train, Body ECU, Infotainment,
Cluster, etc.)
Typical Application Circuit
◼ Components Externally Connected
Capacitor: 0.1 µF ≤ CIN (Min), 0.47 µF ≤ COUT ≤ 47 µF(Note 2)
(Note 2) Electrolytic ( ESR < 1 Ω), tantalum and ceramic capacitors can be used.
〇Product structure : Silicon integrated circuit
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 14 • 001
〇This product has no designed protection against radioactive rays.
1/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Ordering Information
B
U
Part
Number
x
x
Output Voltage
12 : 1.2 V
15 : 1.5 V
18 : 1.8 V
25 : 2.5 V
30 : 3.0 V
33 : 3.3 V
J
A
3
D
Series Name
Output Current Capability: 300 mA
Maximum Power Supply Voltage: 6.5 V
G
-
Package
G : SSOP5
C
y
y
Product Rank
Packaging and forming specification
C : for Automotive Embossed tape and reel
TR : The pin number 1 is the upper right
TL : The pin number 1 is the lower left
Lineup
Ordering
Output Voltage
BU12JA3DG-CTR
1.2 V
SSOP5
Reel of 3000
BU15JA3DG-CTR
1.5 V
SSOP5
Reel of 3000
BU18JA3DG-CTR
1.8 V
SSOP5
Reel of 3000
BU25JA3DG-CTR
2.5 V
SSOP5
Reel of 3000
BU30JA3DG-CTR
3.0 V
SSOP5
Reel of 3000
BU33JA3DG-CTR
3.3 V
SSOP5
Reel of 3000
BU12JA3DG-CTL
1.2 V
SSOP5
Reel of 3000
BU15JA3DG-CTL
1.5 V
SSOP5
Reel of 3000
BU18JA3DG-CTL
1.8 V
SSOP5
Reel of 3000
BU25JA3DG-CTL
2.5 V
SSOP5
Reel of 3000
BU30JA3DG-CTL
3.0 V
SSOP5
Reel of 3000
BU33JA3DG-CTL
3.3 V
SSOP5
Reel of 3000
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
Package
2/93
Packing Specification
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Contents
General Description ........................................................................................................................................................................ 1
Features.......................................................................................................................................................................................... 1
Applications .................................................................................................................................................................................... 1
Key Specifications .......................................................................................................................................................................... 1
Package .......................................................................................................................................................................................... 1
Typical Application Circuit ............................................................................................................................................................... 1
Ordering Information ....................................................................................................................................................................... 2
Lineup ............................................................................................................................................................................................. 2
Contents ......................................................................................................................................................................................... 3
Pin Configurations .......................................................................................................................................................................... 4
Pin Descriptions .............................................................................................................................................................................. 4
Block Diagram ................................................................................................................................................................................ 5
Description of Blocks ...................................................................................................................................................................... 5
Absolute Maximum Ratings ............................................................................................................................................................ 6
Thermal Resistance ........................................................................................................................................................................ 6
Operating Conditions ...................................................................................................................................................................... 7
Electrical Characteristics................................................................................................................................................................. 8
Typical Performance Curves (BU12JA3DG-C) ............................................................................................................................... 9
Typical Performance Curves (BU15JA3DG-C) ............................................................................................................................. 21
Typical Performance Curves (BU18JA3DG-C) ............................................................................................................................. 33
Typical Performance Curves (BU25JA3DG-C) ............................................................................................................................. 45
Typical Performance Curves (BU30JA3DG-C) ............................................................................................................................. 57
Typical Performance Curves (BU33JA3DG-C) ............................................................................................................................. 68
Typical Performance Curves......................................................................................................................................................... 79
Application and Implementation .................................................................................................................................................... 81
Selection of External Components ............................................................................................................................................ 81
Input Pin Capacitor ................................................................................................................................................................ 81
Output Pin Capacitor ............................................................................................................................................................. 81
Typical Application ..................................................................................................................................................................... 82
Surge Voltage Protection for Linear Regulators ........................................................................................................................ 83
Positive Surge to the Input..................................................................................................................................................... 83
Negative Surge to the Input ................................................................................................................................................... 83
Reverse Voltage Protection for Linear Regulators .................................................................................................................... 83
Protection Against Reverse Input/Output Voltage .................................................................................................................. 83
Protection Against Input Reverse Voltage.............................................................................................................................. 84
Protection Against Reverse Output Voltage when Output Connect to an Inductor ................................................................ 85
Power Dissipation ......................................................................................................................................................................... 86
SSOP5 ...................................................................................................................................................................................... 86
Thermal Design ............................................................................................................................................................................ 87
I/O Equivalence Circuits................................................................................................................................................................ 88
Operational Notes ......................................................................................................................................................................... 89
1.
Reverse Connection of Power Supply ............................................................................................................................ 89
2.
Power Supply Lines ........................................................................................................................................................ 89
3.
Ground Voltage............................................................................................................................................................... 89
4.
Ground Wiring Pattern .................................................................................................................................................... 89
5.
Operating Conditions ...................................................................................................................................................... 89
6.
Inrush Current................................................................................................................................................................. 89
7.
Thermal Consideration ................................................................................................................................................... 89
8.
Testing on Application Boards ........................................................................................................................................ 89
9.
Inter-pin Short and Mounting Errors ............................................................................................................................... 89
10.
Unused Input Pins .......................................................................................................................................................... 89
11.
Regarding the Input Pin of the IC ................................................................................................................................... 90
12.
Ceramic Capacitor .......................................................................................................................................................... 90
13.
Thermal Shutdown Protection Circuit (TSD) ................................................................................................................... 90
14.
Over Current Protection Circuit (OCP) ........................................................................................................................... 90
15.
Enable Pin ...................................................................................................................................................................... 90
Marking Diagram .......................................................................................................................................................................... 91
Physical Dimension and Packing Information ............................................................................................................................... 92
Revision History ............................................................................................................................................................................ 93
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
3/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Pin Configurations
SSOP5 (TOP VIEW)
N.C.
VOUT
VIN
GND
EN
Pin Descriptions
Pin No.
Pin Name
Pin Function
Descriptions
1
VIN
Input Voltage Pin
Set a capacitor with a capacitance of 0.1 μF (Min) or higher
between the VIN pin and GND. The selecting method is described
in Selection of External Components. If the inductance of power
supply line is high, please adjust input capacitor value.
2
GND
Ground Pin
3
EN
Enable Input Pin
4
N.C.
-
5
VOUT
Output Voltage Pin
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
Ground.
A logical “HIGH” (VENH ≥ 1.1 V) at the EN pin enables the device
and “LOW” (VENL ≤ 0.5 V) at the EN pin disables the device.
This pin is not connected to the chip.
It can keep open or it’s also possible to connect to GND.
Set a capacitor with a capacitance of 0.47 μF (Min) or higher
between the VOUT pin and GND. The selecting method is
described in Selection of External Components.
4/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Block Diagram
Description of Blocks
Block Name
Function
Description of Blocks
Enable Input
A logical “HIGH” (VENH ≥ 1.1 V) at the EN pin enables the device
and “LOW” (VENL ≤ 0.5 V) at the EN pin disables the device.
Thermal Shutdown Protection
In case maximum power dissipation exceeds or the ambient
temperature is higher than the Maximum Junction Temperature,
overheating causes the chip temperature (Tj) to rise. The TSD
protection circuit detects this and forces the gate of output
MOSFET(Power Tr.) to turn off in order to protect the device from
overheating. When the junction temperature decreases to low, the
output turns on automatically.
VREF
Reference Voltage
Generate the reference voltage.
AMP
Error Amplifier
The error amplifier amplifies the difference between the feedback
voltage of the output voltage and the reference voltage.
Over Current Protection
If the output current increases higher than the maximum output
current, it is limited by Over Current Protection to protect the device
from damage caused by an over current.
While this block is operating, the output voltage may decrease
because the output current is limited.
If an abnormal state is removed and the output current value returns
to normal, the output voltage also returns to normal state.
Output Discharge Function
Output pin is discharged by the internal resistance (Typ: 40 Ω) when
EN = “LOW” input.
EN
TSD
OCP
DISCHARGE
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
5/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Absolute Maximum Ratings
Parameter
Symbol
Ratings
Unit
VIN Pin Voltage(Note 1)
VIN
-0.3 to +6.5
V
Voltage(Note 2)
VEN
-0.3 to +6.5
V
VOUT
-0.3 to +6.5 (≤ VIN + 0.3)
V
Junction Temperature Range
Tj
-40 to +150
°C
Storage Temperature Range
Tstg
-55 to +150
°C
Tjmax
150
°C
ESD Withstand Voltage (HBM)(Note 3)
VESD_HBM
±2000
V
(CDM)(Note 4)
VESD_CDM
±750
V
EN Pin
VOUT Pin Voltage
Maximum Junction Temperature
ESD Withstand Voltage
Caution 1: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit
between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is
operated over the absolute maximum ratings.
Caution 2: Should by any chance the maximum junction temperature rating be exceeded the rise in temperature of the chip may result in deterioration of the
properties of the chip. In case of exceeding this absolute maximum rating, design a PCB with thermal resistance and power dissipation taken into
consideration by increasing board size and copper area so as not to exceed the maximum junction temperature rating.
(Note 1) Do not exceed Tjmax.
(Note 2) The start-up orders of power supply (VIN) and the VEN do not influence if the voltage is within the operation power supply voltage range.
(Note 3) ESD susceptibility Human Body Model “HBM”; base on ANSI/ESDA/JEDEC JS001 (1.5 kΩ, 100 pF).
(Note 4) ESD susceptibility Charged Device Model “CDM”; base on JEDEC JESD22-C101.
Thermal Resistance(Note 5)
Parameter
Symbol
Thermal Resistance (Typ)
1s(Note 7)
2s2p(Note 8)
Unit
SSOP5
Junction to Ambient
θJA
264.4
135.7
°C/W
Junction to Top Characterization Parameter(Note 6)
ΨJT
34
27
°C/W
(Note 5) Based on JESD51-2A(Still-Air). Using BUxxJA3DG-C.
(Note 6) The thermal characterization parameter to report the difference between junction temperature and the temperature at the top center of the outside
surface of the component package.
(Note 7) Using a PCB board based on JESD51-3.
(Note 8) Using a PCB board based on JESD51-7,.
Layer Number of
Measurement Board
Single
Material
Board Size
FR-4
114.3 mm x 76.2 mm x 1.57 mmt
Top
Copper Pattern
Thickness
Footprints and Traces
70 μm
Layer Number of
Measurement Board
4 Layers
Material
Board Size
FR-4
114.3 mm x 76.2 mm x 1.6 mmt
Top
2 Internal Layers
Bottom
Copper Pattern
Thickness
Copper Pattern
Thickness
Copper Pattern
Thickness
Footprints and Traces
70 μm
74.2 mm x 74.2 mm
35 μm
74.2 mm x 74.2 mm
70 μm
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
6/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Operating Conditions (-40 °C ≤ Tj ≤ +150 °C)
Parameter
Symbol
Min
Max
Unit
VIN
VOUT (Max) + ΔVd (Max)
6.0
V
VIN Start-Up
1.7
-
V
Enable Input Voltage
VEN
0
6.0
V
Output Current
IOUT
0
300
mA
CIN
0.1
-
µF
COUT
0.47
47
µF
ESR(COUT)
-
1
Ω
Ta
-40
+125
°C
VIN Input Voltage(Note 1)
Start-Up Voltage
Input
Capacitor(Note 2)
Output Capacitor(Note 3)
Output Capacitor Equivalent Series
Resistance
Operating Temperature
(Note 1) Minimum Input Voltage must be 1.7 V or more.
Please consider that the output voltage would be dropped (Dropout voltage ΔVd) depending on the output current.
(Note 2) If the inductance of power supply line is high, please adjust input capacitor value in order to lower the input impedance.
A lower input impedance can bring out the ideal characteristic of IC as much as possible.
It also has the effect of preventing the voltage-drop at the input line.
(Note 3) Set capacitor value which do not fall below the minimum value. This value needs to consider the temperature characteristics and DC device
characteristics.
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
7/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Electrical Characteristics
Unless otherwise specified, Tj = -40 °C to +150 °C, VIN = VOUT + 1.0 V(Note 1), IOUT = 0 mA, VEN = 1.5 V
Typical values are defined at Tj = 25 °C, VIN = VOUT + 1.0 V(Note 1)
Limit
Parameter
Shutdown Current
Current Consumption
Symbol
Unit
Conditions
2
µA
VEN = 0 V, Tj = -40 °C to +85 °C
-
10
µA
-
37
55
µA
-
37
62
µA
-
37
80
µA
MIN
TYP
MAX
-
-
-
ISD
ICC
VEN = 0 V,
Tj = -40 °C to +125 °C
IOUT ≤ 500 µA, VIN ≤ 5.5 V
Tj = +25 °C
IOUT ≤ 500 µA, VIN ≤ 5.5 V
Tj = -40 °C to +85 °C
IOUT ≤ 500 µA
Tj = -40 °C to +125 °C
IOUT = 1 mA to 300 mA
VOUT > 2.5 V
VIN = VOUT + 0.5 V to 5.5 V
VOUT ≤ 2.5 V
VIN = 3.0 V to 5.5 V
VOUT
×0.98
VOUT
VOUT
×1.02
V
-
4
8
mV
IOUT = 10 mA
VOUT ≤ 2.5 V
VIN = 3.0 V to 5.5 V
-
6
12
mV
IOUT = 10 mA
VOUT > 2.5 V
VIN = VOUT + 0.5 V to 5.5 V
-
-
15
mV
IOUT = 1 mA to 300 mA
-
-
500
mV
IOUT = 300 mA, VOUT = 1.2 V
-
-
365
mV
IOUT = 300 mA, VOUT = 1.5 V
-
-
330
mV
IOUT = 300 mA, VOUT = 1.8 V
-
-
240
mV
IOUT = 300 mA, VOUT = 2.5 V
-
-
220
mV
IOUT = 300 mA, VOUT = 3.0 V
-
-
200
mV
IOUT = 300 mA, VOUT = 3.3 V
IOMAX
300
-
-
mA
VIN > VOUT (Max) + ΔVd (Max)
IOUT(OCP)
-
450
600
mA
R.R.
-
60
-
dB
Output Noise(Note 3)
VNOISE
-
30
-
µVrms
Discharge Resistor
RDSC
25
40
75
Ω
Enable HIGH Voltage
VENH
1.1
-
6.0
V
-
Enable LOW Voltage
VENL
0
-
0.5
V
-
Enable Bias Current
IEN
-
-
4
µA
-
TTSD
155
175
195
°C
-
TTSDHYS
-
15
-
°C
-
Output Voltage
Line Regulation
Load Regulation
Dropout Voltage(Note 2)
Maximum Output Current
Over Current Protection(Note 3)
Ripple Rejection Ratio
Thermal Shutdown
Temperature(Note 3)
Thermal Shutdown
Hysteresis(Note 3)
VOUT
Reg.I
Reg.L
ΔVd
Applied VOUT × 0.95
for the VOUT Pin
VRR = 1 Vp-p, fRR = 1 kHz
IOUT = 300 mA, VIN = 5 V
BW = 10 Hz to 100 kHz
VOUT = 1.2 V
VIN = 4.0 V, VEN = 0 V
VOUT = 4.0 V
(Note 1) VIN = 3.0 V for VOUT < 2.5 V.
(Note 2) VIN = VOUT x 0.98. For outputs below 1.7 V, dropout voltage means the minimum input-to-output differential voltage with IOUT = 300 mA for regulate.
(Note 3) Not measured.
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
8/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU12JA3DG-C)
1.4
70
1.2
60
Circuit Current: ICC [µA]
Output Voltage: VOUT [V]
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
1
0.8
Tj =
Tj =
Tj =
Tj =
Tj =
0.6
0.4
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
50
40
30
0.2
10
0
0
0
2
4
Tj =
Tj =
Tj =
Tj =
Tj =
20
0
6
2
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
4
6
Input Voltage: VIN [V]
Input Voltage: VIN [V]
Figure 1. Output Voltage vs Input Voltage
VOUT = 1.2 V
Figure 2. Circuit Current vs Input Voltage
VOUT = 1.2 V
0.5
0.45
Tj =
Tj =
Tj =
Tj =
Tj =
0.4
1
Dropout Voltage: VDO [V]
Output Voltage: VOUT [V]
1.2
0.8
0.6
Tj =
Tj =
Tj =
Tj =
Tj =
0.4
0.2
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
0.35
0.3
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
0.25
0.2
0.15
0.1
0.05
0
0
0
0.2
0.4
0
0.6
0.2
0.3
Output Current: IOUT [A]
Output Current: IOUT [A]
Figure 3. Output Current Limit
VOUT = 1.2 V
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
0.1
Figure 4. Dropout Voltage vs Output Current
VIN = 1.7 V, VOUT = 1.2 V
9/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU12JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
15
1.25
Output Voltage: VOUT [V]
1.23
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
Load Regulation: Reg.L. [mV]
Tj =
Tj =
Tj =
Tj =
Tj =
1.21
1.19
1.17
Tj =
Tj =
Tj =
Tj =
Tj =
10
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
5
0
1.15
1. 7
2. 7
3. 7
4. 7
0
5. 7
0. 1
Input Voltage: VIN [V]
Figure 5. Line Regulation
VOUT = 1.2 V, IOUT = 50 mA
80
IO UT = 50 mA
90
70
IO UT = 100 mA
80
IO UT = 300 mA
Ripple Rejection: R.R. [dB]
Ripple Rejection: R.R. [dB]
0. 3
Figure 6. Load Regulation
VOUT = 1.2 V, IOUT = 1 mA to 300 mA
100
70
60
50
40
30
20
60
50
40
30
Tj = -40 °
C
20
Tj = +25 °
C
10
10
0
0.01 0.1
0. 2
Output Current: IOUT [A]
Tj = +125 °
C
0
1
10
100 1000 10000
0.01
Frequency: f [kHz]
1
10
100 1000 10000
Frequency: f [kHz]
Figure 7. PSRR vs Frequency and Output Current
CIN = 0 µF, COUT = 10 µF
VOUT = 1.2 V
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
0.1
Figure 8. PSRR vs Frequency and Temparature
CIN = 0 µF, COUT = 10 µF
VIN = 5 V, VOUT = 1.2 V, IOUT = 300 mA
10/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU12JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
80
1.218
60
1.206
1.200
1.194
IO UT = 1 mA
1.188
IO UT = 50 mA
IO UT = 100 mA
1.182
IO UT = 300 mA
10
60
IO UT
20
0.4
0
0.3
-20
-40
0.2
-60
0.1
-80
110
0
0
160
100
Figure 9. Output Voltage vs Junction temperature
VOUT = 1.2 V
0.6
AC-Coupled Output Voltage [mV]
0.5
40
20
0.4
0
0.3
-20
-40
0.2
-60
0.1
-80
-100
0
0
100
200
300
400
500
0.6
VOU T
60
IO UT
0.5
40
20
0.4
0
0.3
-20
-40
0.2
-60
0.1
-80
-100
500
0
0
Time [μs]
100
200
300
400
500
Time [μs]
Figure 11. Load Transient
VOUT = 1.2 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = 25 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
400
80
VOU T
IO UT
300
Figure 10. Load Transient
VOUT = 1.2 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = -40 °C
Output Current [A]
AC-Coupled Output Voltage [mV]
80
200
Time [μs]
Junction Temperature: Tj [°
C]
60
0.5
40
-100
1.176
-40
VOU T
Output Current [A]
Output Voltage: VOUT [V]
1.212
0.6
Output Current [A]
AC-Coupled Output Voltage [mV]
1.224
Figure 12. Load Transient
VOUT = 1.2 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = 150 °C
11/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU12JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
100
100
0.8
0.8
IO UT
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
0.1
-250
100
200
300
400
0.7
IO UT
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
0.1
-250
0
0
50
0
0
500
Time [μs]
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
0.7
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
50
100
200
300
400
500
Time [μs]
Figure 13. Load Transient
VOUT = 1.2 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = -40 °C
100
Figure 14. Load Transient
VOUT = 1.2 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 25 °C
0.8
50
0.7
IO UT
0.6
0
0.5
-50
0.4
-100
0.3
-150
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
0.2
-200
0.1
-250
0
0
100
200
300
400
500
Time [μs]
Figure 15. Load Transient
VOUT = 1.2 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
12/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU12JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
40
40
0.6
0.6
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
100
200
300
400
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
IO UT
20
0
0
500
Time [μs]
Output Current [A]
IO UT
20
AC-Coupled Output Voltage [mV]
VOU T
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
100
200
300
400
500
Time [μs]
Figure 16. Load Transient
VOUT = 1.2 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = -40 °C
40
Figure 17. Load Transient
VOUT = 1.2 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 25 °C
0.6
IO UT
20
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
0
0
100
200
300
400
500
Time [μs]
Figure 18. Load Transient
VOUT = 1.2 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
13/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU12JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
AC-Coupled Output Voltage [mV]
0.7
0.6
0
0.5
0.4
-50
0.3
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
IO UT
0.2
-100
0.1
-150
100
200
300
400
0.7
IO UT
0.6
0
0.5
0.4
-50
0.3
0.2
-100
0.1
0
0
500
Time [μs]
100
200
300
400
500
Time [μs]
Figure 19. Load Transient
VOUT = 1.2 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = -40 °C
Figure 20. Load Transient
VOUT = 1.2 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 25 °C
0.8
50
VOU T
0.7
IO UT
0.6
0
0.5
0.4
-50
0.3
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
-150
0
0
0.8
50
Output Current [A]
0.8
50
0.2
-100
0.1
-150
0
0
100
200
300
400
500
Time [μs]
Figure 21. Load Transient
VOUT = 1.2 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
14/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU12JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
40
40
0.6
0.6
0.5
0.4
0
0.3
-20
0.2
-40
0.1
-60
100
200
300
400
0.5
0.4
0
0.3
-20
0.2
-40
0.1
-60
0
0
IO UT
20
0
0
500
Time [μs]
Output Current [A]
IO UT
20
AC-Coupled Output Voltage [mV]
VOU T
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
100
200
300
400
500
Time [μs]
Figure 22. Load Transient
VOUT = 1.2 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = -40 °C
40
Figure 23. Load Transient
VOUT = 1.2 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 25 °C
0.6
IO UT
20
0.5
0.4
0
0.3
-20
0.2
-40
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
0.1
-60
0
0
100
200
300
400
500
Time [μs]
Figure 24. Load Transient
VOUT = 1.2 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
15/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU12JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
20
1
0
VIN
0.5
-20
VOU T
0
100
200
40
1.5
20
1
0
VIN
-20
VOU T
0
300
-40
0
100
200
300
Time [μs]
Time [μs]
Figure 25. Line Transient
VOUT = 1.2 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = -40 °C
Figure 26. Line Transient
VOUT = 1.2 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 25 °C
3
3
100
60
2
40
1.5
20
1
0
VIN
0.5
-20
VOU T
0
100
200
80
60
2
40
1.5
20
1
0
VIN
0.5
-20
VOU T
0
-40
0
100
2.5
Input Voltage [V]
80
2.5
Input Voltage [V]
60
2
0.5
-40
0
80
-40
0
300
100
200
300
Time [μs]
Time [μs]
Figure 27. Line Transient
VOUT = 1.2 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 85 °C
Figure 28. Line Transient
VOUT = 1.2 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
16/93
AC Cupled Output Voltage [mV]
40
1.5
AC Cupled Output Voltage [mV]
Input Voltage [V]
60
2
100
2.5
Input Voltage [V]
80
2.5
3
AC Cupled Output Voltage [mV]
100
AC Cupled Output Voltage [mV]
3
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU12JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
20
1
0
VIN
0.5
-20
VOU T
0
100
200
40
1.5
20
1
0
VIN
-20
VOU T
0
300
-40
0
100
200
300
Time [μs]
Time [μs]
Figure 29. Line Transient
VOUT = 1.2 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = -40 °C
Figure 30. Line Transient
VOUT = 1.2 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 25 °C
3
3
100
60
2
40
1.5
20
1
0
VIN
0.5
-20
VOU T
0
100
200
80
60
2
40
1.5
20
1
0
VIN
0.5
-20
VOU T
0
-40
0
100
2.5
Input Voltage [V]
80
2.5
Input Voltage [V]
60
2
0.5
-40
0
80
-40
0
300
100
200
300
Time [μs]
Time [μs]
Figure 31. Line Transient
VOUT = 1.2 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 85 °C
Figure 32. Line Transient
VOUT = 1.2 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
17/93
AC Cupled Output Voltage [mV]
40
1.5
AC Cupled Output Voltage [mV]
Input Voltage [V]
60
2
100
2.5
Input Voltage [V]
80
2.5
3
AC Cupled Output Voltage [mV]
100
AC Cupled Output Voltage [mV]
3
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU12JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
20
1
0
VIN
0.5
-20
VOU T
0
100
200
40
1.5
20
1
0
VIN
-20
VOU T
0
300
-40
0
100
200
300
Time [μs]
Time [μs]
Figure 33. Line Transient
VOUT = 1.2 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = -40 °C
Figure 34. Line Transient
VOUT = 1.2 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 25 °C
3
3
100
60
2
40
1.5
20
1
0
VIN
0.5
-20
VOU T
0
100
200
80
60
2
40
1.5
20
1
0
VIN
0.5
-20
VOU T
0
-40
0
100
2.5
Input Voltage [V]
80
2.5
Input Voltage [V]
60
2
0.5
-40
0
80
-40
0
300
100
200
300
Time [μs]
Time [μs]
Figure 35. Line Transient
VOUT = 1.2 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 85 °C
Figure 36. Line Transient
VOUT = 1.2 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
18/93
AC Cupled Output Voltage [mV]
40
1.5
AC Cupled Output Voltage [mV]
Input Voltage [V]
60
2
100
2.5
Input Voltage [V]
80
2.5
3
AC Cupled Output Voltage [mV]
100
AC Cupled Output Voltage [mV]
3
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU12JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
5
300
250
IO UT
3.5
200
3
2.5
150
2
100
1.5
1
250
VOU T
4
IO UT
3.5
Voltage [V]
VOU T
EN
200
3
2.5
150
2
100
1.5
1
50
0.5
Output Current [mA]
4.5
EN
4
300
VIN
Output Current [mA]
4.5
Voltage [V]
5
VIN
50
0.5
0
0
0
100
200
0
300
0
0
Time [μs]
100
200
300
Time [μs]
Figure 37. Start Up Waveform
VOUT = 1.2 V, IOUT = 50 mA
VIN = 3.3 V, COUT = 10 µF
Tj = -40 °C
5
Figure 38. Start Up Waveform
VOUT = 1.2 V, IOUT = 50 mA
VIN = 3.3 V, COUT = 10 µF
Tj = 25 °C
300
VIN
EN
IO UT
3.5
Voltage [V]
250
VOU T
4
200
3
2.5
150
2
100
1.5
1
Output Current [mA]
4.5
50
0.5
0
0
0
100
200
300
Time [μs]
Figure 39. Start Up Waveform
VOUT = 1.2 V, IOUT = 50 mA
VIN = 3.3 V, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
19/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU12JA3DG-C) - continued
300
6
300
5
250
5
250
200
VIN
EN
VOU T
3
150
IO UT
2
100
1
0
0
100
200
4
Voltage [V]
Voltage [V]
4
Output Current [mA]
6
150
IO UT
50
1
50
0
0
300
0
0
100
200
300
Time [μs]
Figure 41. Start Up Waveform
VOUT = 1.2 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = 25 °C
6
300
5
250
200
VIN
EN
VOU T
150
IO UT
2
100
1
50
0
Output Current [mA]
Voltage [V]
VOU T
3
100
Figure 40. Start Up Waveform
VOUT = 1.2 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = -40 °C
3
EN
2
Time [μs]
4
200
VIN
Output Current [mA]
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
0
0
100
200
300
Time [μs]
Figure 42. Start Up Waveform
VOUT = 1.2 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
20/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU15JA3DG-C)
1.6
70
1.4
60
1.2
Circuit Current: ICC [µA]
Output Voltage: VOUT [V]
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
1
0.8
Tj =
Tj =
Tj =
Tj =
Tj =
0.6
0.4
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
50
40
30
Tj =
Tj =
Tj =
Tj =
Tj =
20
10
0.2
0
0
0
2
4
0
6
2
4
6
Input Voltage: VIN [V]
Input Voltage: VIN [V]
Figure 43. Output Voltage vs Input Voltage
VOUT = 1.5 V
Figure 44. Circuit Current vs Input Voltage
VOUT = 1.5 V
1.6
0.35
1.4
Tj =
Tj =
Tj =
Tj =
Tj =
0.3
1.2
Dropout Voltage: VDO [V]
Output Voltage: VOUT [V]
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
1
0.8
0.6
Tj =
Tj =
Tj =
Tj =
Tj =
0.4
0.2
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
0.2
0.4
0.15
0.1
0
0
0.6
0.1
0.2
0.3
Output Current: IOUT [A]
Output Current: IOUT [A]
Figure 45. Output Current Limit
VOUT = 1.5 V
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
0.2
0.05
0
0
0.25
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
Figure 46. Dropout Voltage vs Output Current
VIN = 1.7 V, VOUT = 1.5 V
21/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU15JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
15
1.55
Output Voltage: VOUT [V]
1.53
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
Load Regulation: Reg.L. [mV]
Tj =
Tj =
Tj =
Tj =
Tj =
1.51
1.49
Tj =
Tj =
Tj =
Tj =
Tj =
10
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
5
1.47
0
1.45
2
3
4
5
0
6
0.1
Input Voltage: VIN [V]
Figure 47. Line Regulation
VOUT = 1.5 V, IOUT = 50 mA
80
IO UT = 50 mA
90
70
IO UT = 100 mA
80
IO UT = 300 mA
Ripple Rejection: R.R. [dB]
Ripple Rejection: R.R. [dB]
0.3
Figure 48. Load Regulation
VOUT = 1.5 V, IOUT = 1 mA to 300 mA
100
70
60
50
40
30
20
60
50
40
30
Tj = -40 °
C
20
Tj = +25 °
C
10
10
0
0.01 0.1
0.2
Output Current: IOUT [A]
1
10
0
0.01
100 1000 10000
Frequency: f [kHz]
0.1
1
10
100 1000 10000
Frequency: f [kHz]
Figure 49. PSRR vs Frequency and Output Current
CIN = 0 µF, COUT = 10 µF
VOUT = 1.5 V
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
Tj = +125 °
C
Figure 50. PSRR vs Frequency and Temparature
CIN = 0 µF, COUT = 10 µF
VIN = 5 V, VOUT = 1.5 V, IOUT = 300 mA
22/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU15JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
80
1.51
1.5
1.49
IO UT = 1 mA
IO UT = 50 mA
1.48
IO UT = 100 mA
IO UT = 300 mA
1.47
-40
10
60
110
VOU T
60
IO UT
20
0.4
0
0.3
-20
-40
0.2
-60
0.1
-80
-100
160
0
0
100
Junction Tem pera ture: Tj [°
C]
AC-Coupled Output Voltage [mV]
0.4
0
0.3
-20
-40
0.2
Output Current [A]
AC-Coupled Output Voltage [mV]
0.5
40
20
-60
0.1
-80
-100
100
200
300
400
0.6
VOU T
60
IO UT
0.5
40
20
0.4
0
0.3
-20
-40
0.2
-60
0.1
-80
0
0
500
Time [μs]
100
200
300
400
500
Time [μs]
Figure 53. Load Transient
VOUT = 1.5 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = 25 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
500
-100
0
0
400
80
VOU T
IO UT
300
Figure 52. Load Transient
VOUT = 1.5 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = -40 °C
0.6
60
200
Time [μs]
Figure 51. Output Voltage vs Junction temperature
VOUT = 1.5 V
80
0.5
40
Output Current [A]
Output Voltage: VOUT [V]
1.52
0.6
Output Current [A]
AC-Coupled Output Voltage [mV]
1.53
Figure 54. Load Transient
VOUT = 1.5 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = 150 °C
23/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU15JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
100
100
0.8
0.8
IO UT
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
0.1
-250
100
200
300
400
0.7
IO UT
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
0.1
-250
0
0
50
0
0
500
Time [μs]
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
0.7
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
50
100
200
300
400
500
Time [μs]
Figure 55. Load Transient
VOUT = 1.5 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = -40 °C
100
Figure 56. Load Transient
VOUT = 1.5 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 25 °C
0.8
50
0.7
IO UT
0.6
0
0.5
-50
0.4
-100
0.3
-150
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
0.2
-200
0.1
-250
0
0
100
200
300
400
500
Time [μs]
Figure 57. Load Transient
VOUT = 1.5 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
24/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU15JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
40
40
0.6
0.6
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
100
200
300
400
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
IO UT
20
0
0
500
Time [μs]
Output Current [A]
IO UT
20
AC-Coupled Output Voltage [mV]
VOU T
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
100
200
300
400
500
Time [μs]
Figure 58. Load Transient
VOUT = 1.5 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = -40 °C
40
Figure 59. Load Transient
VOUT = 1.5 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 25 °C
0.6
IO UT
20
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
0
0
100
200
300
400
500
Time [μs]
Figure 60. Load Transient
VOUT = 1.5 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
25/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU15JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
AC-Coupled Output Voltage [mV]
0.7
0.6
0
0.5
0.4
-50
0.3
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
IO UT
0.2
-100
0.1
-150
100
200
300
400
0.7
IO UT
0.6
0
0.5
0.4
-50
0.3
0.2
-100
0.1
0
0
500
Time [μs]
100
200
300
400
500
Time [μs]
Figure 61. Load Transient
VOUT = 1.5 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = -40 °C
Figure 62. Load Transient
VOUT = 1.5 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 25 °C
0.8
50
VOU T
0.7
IO UT
0.6
0
0.5
0.4
-50
0.3
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
-150
0
0
0.8
50
Output Current [A]
0.8
50
0.2
-100
0.1
-150
0
0
100
200
300
400
500
Time [μs]
Figure 63. Load Transient
VOUT = 1.5 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
26/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU15JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
40
0.6
40
0.6
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
100
200
300
400
IO UT
20
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
500
0
0
Time [μs]
Output Current [A]
IO UT
20
AC-Coupled Output Voltage [mV]
VOU T
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
100
200
300
400
500
Time [μs]
Figure 64. Load Transient
VOUT = 1.5 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = -40 °C
40
Figure 65. Load Transient
VOUT = 1.5 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 25 °C
0.6
IO UT
20
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
100
200
300
400
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
500
Time [μs]
Figure 66. Load Transient
VOUT = 1.5 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
27/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU15JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
2
40
1.5
20
1
0
VIN
-20
VOU T
0
100
200
80
2.5
60
2
40
1.5
20
1
0
VIN
0.5
-20
VOU T
0
-40
0
3
-40
0
300
100
200
300
Time [μs]
Time [μs]
Figure 67. Line Transient
VOUT = 1.5 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = -40 °C
Figure 68. Line Transient
VOUT = 1.5 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 25 °C
3.5
3.5
100
80
2.5
60
2
40
1.5
20
1
0
VIN
0.5
-20
VOU T
0
Input Voltage [V]
3
0
100
200
100
3
80
2.5
60
2
40
1.5
20
1
0
VIN
0.5
-20
VOU T
0
-40
-40
0
300
100
200
300
Time [μs]
Time [μs]
Figure 69. Line Transient
VOUT = 1.5 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 85 °C
Figure 70. Line Transient
VOUT = 1.5 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
28/93
AC Cupled Output Voltage [mV]
60
100
AC Cupled Output Voltage [mV]
2.5
Input Voltage [V]
80
AC Cupled Output Voltage [mV]
3
0.5
Input Voltage [V]
3.5
100
AC Cupled Output Voltage [mV]
Input Voltage [V]
3.5
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU15JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
2
40
1.5
20
1
0
VIN
-20
VOU T
0
100
200
80
2.5
60
2
40
1.5
20
1
0
VIN
0.5
-20
VOU T
0
-40
0
3
-40
0
300
100
200
300
Time [μs]
Time [μs]
Figure 71. Line Transient
VOUT = 1.5 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = -40 °C
Figure 72. Line Transient
VOUT = 1.5 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 25 °C
3.5
3.5
100
80
2.5
60
2
40
1.5
20
1
0
VIN
0.5
-20
VOU T
0
Input Voltage [V]
3
0
100
200
100
3
80
2.5
60
2
40
1.5
20
1
0
VIN
0.5
-20
VOU T
0
-40
-40
0
300
100
200
300
Time [μs]
Time [μs]
Figure 73. Line Transient
VOUT = 1.5 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 85 °C
Figure 74. Line Transient
VOUT = 1.5 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
29/93
AC Cupled Output Voltage [mV]
60
100
AC Cupled Output Voltage [mV]
2.5
Input Voltage [V]
80
AC Cupled Output Voltage [mV]
3
0.5
Input Voltage [V]
3.5
100
AC Cupled Output Voltage [mV]
Input Voltage [V]
3.5
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU15JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
2
40
1.5
20
1
0
VIN
-20
VOU T
0
100
200
80
2.5
60
2
40
1.5
20
1
0
VIN
0.5
-20
VOU T
0
-40
0
3
-40
0
300
100
200
300
Time [μs]
Time [μs]
Figure 75. Line Transient
VOUT = 1.5 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = -40 °C
Figure 76. Line Transient
VOUT = 1.5 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 25 °C
3.5
3.5
100
80
2.5
60
2
40
1.5
20
1
0
VIN
0.5
-20
VOU T
0
Input Voltage [V]
3
0
100
200
100
3
80
2.5
60
2
40
1.5
20
1
0
VIN
0.5
-20
VOU T
0
-40
-40
0
300
100
200
300
Time [μs]
Time [μs]
Figure 77. Line Transient
VOUT = 1.5 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 85 °C
Figure 78. Line Transient
VOUT = 1.5 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
30/93
AC Cupled Output Voltage [mV]
60
100
AC Cupled Output Voltage [mV]
2.5
Input Voltage [V]
80
AC Cupled Output Voltage [mV]
3
0.5
Input Voltage [V]
3.5
100
AC Cupled Output Voltage [mV]
Input Voltage [V]
3.5
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU15JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
5
5
300
300
250
IO UT
3.5
200
3
2.5
150
2
100
1.5
1
EN
250
VOU T
4
IO UT
3.5
Voltage [V]
VOU T
4
Voltage [V]
4.5
EN
Output Current [mA]
4.5
VIN
200
3
2.5
150
2
100
1.5
1
50
0.5
Output Current [mA]
VIN
50
0.5
0
0
0
0
100
200
0
0
300
Time [μs]
100
200
300
Time [μs]
Figure 79. Start Up Waveform
VOUT = 1.5 V, IOUT = 50 mA
VIN = 3.3 V, COUT = 10 µF
Tj = -40 °C
5
Figure 80. Start Up Waveform
VOUT = 1.5 V, IOUT = 50 mA
VIN = 3.3 V, COUT = 10 µF
Tj = 25 °C
300
VIN
EN
IO UT
3.5
Voltage [V]
250
VOU T
4
200
3
2.5
150
2
100
1.5
1
Output Current [mA]
4.5
50
0.5
0
0
0
100
200
300
Time [μs]
Figure 81. Start Up Waveform
VOUT = 1.5 V, IOUT = 50 mA
VIN = 3.3 V, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
31/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU15JA3DG-C) - continued
300
6
300
5
250
5
250
200
VIN
EN
3
150
VOU T
IO UT
2
100
1
0
0
100
200
4
Voltage [V]
Voltage [V]
4
Output Current [mA]
6
150
IO UT
50
1
50
0
0
0
0
300
100
200
300
Time [μs]
Figure 83. Start Up Waveform
VOUT = 1.5 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = 25 °C
6
300
5
250
200
VIN
EN
150
VOU T
IO UT
2
100
1
50
0
Output Current [mA]
Voltage [V]
VOU T
3
100
Figure 82. Start Up Waveform
VOUT = 1.5 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = -40 °C
3
EN
2
Time [μs]
4
200
VIN
Output Current [mA]
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
0
0
100
200
300
Time [μs]
Figure 84. Start Up Waveform
VOUT = 1.5 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
32/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU18JA3DG-C)
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
70
2
1.8
60
Circuit Current: ICC [µA]
Output Voltage: VOUT [V]
1.6
1.4
1.2
1
Tj =
Tj =
Tj =
Tj =
Tj =
0.8
0.6
0.4
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
50
40
30
Tj =
Tj =
Tj =
Tj =
Tj =
20
10
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
0.2
0
0
0
2
4
0
6
2
4
6
Input Voltage: VIN [V]
Input Voltage: VIN [V]
Figure 85. Output Voltage vs Input Voltage
VOUT = 1.8 V
Figure 86. Circuit Current vs Input Voltage
VOUT = 1.8 V
2
0.3
1.8
Dropout Voltage: VDO [V]
Output Voltage: VOUT [V]
1.6
1.4
1.2
1
0.8
Tj =
Tj =
Tj =
Tj =
Tj =
0.6
0.4
0.2
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
Tj =
Tj =
Tj =
Tj =
Tj =
0.25
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
0.2
0.15
0.1
0.05
0
0
0
0.2
0.4
0
0.6
Figure 87. Output Current Limit
VOUT = 1.8 V
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
0.1
0.2
0.3
Output Current: IOUT [A]
Output Current: IOUT [A]
Figure 88. Dropout Voltage vs Output Current
VIN = 1.764 V, VOUT = 1.8 V
33/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU18JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
15
1.85
Output Voltage: VOUT [V]
1.83
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
Load Regulation: Reg.L. [mV]
Tj =
Tj =
Tj =
Tj =
Tj =
1.81
1.79
1.77
1.75
Tj =
Tj =
Tj =
Tj =
Tj =
10
5
0
2.3
3.3
4.3
0
5.3
0.1
0.2
0.3
Output Current: IOUT [A]
Input Voltage: VIN [V]
Figure 89. Line Regulation
VOUT = 1.8 V, IOUT = 50 mA
Figure 90. Load Regulation
VOUT = 1.8 V, IOUT = 1 mA to 300 mA
s
100
90
90
IO UT=50mA
80
IO UT=100mA
70
IO UT=300mA
80
Ripple Rejection: R.R. [dB]
Ripple Rejection: R.R. [dB]
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
60
50
40
30
20
10
70
60
50
40
30
Tj = -40 °
C
20
Tj = +25 °
C
10
Tj = +125 °
C
0
0.01
0.1
1
10
0
100 1000 10000
0.01
Frequency: f [kHz]
0.1
1
10
100 1000 10000
Frequency: f [kHz]
Figure 91. PSRR vs Frequency and Output Current
CIN = 0 µF, COUT = 10 µF
VOUT = 1.8 V
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
Figure 92. PSRR vs Frequency and Temparature
CIN = 0 µF, COUT = 10 µF
VIN = 5 V, VOUT = 1.8 V, IOUT = 300 mA
34/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU18JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
80
1.812
1.800
1.788
IO UT=1mA
IO UT=50mA
1.776
IO UT=100mA
IO UT=300mA
1.764
VOU T
60
IO UT
20
0.4
0
0.3
-20
-40
0.2
-60
0.1
-80
-100
-40
10
60
110
160
0
0
100
Tj(℃)
80
AC-Coupled Output Voltage [mV]
IO UT
0.5
20
0.4
0
0.3
-20
-40
0.2
Output Current [A]
40
-60
0.1
-80
-100
200
300
400
0.6
VOU T
60
IO UT
0.5
40
20
0.4
0
0.3
-20
-40
0.2
-60
0.1
-80
0
0
500
Time [μs]
100
200
300
400
500
Time [μs]
Figure 95. Load Transient
VOUT = 1.8 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = 25 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
500
-100
0
100
400
80
0.6
0
300
Figure 94. Load Transient
VOUT = 1.8 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = -40 °C
VOU T
60
200
Time [μs]
Figure 93. Output Voltage vs Junction temperature
VOUT = 1.8 V
AC-Coupled Output Voltage [mV]
0.5
40
Output Current [A]
Output Voltage: VOUT[V]
1.824
0.6
Output Current [A]
AC-Coupled Output Voltage [mV]
1.836
Figure 96. Load Transient
VOUT = 1.8 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = 150 °C
35/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU18JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
100
100
0.8
0.8
0
0.6
-50
0.5
-100
0.4
-150
0.3
-200
0.2
-250
0.1
-300
0
100
200
300
400
50
0
0.6
-50
0.5
-100
0.4
-150
0.3
-200
0.2
-250
0.1
-300
0
0
500
Time [μs]
0.7
IO UT
100
200
300
400
Output Current [A]
IO UT
0
AC-Coupled Output Voltage [mV]
VOU T
0.7
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
50
500
Time [μs]
Figure 97. Load Transient
VOUT = 1.8 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = -40 °C
100
Figure 98. Load Transient
VOUT = 1.8 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 25 °C
0.8
50
0.7
IO UT
0
0.6
-50
0.5
-100
0.4
-150
0.3
-200
0.2
-250
0.1
-300
0
0
100
200
300
400
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
500
Time [μs]
Figure 99. Load Transient
VOUT = 1.8 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
36/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU18JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
40
40
0.6
0.6
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
100
200
300
400
IO UT
20
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
500
0.5
100
200
300
400
Output Current [A]
IO UT
20
AC-Coupled Output Voltage [mV]
VOU T
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
500
Time [μs]
Time [μs]
Figure 100. Load Transient
VOUT = 1.8 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = -40 °C
Figure 101. Load Transient
VOUT = 1.8 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 25 °C
40
0.6
IO UT
20
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
0
0
100
200
300
400
500
Time [μs]
Figure 102. Load Transient
VOUT = 1.8 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
37/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU18JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
100
100
0.8
0.8
0
0.6
-50
0.5
-100
0.4
-150
0.3
-200
0.2
-250
0.1
-300
0
100
200
300
400
50
0
0.6
-50
0.5
-100
0.4
-150
0.3
-200
0.2
-250
0.1
-300
0
0
500
Time [μs]
0.7
IO UT
100
200
300
400
Output Current [A]
IO UT
0
AC-Coupled Output Voltage [mV]
VOU T
0.7
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
50
500
Time [μs]
Figure 103. Load Transient
VOUT = 1.8 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = -40 °C
100
Figure 104. Load Transient
VOUT = 1.8 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 25 °C
0.8
50
0.7
IO UT
0
0.6
-50
0.5
-100
0.4
-150
0.3
-200
0.2
-250
0.1
-300
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
0
0
100
200
300
400
500
Time [μs]
Figure 105. Load Transient
VOUT = 1.8 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
38/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU18JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
40
40
0.6
0.6
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
100
200
300
400
IO UT
20
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
500
Time [μs]
0.5
100
200
300
400
Output Current [A]
IO UT
20
AC-Coupled Output Voltage [mV]
VOU T
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
500
Time [μs]
Figure 106. Load Transient
VOUT = 1.8 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = -40 °C
40
Figure 107. Load Transient
VOUT = 1.8 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 25 °C
0.6
IO UT
20
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
100
200
300
400
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
500
Time [μs]
Figure 108. Load Transient
VOUT = 1.8 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
39/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU18JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
2.5
40
2
20
1.5
0
1
VIN
0.5
-20
VOU T
0
3
100
200
60
2.5
40
2
20
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
80
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 109. Line Transient
VOUT = 1.8 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = -40 °C
Figure 110. Line Transient
VOUT = 1.8 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 25 °C
4
4
100
80
3
60
2.5
40
2
20
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
80
3
60
2.5
40
2
20
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
100
3.5
Input Voltage(V)
3.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 111. Line Transient
VOUT = 1.8 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 85 °C
Figure 112. Line Transient
VOUT = 1.8 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
40/93
AC Cupled Output Voltage(V)
60
AC Cupled Output Voltage(V)
Input Voltage(V)
3
100
3.5
Input Voltage(V)
80
AC Cupled Output Voltage(V)
3.5
Input Voltage(V)
4
100
AC Cupled Output Voltage(V)
4
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU18JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
2.5
40
2
20
1.5
0
1
VIN
0.5
-20
VOU T
0
3
100
200
60
2.5
40
2
20
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
80
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 113. Line Transient
VOUT = 1.8 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = -40 °C
Figure 114. Line Transient
VOUT = 1.8 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 25 °C
4
4
100
80
3
60
2.5
40
2
20
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
80
3
60
2.5
40
2
20
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
100
3.5
Input Voltage(V)
3.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 115. Line Transient
VOUT = 1.8 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 85 °C
Figure 116. Line Transient
VOUT = 1.8 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
41/93
AC Cupled Output Voltage(V)
60
AC Cupled Output Voltage(V)
Input Voltage(V)
3
100
3.5
Input Voltage(V)
80
AC Cupled Output Voltage(V)
3.5
Input Voltage(V)
4
100
AC Cupled Output Voltage(V)
4
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU18JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
2.5
40
2
20
1.5
0
1
VIN
0.5
-20
VOU T
0
3
100
200
60
2.5
40
2
20
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
80
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 117. Line Transient
VOUT = 1.8 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = -40 °C
Figure 118. Line Transient
VOUT = 1.8 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 25 °C
4
4
100
80
3
60
2.5
40
2
20
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
80
3
60
2.5
40
2
20
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
100
3.5
Input Voltage(V)
3.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 119. Line Transient
VOUT = 1.8 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 85 °C
Figure 120. Line Transient
VOUT = 1.8 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
42/93
AC Cupled Output Voltage(V)
60
AC Cupled Output Voltage(V)
Input Voltage(V)
3
100
3.5
Input Voltage(V)
80
AC Cupled Output Voltage(V)
3.5
Input Voltage(V)
4
100
AC Cupled Output Voltage(V)
4
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU18JA3DG-C) - continued
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
250
IO UT
3.5
200
3
2.5
150
2
100
1.5
1
250
VOU T
IO UT
3.5
200
3
2.5
150
2
100
1.5
1
50
0.5
50
0.5
0
0
0
0
100
200
0
0
300
Time(μs)
100
200
300
Time(μs)
Figure 121. Start Up Waveform
VOUT = 1.8 V, IOUT = 50 mA
VIN = 3.3 V, COUT = 10 µF
Tj = -40 °C
5
Figure 122. Start Up Waveform
VOUT = 1.8 V, IOUT = 50 mA
VIN = 3.3 V, COUT = 10 µF
Tj = 25 °C
300
VIN
EN
250
VOU T
4
IO UT
3.5
200
3
2.5
150
2
100
1.5
1
Output Current(mA)
4.5
Voltage(V)
EN
4
Voltage(V)
VOU T
4
300
VIN
4.5
EN
Output Current(mA)
4.5
Voltage(V)
5
300
VIN
Output Current(mA)
5
50
0.5
0
0
0
100
200
300
Time(μs)
Figure 123. Start Up Waveform
VOUT = 1.8 V, IOUT = 50 mA
VIN = 3.3 V, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
43/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU18JA3DG-C) - continued
300
6
300
5
250
5
250
200
VIN
EN
VOU T
3
150
IO UT
2
100
1
0
0
100
200
4
Voltage(V)
Voltage(V)
4
Output Current(mA)
6
150
IO UT
50
1
50
0
0
0
0
300
100
200
300
Time(μs)
Figure 125. Start Up Waveform
VOUT = 1.8 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = 25 °C
6
300
5
250
200
VIN
EN
VOU T
150
IO UT
2
100
1
50
0
Output Current(mA)
Voltage(V)
VOU T
3
100
Figure 124. Start Up Waveform
VOUT = 1.8 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = -40 °C
3
EN
2
Time(μs)
4
200
VIN
Output Current(mA)
Unless otherwise specified, VIN = 3.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
0
0
100
200
300
Time(μs)
Figure 126. Start Up Waveform
VOUT = 1.8 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
44/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU25JA3DG-C)
Unless otherwise specified, VIN = 3.5 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
80
70
Circuit Current: ICC [µA]
Output Voltage: VOUT [V]
2.5
2
1.5
1
Tj =
Tj =
Tj =
Tj =
Tj =
0.5
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
60
50
40
30
Tj =
Tj =
Tj =
Tj =
Tj =
20
10
0
0
0
2
4
0
6
2
Figure 127. Output Voltage vs Input Voltage
VOUT = 2.5 V
Dropout Voltage: VDO [V]
Output Voltage: VOUT [V]
Tj =
Tj =
Tj =
Tj =
Tj =
0.2
2
1.5
0.5
6
Figure 128. Circuit Current vs Input Voltage
VOUT = 2.5 V
2.5
Tj =
Tj =
Tj =
Tj =
Tj =
4
Input Voltage: VIN [V]
Input Voltage: VIN [V]
1
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
0
0.15
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
0.1
0.05
0
0
0.2
0.4
0.6
0
Output Current: IOUT [A]
Figure 129. Output Current Limit
VOUT = 2.5 V
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
0.1
0.2
0.3
Output Current: IOUT [A]
Figure 130. Dropout Voltage vs Output Current
VIN = 2.45 V, VOUT = 2.5 V
45/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU25JA3DG-C) - continued
Unless otherwise specified, VIN = 3.5 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
15
2.55
Output Voltage: VOUT [V]
2.53
2.52
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
Load Regulation: Reg.L. [mV]
Tj =
Tj =
Tj =
Tj =
Tj =
2.54
2.51
2.5
2.49
2.48
2.47
Tj =
Tj =
Tj =
Tj =
Tj =
10
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
5
2.46
0
2.45
3
4
5
0
6
0.1
Input Voltage: VIN [V]
Figure 131. Line Regulation
VOUT = 2.5 V, IOUT = 50 mA
90
90
80
80
Tj = -40 °
C
70
70
Tj = +25 °
C
60
Tj = +125 °
C
60
50
40
30
IO UT=50mA
20
IO UT=100mA
10
IO UT=300mA
0
0.01
0.1
1
10
0.3
Figure 132. Load Regulation
VOUT = 2.5 V, IOUT = 1 mA to 300 mA
Ripple Rejection: R.R. [dB]
Ripple Rejection: R.R. [dB]
0.2
Output Current: IOUT [A]
50
40
30
20
10
0
0.01
100 1000 10000
Figure 133. PSRR vs Frequency and Output Current
CIN = 0 µF, COUT = 10 µF
VOUT = 2.5 V
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
0.1
1
10
100 1000 10000
Frequency: f [kHz]
Frequency: f [kHz]
Figure 134. PSRR vs Frequency and Temparature
CIN = 0 µF, COUT = 10 µF
VIN = 5 V, VOUT = 2.5 V, IOUT = 300 mA
46/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU25JA3DG-C) - continued
Unless otherwise specified, VIN = 3.5 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
80
2.54
60
2.52
2.51
2.5
2.49
2.48
IO UT = 1 mA
2.47
IO UT = 50 mA
IO UT = 100 mA
2.46
IO UT = 300 mA
2.45
-40
10
60
110
VOU T
IO UT
20
0.4
0
0.3
-20
-40
0.2
-60
0.1
-80
-100
160
0
0
100
Junction Tem pera ture: Tj [°
C]
AC-Coupled Output Voltage [mV]
40
0.4
0
0.3
-20
-40
0.2
Output Current [A]
AC-Coupled Output Voltage [mV]
0.5
20
-60
0.1
-80
-100
100
200
300
400
0.6
VOU T
60
IO UT
0.5
40
20
0.4
0
0.3
-20
-40
0.2
-60
0.1
-80
0
0
500
Time [μs]
100
200
300
400
500
Time [μs]
Figure 137. Load Transient
VOUT = 2.5 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = 25 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
500
-100
0
0
400
80
0.6
IO UT
300
Figure 136. Load Transient
VOUT = 2.5 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = -40 °C
VOU T
60
200
Time [μs]
Figure 135. Output Voltage vs Junction temperature
VOUT = 2.5 V
80
0.5
40
Output Current [A]
Output Voltage: VOUT [V]
2.53
0.6
Output Current [A]
AC-Coupled Output Voltage [mV]
2.55
Figure 138. Load Transient
VOUT = 2.5 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = 150 °C
47/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU25JA3DG-C) - continued
Unless otherwise specified, VIN = 3.5 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
150
0.7
100
IO UT
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
AC-Coupled Output Voltage [mV]
VOU T
0.2
-200
-250
0.1
-300
0
0
100
200
300
400
VOU T
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
-250
0.1
-300
0
0
500
100
Time [μs]
AC-Coupled Output Voltage [mV]
0.7
IO UT
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
-250
0.1
-300
0
200
300
400
500
0.8
VOU T
100
0.7
IO UT
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
-250
0.1
-300
0
0
500
Time [μs]
100
200
300
400
500
Time [μs]
Figure 141. Load Transient
VOUT = 2.5 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
400
150
0.8
VOU T
100
300
Figure 140. Load Transient
VOUT = 2.5 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 25 °C
Output Current [A]
AC-Coupled Output Voltage [mV]
150
0
200
Time [μs]
Figure 139. Load Transient
VOUT = 2.5 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = -40 °C
100
0.7
IO UT
Output Current [A]
100
0.8
Output Current [A]
0.8
Output Current [A]
AC-Coupled Output Voltage [mV]
150
Figure 142. Load Transient
VOUT = 2.5 V
tR = tF = 1 µs, IOUT = 1 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
48/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU25JA3DG-C) - continued
Unless otherwise specified, VIN = 3.5 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
40
40
0.6
0.6
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
100
200
300
400
IO UT
20
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
500
0.5
100
200
300
400
Output Current [A]
IO UT
20
AC-Coupled Output Voltage [mV]
VOU T
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
500
Time [μs]
Time [μs]
Figure 143. Load Transient
VOUT = 2.5 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = -40 °C
Figure 144. Load Transient
VOUT = 2.5 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 25 °C
40
0.6
IO UT
20
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
0
0
100
200
300
400
500
Time [μs]
Figure 145. Load Transient
VOUT = 2.5 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
49/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU25JA3DG-C) - continued
Unless otherwise specified, VIN = 3.5 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
150
0.7
100
IO UT
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
AC-Coupled Output Voltage [mV]
VOU T
0.2
-200
-250
0.1
-300
0
0
100
200
300
400
VOU T
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
-250
0.1
-300
0
0
500
100
Time [μs]
AC-Coupled Output Voltage [mV]
0.7
IO UT
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
0.1
-250
-300
300
400
0.8
VOU T
100
0.7
IO UT
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
0.1
-250
0
0
500
Time [μs]
100
200
300
400
500
Time [μs]
Figure 148. Load Transient
VOUT = 2.5 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
500
-300
0
200
400
150
0.8
VOU T
100
300
Figure 147. Load Transient
VOUT = 2.5 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 25 °C
Output Current [A]
AC-Coupled Output Voltage [mV]
150
0
200
Time [μs]
Figure 146. Load Transient
VOUT = 2.5 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = -40 °C
100
0.7
IO UT
Output Current [A]
100
0.8
Output Current [A]
0.8
Output Current [A]
AC-Coupled Output Voltage [mV]
150
Figure 149. Load Transient
VOUT = 2.5 V
tR = tF = 10 µs, IOUT = 1 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
50/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU25JA3DG-C) - continued
Unless otherwise specified, VIN = 3.5 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
40
40
0.6
0.6
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
100
200
300
400
IO UT
20
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
500
Time [μs]
0.5
100
200
300
400
Output Current [A]
IO UT
20
AC-Coupled Output Voltage [mV]
VOU T
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
500
Time [μs]
Figure 150. Load Transient
VOUT = 1.5 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = -40 °C
40
Figure 151. Load Transient
VOUT = 1.5 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 25 °C
0.6
IO UT
20
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
100
200
300
400
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
500
Time [μs]
Figure 152. Load Transient
VOUT = 1.5 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
51/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU25JA3DG-C) - continued
Unless otherwise specified, VIN = 3.5 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
60
3.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 153. Line Transient
VOUT = 2.5 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = -40 °C
Figure 154. Line Transient
VOUT = 2.5 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 25 °C
5
5
100
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
100
4.5
Input Voltage(V)
4.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 155. Line Transient
VOUT = 2.5 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 85 °C
Figure 156. Line Transient
VOUT = 2.5 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
52/93
AC Cupled Output Voltage(V)
60
3.5
80
4
AC Cupled Output Voltage(V)
Input Voltage(V)
4
100
4.5
Input Voltage(V)
80
AC Cupled Output Voltage(V)
4.5
Input Voltage(V)
5
100
AC Cupled Output Voltage(V)
5
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU25JA3DG-C) - continued
Unless otherwise specified, VIN = 3.5 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
60
3.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 157. Line Transient
VOUT = 2.5 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = -40 °C
Figure 158. Line Transient
VOUT = 2.5 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 25 °C
5
5
100
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
100
4.5
Input Voltage(V)
4.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 159. Line Transient
VOUT = 2.5 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 85 °C
Figure 160. Line Transient
VOUT = 2.5 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
53/93
AC Cupled Output Voltage(V)
60
3.5
80
4
AC Cupled Output Voltage(V)
Input Voltage(V)
4
100
4.5
Input Voltage(V)
80
AC Cupled Output Voltage(V)
4.5
Input Voltage(V)
5
100
AC Cupled Output Voltage(V)
5
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU25JA3DG-C) - continued
Unless otherwise specified, VIN = 3.5 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
60
3.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 161. Line Transient
VOUT = 2.5 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = -40 °C
Figure 162. Line Transient
VOUT = 2.5 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 25 °C
5
5
100
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
100
4.5
Input Voltage(V)
4.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 163. Line Transient
VOUT = 2.5 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 85 °C
Figure 164. Line Transient
VOUT = 2.5 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
54/93
AC Cupled Output Voltage(V)
60
3.5
80
4
AC Cupled Output Voltage(V)
Input Voltage(V)
4
100
4.5
Input Voltage(V)
80
AC Cupled Output Voltage(V)
4.5
Input Voltage(V)
5
100
AC Cupled Output Voltage(V)
5
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU25JA3DG-C) - continued
Unless otherwise specified, VIN = 3.5 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
250
IO UT
3.5
200
3
2.5
150
2
100
1.5
1
250
VOU T
IO UT
3.5
200
3
2.5
150
2
100
1.5
1
50
0.5
50
0.5
0
0
0
0
100
200
300
0
0
400
Time(μs)
100
200
300
400
Time(μs)
Figure 165. Start Up Waveform
VOUT = 2.5 V, IOUT = 50 mA
VIN = 3.3 V, COUT = 10 µF
Tj = -40 °C
5
Figure 166. Start Up Waveform
VOUT = 2.5 V, IOUT = 50 mA
VIN = 3.3 V, COUT = 10 µF
Tj = 25 °C
300
VIN
EN
250
VOU T
4
IO UT
3.5
200
3
2.5
150
2
100
1.5
1
Output Current(mA)
4.5
Voltage(V)
EN
4
Voltage(V)
VOU T
4
300
VIN
4.5
EN
Output Current(mA)
4.5
Voltage(V)
5
300
VIN
Output Current(mA)
5
50
0.5
0
0
0
100
200
300
400
Time(μs)
Figure 167. Start Up Waveform
VOUT = 2.5 V, IOUT = 50 mA
VIN = 3.3 V, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
55/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU25JA3DG-C) - continued
6
300
6
300
5
250
5
250
VOU T
IO UT
3
150
2
100
1
0
0
100
200
300
VIN
4
Voltage(V)
Voltage(V)
200
EN
Output Current(mA)
VIN
4
200
EN
VOU T
IO UT
3
150
2
100
50
1
50
0
0
0
0
400
Time(μs)
Output Current(mA)
Unless otherwise specified, VIN = 3.5 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
100
200
300
400
Time(μs)
Figure 168. Start Up Waveform
VOUT = 2.5 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = -40 °C
Figure 169. Start Up Waveform
VOUT = 2.5 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = 25 °C
6
300
5
250
EN
Voltage(V)
4
200
VOU T
IO UT
3
150
2
100
1
50
0
Output Current(mA)
VIN
0
0
100
200
300
400
Time(μs)
Figure 170. Start Up Waveform
VOUT = 2.5 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
56/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU30JA3DG-C)
Unless otherwise specified, VIN = 4.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
100
Tj =
Tj =
Tj =
Tj =
Tj =
90
80
2.5
Circuit Current: ICC [µA]
Output Voltage: VOUT [V]
3
2
1.5
Tj =
Tj =
Tj =
Tj =
Tj =
1
0.5
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
70
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
60
50
40
30
20
10
0
0
0
2
4
0
6
Input Voltage: VIN [V]
2
4
6
Input Voltage: VIN [V]
Figure 171. Output Voltage vs Input Voltage
VOUT = 3.0 V
Figure 172. Circuit Current vs Input Voltage
VOUT = 3.0 V
0.2
0.18
Tj =
Tj =
Tj =
Tj =
Tj =
0.16
2.5
Dropout Voltage: VDO [V]
Output Voltage: VOUT [V]
3
2
1.5
1
Tj =
Tj =
Tj =
Tj =
Tj =
0.5
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
0.14
0.12
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
0.1
0.08
0.06
0.04
0.02
0
0
0
0.2
0.4
0.6
0
Output Current: IOUT [A]
Figure 173. Output Current Limit
VOUT = 3.0 V
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
0.1
0.2
0.3
Output Current: IOUT [A]
Figure 174. Dropout Voltage vs Output Current
VIN = 2.94 V, VOUT = 3.0 V
57/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU30JA3DG-C) - continued
Unless otherwise specified, VIN = 4.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
Tj =
Tj =
Tj =
Tj =
Tj =
3.04
Output Voltage: VOUT [V]
3.03
3.02
15
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
Load Regulation: Reg.L. [mV]
3.05
3.01
3
2.99
2.98
2.97
Tj =
Tj =
Tj =
Tj =
Tj =
10
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
5
2.96
0
2.95
3.5
4
4.5
5
5.5
0
6
0.1
Input Voltage: VIN [V]
100
80
90
70
80
70
60
50
40
20
10
0
0.01 0.1
IO UT = 50 mA
IO UT = 100 mA
IO UT = 300 mA
1
10
60
50
40
30
Tj = -40 °
C
20
Tj = +25 °
C
10
0
0.01
100 1000 10000
Frequency: f [kHz]
Tj = +125 °
C
0.1
1
10
100 1000 10000
Frequency: f [kHz]
Figure 177. PSRR vs Frequency and Output Current
CIN = 0 µF, COUT = 10 µF
VOUT = 3.0 V
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
0.3
Figure 176. Load Regulation
VOUT = 3.0V, IOUT = 1 mA to 300 mA
Ripple Rejection: R.R. [dB]
Ripple Rejection: R.R. [dB]
Figure 175. Line Regulation
VOUT = 3.0V, IOUT = 50 mA
30
0.2
Output Current: IOUT [A]
Figure 178. PSRR vs Frequency and Temparature
CIN = 0 µF, COUT = 10 µF
VIN = 5 V, VOUT = 3.0 V, IOUT = 300 mA
58/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU30JA3DG-C) - continued
Unless otherwise specified, VIN = 4.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
80
3.02
3
2.98
IO UT = 1 mA
IO UT = 50 mA
2.96
IO UT = 100 mA
IO UT = 300 mA
2.94
-40
10
60
110
VOU T
60
IO UT
20
0.4
0
0.3
-20
-40
0.2
-60
0.1
-80
-100
160
0
0
100
Junction Tem pera ture: Tj [°
C]
AC-Coupled Output Voltage [mV]
40
0.4
0
0.3
-20
-40
0.2
Output Current [A]
AC-Coupled Output Voltage [mV]
0.5
20
-60
0.1
-80
-100
100
200
300
400
0.6
VOU T
60
IO UT
0.5
40
20
0.4
0
0.3
-20
-40
0.2
-60
0.1
-80
0
0
500
Time [μs]
100
200
300
400
500
Time [μs]
Figure 181. Load Transient
VOUT = 3.0 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = 25 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
500
-100
0
0
400
80
0.6
IO UT
300
Figure 180. Load Transient
VOUT = 3.0 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = -40 °C
VOU T
60
200
Time [μs]
Figure 179. Output Voltage vs Junction temperature
VOUT = 3.0 V
80
0.5
40
Output Current [A]
Output Voltage: VOUT [V]
3.04
0.6
Output Current [A]
AC-Coupled Output Voltage [mV]
3.06
Figure 182. Load Transient
VOUT = 3.0 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = 150 °C
59/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU30JA3DG-C) - continued
Unless otherwise specified, VIN = 4.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
150
0.7
100
IO UT
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
AC-Coupled Output Voltage [mV]
VOU T
0.2
-200
-250
0.1
-300
0
0
100
200
300
400
VOU T
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
-250
0.1
-300
0
0
500
100
Time [μs]
100
AC-Coupled Output Voltage [mV]
0
0.6
-50
0.5
-100
0.4
-150
0.3
-200
0.2
-250
0.1
-300
0
300
400
Output Current [A]
AC-Coupled Output Voltage [mV]
0.7
IO UT
200
500
0.8
VOU T
100
0.7
IO UT
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
-250
0.1
-300
0
0
500
Time [μs]
100
200
300
400
500
Time [μs]
Figure 185. Load Transient
VOUT = 3.0 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
400
150
0.8
100
300
Figure 184. Load Transient
VOUT = 3.0 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 25 °C
VOU T
0
200
Time [μs]
Figure 183. Load Transient
VOUT = 3.0 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = -40 °C
50
0.7
IO UT
Output Current [A]
100
0.8
Output Current [A]
0.8
Output Current [A]
AC-Coupled Output Voltage [mV]
150
Figure 186. Load Transient
VOUT = 3.0 V
tR = tF = 1 µs, IOUT = 1 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
60/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU30JA3DG-C) - continued
Unless otherwise specified, VIN = 4.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
40
40
0.6
0.6
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
100
200
300
400
IO UT
20
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
500
0.5
100
200
300
400
Output Current [A]
IO UT
20
AC-Coupled Output Voltage [mV]
VOU T
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
500
Time [μs]
Time [μs]
Figure 187. Load Transient
VOUT = 3.0 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = -40 °C
Figure 188. Load Transient
VOUT = 3.0 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 25 °C
40
0.6
IO UT
20
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
0
0
100
200
300
400
500
Time [μs]
Figure 189. Load Transient
VOUT = 3.0 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
61/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU30JA3DG-C) - continued
Unless otherwise specified, VIN = 4.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
100
100
0.8
0.8
0
0.6
-50
0.5
-100
0.4
-150
0.3
-200
0.2
-250
0.1
-300
0
200
300
400
0
0.6
-50
0.5
-100
0.4
-150
0.3
-200
0.2
-250
0.1
-300
0
0
500
100
Time [μs]
100
AC-Coupled Output Voltage [mV]
0.7
0
0.6
-50
0.5
-100
0.4
-150
0.3
-200
0.2
-250
0.1
-300
Output Current [A]
AC-Coupled Output Voltage [mV]
500
0.8
VOU T
IO UT
300
400
0.7
IO UT
0
0.6
-50
0.5
-100
0.4
-150
0.3
-200
0.2
-250
0.1
0
0
500
Time [μs]
100
200
300
400
500
Time [μs]
Figure 192. Load Transient
VOUT = 3.0 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
50
-300
0
200
400
100
0.8
100
300
Figure 191. Load Transient
VOUT = 3.0 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 25 °C
VOU T
0
200
Time [μs]
Figure 190. Load Transient
VOUT = 3.0 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = -40 °C
50
0.7
IO UT
Output Current [A]
100
50
Output Current [A]
IO UT
0
AC-Coupled Output Voltage [mV]
VOU T
0.7
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
50
Figure 193. Load Transient
VOUT = 3.0 V
tR = tF = 10 µs, IOUT = 1 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
62/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU30JA3DG-C) - continued
Unless otherwise specified, VIN = 4.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
40
40
0.6
0.6
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
100
200
300
400
IO UT
20
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
500
Time [μs]
0.5
100
200
300
400
Output Current [A]
IO UT
20
AC-Coupled Output Voltage [mV]
VOU T
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
500
Time [μs]
Figure 194. Load Transient
VOUT = 3.0 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = -40 °C
40
Figure 195. Load Transient
VOUT = 3.0 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 25 °C
0.6
IO UT
20
0.5
0
0.4
-20
0.3
-40
0.2
-60
0.1
-80
0
0
100
200
300
400
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
500
Time [μs]
Figure 196. Load Transient
VOUT = 3.0 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
63/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU30JA3DG-C) - continued
Unless otherwise specified, VIN = 4.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
60
3.5
-40
0
300
100
200
300
Time [μs]
Time [μs]
Figure 197. Line Transient
VOUT = 3.0 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = -40 °C
Figure 198. Line Transient
VOUT = 3.0 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 25 °C
5
5
100
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
100
4.5
Input Voltage [V]
4.5
-40
0
300
100
200
300
Time [μs]
Time [μs]
Figure 199. Line Transient
VOUT = 3.0 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 85 °C
Figure 200. Line Transient
VOUT = 3.0 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
64/93
AC Cupled Output Voltage [mV]
60
3.5
80
4
AC Cupled Output Voltage [mV]
Input Voltage [V]
4
100
4.5
Input Voltage [V]
80
AC Cupled Output Voltage [mV]
4.5
Input Voltage [V]
5
100
AC Cupled Output Voltage [mV]
5
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU30JA3DG-C) - continued
Unless otherwise specified, VIN = 4.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
60
3.5
-40
0
300
100
200
300
Time [μs]
Time [μs]
Figure 201. Line Transient
VOUT = 3.0 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = -40 °C
Figure 202. Line Transient
VOUT = 3.0 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 25 °C
5
5
100
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
100
4.5
Input Voltage [V]
4.5
-40
0
300
100
200
300
Time [μs]
Time [μs]
Figure 203. Line Transient
VOUT = 3.0 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 85 °C
Figure 204. Line Transient
VOUT = 3.0 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
65/93
AC Cupled Output Voltage [mV]
60
3.5
80
4
AC Cupled Output Voltage [mV]
Input Voltage [V]
4
100
4.5
Input Voltage [V]
80
AC Cupled Output Voltage [mV]
4.5
Input Voltage [V]
5
100
AC Cupled Output Voltage [mV]
5
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU30JA3DG-C) - continued
Unless otherwise specified, VIN = 4.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
60
3.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 205. Line Transient
VOUT = 3.0 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = -40 °C
Figure 206. Line Transient
VOUT = 3.0 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 25 °C
5
5
100
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
100
4.5
Input Voltage(V)
4.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 207. Line Transient
VOUT = 3.0 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 85 °C
Figure 208. Line Transient
VOUT = 3.0 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
66/93
AC Cupled Output Voltage(V)
60
3.5
80
4
AC Cupled Output Voltage(V)
Input Voltage(V)
4
100
4.5
Input Voltage(V)
80
AC Cupled Output Voltage(V)
4.5
Input Voltage(V)
5
100
AC Cupled Output Voltage(V)
5
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU30JA3DG-C) - continued
300
6
300
5
250
5
250
Voltage [V]
EN
VOU T
IO UT
200
3
150
2
100
1
0
0
100
200
300
4
Voltage [V]
VIN
4
Output Current [mA]
6
VOU T
IO UT
200
150
2
100
50
1
50
0
0
0
0
400
100
200
300
400
Time [μs]
Figure 210. Start Up Waveform
VOUT = 3.0 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = 25 °C
6
300
5
250
VIN
VOU T
EN
IO UT
200
3
150
2
100
1
50
0
Output Current [mA]
Figure 209. Start Up Waveform
VOUT = 3.0 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = -40 °C
Voltage [V]
EN
3
Time [μs]
4
VIN
Output Current [mA]
Unless otherwise specified, VIN = 4.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
0
0
100
200
300
400
Time [μs]
Figure 211. Start Up Waveform
VOUT = 3.0 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
67/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU33JA3DG-C)
Unless otherwise specified, VIN = 4.3 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
3.5
90
80
70
Circuit Current: ICC [µA]
Output Voltage: VOUT [V]
3
2.5
2
1.5
Tj =
Tj =
Tj =
Tj =
Tj =
1
0.5
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
60
50
40
30
Tj =
Tj =
Tj =
Tj =
Tj =
20
10
0
0
0
2
4
0
6
2
4
6
Input Voltage: VIN [V]
Input Voltage: VIN [V]
Figure 212. Output Voltage vs Input Voltage
VOUT = 3.3 V
Figure 213. Circuit Current vs Input Voltage
VOUT = 3.3 V
0.18
3.5
0.16
Dropout Voltage: VDO [V]
3
Output Voltage: VOUT [V]
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
2.5
2
1.5
Tj =
Tj =
Tj =
Tj =
Tj =
1
0.5
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
Tj =
Tj =
Tj =
Tj =
Tj =
0.14
0.12
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
0.1
0.08
0.06
0.04
0.02
0
0
0
0.2
0.4
0.6
0
Output Current: IOUT [A]
0.2
0.3
Output Current: IOUT [A]
Figure 214. Output Current Limit
VOUT = 3.3 V
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
0.1
Figure 215. Dropout Voltage vs Output Current
VIN = 3.234 V, VOUT = 3.3 V
68/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU33JA3DG-C)- continued
Unless otherwise specified, VIN = 4.3 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
Tj =
Tj =
Tj =
Tj =
Tj =
Output Voltage: VOUT [V]
3.33
15
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
Load Regulation: Reg.L. [mV]
3.35
3.31
3.29
3.27
3.25
Tj =
Tj =
Tj =
Tj =
Tj =
10
5
0
3.8
4.3
4.8
5.3
5.8
0
0.1
Input Voltage: VIN [V]
70
70
Ripple Rejection: R.R. [dB]
80
60
50
40
30
IO UT=50mA
IO UT=100mA
10
0.3
Figure 217. Load Regulation
VOUT = 3.3 V, IOUT = 1 mA to 300 mA
80
20
0.2
Output Current: IOUT [A]
Figure 216. Line Regulation
VOUT = 3.3 V, IOUT = 50 mA
Ripple Rejection: R.R. [dB]
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
60
50
40
30
Tj = -40 °
C
20
Tj = +25 °
C
10
IO UT=300mA
0
Tj = +125 °
C
0
0.01
0.1
1
10
100 1000 10000
0.01
Frequency: f [kHz]
1
10
100 1000 10000
Frequency: f [kHz]
Figure 218. PSRR vs Frequency and Output Current
CIN = 0 µF, COUT = 10 µF
VOUT = 3.3 V
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
0.1
Figure 219. PSRR vs Frequency and Temparature
CIN = 0 µF, COUT = 10 µF
VIN = 5 V, VOUT = 3.3 V, IOUT = 300 mA
69/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU33JA3DG-C) - continued
Unless otherwise specified, VIN = 4.3 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
80
3.334
3.314
3.294
IO UT = 1 mA
IO UT = 50 mA
3.254
IO UT = 100 mA
IO UT = 300 mA
3.234
-40
10
60
110
IO UT
20
0.4
0
0.3
-20
-40
0.2
-60
0.1
-80
-100
160
0
0
100
Junction Temperature: Tj [°
C]
AC-Coupled Output Voltage [mV]
40
0.4
0
0.3
-20
-40
0.2
Output Current [A]
AC-Coupled Output Voltage [mV]
0.5
20
-60
0.1
-80
-100
100
200
300
400
0.6
VOU T
60
IO UT
0.5
40
20
0.4
0
0.3
-20
-40
0.2
-60
0.1
-80
0
0
500
Time [μs]
100
200
300
400
500
Time [μs]
Figure 222. Load Transient
VOUT = 3.3 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = 25 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
500
-100
0
0
400
80
0.6
IO UT
300
Figure 221. Load Transient
VOUT = 3.3 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = -40 °C
VOU T
60
200
Time [μs]
Figure 220. Output Voltage vs Junction temperature
VOUT = 3.3 V
80
0.5
40
Output Current [A]
3.274
VOU T
60
Output Current [A]
AC-Coupled Output Voltage [mV]
Output Voltage: VOUT [V]
3.354
0.6
Figure 223. Load Transient
VOUT = 3.3 V
tR = tF = 1 µs, IOUT = 0 mA to 100 mA, COUT = 10 µF
Tj = 150 °C
70/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU33JA3DG-C) - continued
Unless otherwise specified, VIN = 4.3 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
150
AC-Coupled Output Voltage [mV]
VOU T
0.7
IO UT
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
-250
0.1
-300
0
0
100
200
300
400
100
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
-250
0.1
-300
0
0
500
100
Figure 224. Load Transient
VOUT = 3.3 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = -40 °C
AC-Coupled Output Voltage [mV]
0.7
IO UT
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
-250
0.1
-300
0
200
300
400
500
0.8
VOU T
100
0.7
IO UT
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
-250
0.1
-300
0
0
500
Time [μs]
100
200
300
400
500
Time [μs]
Figure 226. Load Transient
VOUT = 3.3 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
400
150
0.8
VOU T
100
300
Figure 225. Load Transient
VOUT = 3.3 V
tR = tF = 1 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 25 °C
Output Current [A]
AC-Coupled Output Voltage [mV]
150
0
200
Time [μs]
Time [μs]
100
0.7
IO UT
Output Current [A]
100
0.8
VOU T
Output Current [A]
0.8
Output Current [A]
AC-Coupled Output Voltage [mV]
150
Figure 227. Load Transient
VOUT = 3.3 V
tR = tF = 1 µs, IOUT = 1 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
71/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU33JA3DG-C) - continued
Unless otherwise specified, VIN = 4.3 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
60
60
0.6
0.6
0.5
20
0.4
0
-20
0.3
-40
0.2
-60
0.1
-80
-100
100
200
300
400
IO UT
0.5
20
0.4
0
-20
0.3
-40
0.2
-60
0.1
-80
-100
0
0
40
0
0
500
Time [μs]
Output Current [A]
IO UT
AC-Coupled Output Voltage [mV]
VOU T
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
40
100
200
300
400
500
Time [μs]
Figure 228. Load Transient
VOUT = 3.3 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = -40 °C
60
Figure 229. Load Transient
VOUT = 3.3 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 25 °C
0.6
40
IO UT
0.5
20
0.4
0
-20
0.3
-40
0.2
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
-60
0.1
-80
-100
0
0
100
200
300
400
500
Time [μs]
Figure 230. Load Transient
VOUT = 3.3 V
tR = tF = 1 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
72/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU33JA3DG-C) - continued
Unless otherwise specified, VIN = 4.3 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
150
0.7
100
IO UT
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
AC-Coupled Output Voltage [mV]
VOU T
0.2
-200
-250
0.1
-300
0
0
100
200
300
400
VOU T
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
-250
0.1
-300
0
0
500
100
Time [μs]
AC-Coupled Output Voltage [mV]
0.7
IO UT
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
0.1
-250
-300
300
400
0.8
VOU T
100
0.7
IO UT
50
0.6
0
0.5
-50
0.4
-100
0.3
-150
0.2
-200
0.1
-250
0
0
500
Time [μs]
100
200
300
400
500
Time [μs]
Figure 233. Load Transient
VOUT = 3.3 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
500
-300
0
200
400
150
0.8
VOU T
100
300
Figure 232. Load Transient
VOUT = 3.3 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = 25 °C
Output Current [A]
AC-Coupled Output Voltage [mV]
150
0
200
Time [μs]
Figure 231. Load Transient
VOUT = 3.3 V
tR = tF = 10 µs, IOUT = 0 mA to 300 mA, COUT = 10 µF
Tj = -40 °C
100
0.7
IO UT
Output Current [A]
100
0.8
Output Current [A]
0.8
Output Current [A]
AC-Coupled Output Voltage [mV]
150
Figure 234. Load Transient
VOUT = 3.3 V
tR = tF = 10 µs, IOUT = 1 mA to 300 mA, COUT = 10 µF
Tj = 150 °C
73/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU33JA3DG-C) - continued
Unless otherwise specified, VIN = 4.3 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
60
60
0.6
0.6
0.5
20
0.4
0
-20
0.3
-40
0.2
-60
0.1
-80
-100
100
200
300
400
IO UT
0.5
20
0.4
0
-20
0.3
-40
0.2
-60
0.1
-80
-100
0
0
40
0
0
500
Time [μs]
Output Current [A]
IO UT
AC-Coupled Output Voltage [mV]
VOU T
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
40
100
200
300
400
500
Time [μs]
Figure 235. Load Transient
VOUT = 3.3 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = -40 °C
60
Figure 236. Load Transient
VOUT = 3.3 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 25 °C
0.6
40
IO UT
0.5
20
0.4
0
-20
0.3
-40
0.2
Output Current [A]
AC-Coupled Output Voltage [mV]
VOU T
-60
0.1
-80
-100
0
0
100
200
300
400
500
Time [μs]
Figure 237. Load Transient
VOUT = 3.3 V
tR = tF = 10 µs, IOUT = 90 mA to 210 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
74/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU33JA3DG-C) - continued
Unless otherwise specified, VIN = 4.3 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
60
3.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 238. Line Transient
VOUT = 3.3 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = -40 °C
Figure 239. Line Transient
VOUT = 3.3 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 25 °C
5
5
100
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
100
4.5
Input Voltage(V)
4.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 240. Line Transient
VOUT = 3.3 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 85 °C
Figure 241. Line Transient
VOUT = 3.3 V
tR = tF = 1 V/µs, IOUT = 50 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
75/93
AC Cupled Output Voltage(V)
60
3.5
80
4
AC Cupled Output Voltage(V)
Input Voltage(V)
4
100
4.5
Input Voltage(V)
80
AC Cupled Output Voltage(V)
4.5
Input Voltage(V)
5
100
AC Cupled Output Voltage(V)
5
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU33JA3DG-C) - continued
Unless otherwise specified, VIN = 4.3 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
60
3.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 242. Line Transient
VOUT = 3.3 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = -40 °C
Figure 243. Line Transient
VOUT = 3.3 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 25 °C
5
5
100
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
100
4.5
Input Voltage(V)
4.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 244. Line Transient
VOUT = 3.3 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 85 °C
Figure 245. Line Transient
VOUT = 3.3 V
tR = tF = 1 V/µs, IOUT = 100 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
76/93
AC Cupled Output Voltage(V)
60
3.5
80
4
AC Cupled Output Voltage(V)
Input Voltage(V)
4
100
4.5
Input Voltage(V)
80
AC Cupled Output Voltage(V)
4.5
Input Voltage(V)
5
100
AC Cupled Output Voltage(V)
5
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU33JA3DG-C) - continued
Unless otherwise specified, VIN = 4.3 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
60
3.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 246. Line Transient
VOUT = 3.3 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = -40 °C
Figure 247. Line Transient
VOUT = 3.3 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 25 °C
5
5
100
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
100
200
80
4
60
3.5
3
40
2.5
20
2
1.5
0
1
VIN
0.5
-20
VOU T
0
-40
0
100
4.5
Input Voltage(V)
4.5
-40
0
300
100
200
300
Time(μs)
Time(μs)
Figure 248. Line Transient
VOUT = 3.3 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 85 °C
Figure 249. Line Transient
VOUT = 3.3 V
tR = tF = 1 V/µs, IOUT = 300 mA, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
77/93
AC Cupled Output Voltage(V)
60
3.5
80
4
AC Cupled Output Voltage(V)
Input Voltage(V)
4
100
4.5
Input Voltage(V)
80
AC Cupled Output Voltage(V)
4.5
Input Voltage(V)
5
100
AC Cupled Output Voltage(V)
5
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves (BU33JA3DG-C) - continued
300
6
300
5
250
5
250
Voltage(V)
EN
IO UT
200
3
150
2
100
1
0
0
100
200
300
4
Voltage(V)
VIN
VOU T
4
Output Current(mA)
6
VOU T
IO UT
200
150
2
100
50
1
50
0
0
0
0
400
100
200
300
400
Time(μs)
Figure 251. Start Up Waveform
VOUT = 3.3 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = 25 °C
6
300
5
250
VIN
EN
VOU T
IO UT
200
3
150
2
100
1
50
0
Output Current(mA)
Figure 250. Start Up Waveform
VOUT = 3.3 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = -40 °C
Voltage(V)
EN
3
Time(μs)
4
VIN
Output Current(mA)
Unless otherwise specified, VIN = 4.3 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
0
0
100
200
300
400
Time(μs)
Figure 252. Start Up Waveform
VOUT = 3.3 V, IOUT = 50 mA
VIN = 5.0 V, COUT = 10 µF
Tj = 150 °C
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
78/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves
Unless otherwise specified, VIN = VOUT + 1.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
120
Tj =
Tj =
Tj =
Tj =
Tj =
8
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
100
GND Current: IGND [μA]
Shutdown Current: ISD [μA]
10
6
4
2
80
60
Tj =
Tj =
Tj =
Tj =
Tj =
40
20
0
0
0
2
4
0
6
0.1
Figure 253. Shutdown Current vs Input Voltage
(VEN = 0 V)
60
1.2
Output Voltage:VOUT [V]
1.4
50
40
30
IOUT = 500 μA
10
IOUT = 50 mA
10
60
110
0.8
0.6
0.4
0
160
-40
Junction Temparature: Tj [°C]
10
60
110
160
Junction Temparature: Tj [°
C]
Figure 255. GND Current vs Junction Temparature
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
1
0.2
0
-40
0.3
Figure 254. GND Current vs Output Current
70
20
0.2
Output Current: IOUT [A]
Input Voltage: VIN [V]
GND Current: IGND [μA]
-40 °
C
+25 °
C
+85 °
C
+125 °
C
+150 °
C
Figure 256. Thermal Shutdown Activation
VOUT = 1.2 V
79/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Typical Performance Curves - continued
Unless otherwise specified, VIN = VOUT+1.0 V, VEN = 1.5 V, CIN = 0.1 µF, COUT = 1.0 µF
1.1
4.0
E N On Threshold
Enable Input Current: IEN [μA]
1
EN Voltage: VEN [V]
Tj = -40 °
C
3.5
E N Off Threshold
0.9
0.8
0.7
0.6
Tj = +25 °
C
Tj = +85 °
C
3.0
Tj = +150 °
C
2.5
2.0
1.5
1.0
0.5
0.5
-40
10
60
110
0.0
160
0
Junction Temparature: Tj [°C]
Figure 257. EN Threshold Voltage vs Junction Temperature
4
6
Figure 258. Enable Input Current vs Enable Input Voltage
10
Output Noise Density [μV/√Hz]
10
Output Noise Density [μV/√Hz]
2
Enable Input Voltage: VEN [V]
1
0.1
IO UT = 0 mA
IO UT = 50 mA
IO UT = 300 mA
1
0.1
IO UT = 0 mA
IO UT = 50 mA
IO UT = 300 mA
0.01
0.01
10
100
1k
10k
10
100k
1k
10k
100k
Frequency [Hz]
Frequency [Hz]
Figure 259. Output Noise Density vs Frequency
VOUT = 1.2 V
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
100
Figure 260. Output Noise Density vs Frequency
VOUT = 3.3 V
80/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Application and Implementation
Notice: The following information is given as a reference or hint for the application and the implementation. Therefore, it does
not guarantee its operation on a specific function, accuracy, or external components in the application. Application
should be designed with sufficient margin by enough understanding the characteristics of the external components,
e.g., capacitor, and also by appropriate verification in the actual operating conditions.
Selection of External Components
Input Pin Capacitor
If the battery is placed far from the regulator or the impedance of the input-side is high, higher capacitance is required for
the input capacitor in order to prevent the voltage-drop at the input line. The input capacitor and its capacitance should be
selected depending on the line impedance which is between the input pin and the smoothing filter circuit of the power
supply. Therefore, an appropriate capacitance value which is selected by the consideration of the input impedance is
different for each application. Generally, the capacitor with capacitance value of 0.1 µF (Min) with good high frequency
characteristic is recommended for this regulator.
In addition, to prevent regulator characteristics from getting affected by deviation or variation of the external capacitor
characteristic, all input capacitors mentioned above is recommended to have a good DC bias characteristic and a stable
temperature characteristic (approximately ±15 %, e.g., X7R and X8R), satisfying high absolute maximum voltage rating
based on EIA standard. This capacitor must be placed close to the input pin and is better to be mounted on the same board
side of the regulator.
Output Pin Capacitor
The output capacitor is mandatory for the regulator in order to realize stable operation. The output capacitor with
capacitance value ≥ 0.47 µF (Min) and ESR up to 1 Ω (Max) is required between the output pin and the GND pin.
Appropriately selected capacitance value and ESR for the output capacitor can improve the transient behavior of the
regulator and can also keep the stability with better regulation loop. The correlation of the output capacitance value and
ESR is shown in the graph Output Capacitance COUT, ESR Available Area on the next page. As described in the graph, this
regulator is designed to be stable with ceramic capacitors such as MLCC, with capacitance value from 0.47 µF to 47 µF,
and with ESR value in the range of approximately 0 Ω to 1 Ω. The frequency range of ESR can be generally considered as
within about 10 kHz to 100 kHz.
Note that the provided stable area of the capacitance value and ESR in the graph is obtained under a specific set of
conditions which is based on the measurement result of a single IC on our board with a resistive load. In the actual
environment, the stability is affected by wire impedance on the board, input power supply impedance, and by load
impedance. Therefore, also note that a careful evaluation with actual application, actual usage environment, and actual
conditions is necessary to confirm the actual stability of the system.
Generally, in the transient event which exceeds the gain bandwidth of regulation loop caused by the input voltage fluctuation
or by the load fluctuation, the transient response ability of the regulator depends on the capacitance value of the output
capacitor. Basically, capacitance value 0.47 µF (Min) and more for the output capacitor is recommended as shown in the
table of Output Capacitance COUT, ESR Available Area. It is expected that the bigger the capacitance value is the better the
transient response ability will be in high frequency. Various type of capacitors can be used for this high capacity of the
output capacitor including electrolytic capacitor, electro-conductive polymer capacitor, and tantalum capacitor. Note that
depending on the type of capacitors, the size of ESR (≤1 Ω) absolute value, temperature dependency of capacitance value,
and increasing ESR at cold temperature needs to be taken into consideration.
Similar to the input pin capacitor, to avoid the influence of the deviation and variation caused by the external capacitor
characteristic, all output capacitor mentioned above must select good DC bias characteristic and temperature characteristic
(approximately ±15 %, e.g., X7R, X8R) satisfying high absolute maximum voltage rating based on EIA standard. These
capacitors should be placed close to the output pin and mounted on the same board side of the regulator, not to be
influenced by implement impedance.
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
81/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Application and Implementation - continued
1.2
Unstable Available Area
1
ESR(COUT) [Ω]
0.8
Stable Available Area
0.47 μF ≤ COUT ≤ 47 μF
ESR(COUT) ≤ 1 Ω
0.6
0.4
0.2
0
0.1
1
10
Output Capacitance COUT [μF]
Figure 261. Output Capacitance COUT, ESR Stable Available Area
(-40 °C ≤ Tj ≤ +150 °C, 1.7 V ≤ VIN ≤ 6.5 V, VEN = 1.5 V, IOUT = 0 mA to 300 mA)
Typical Application
Parameter
Symbol
Reference Value for Application
Output Current Range
IOUT
IOUT ≤ 300 mA
Output Voltage Range
VOUT
1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.0 V, 3.3 V
Output Capacitor
COUT
1.0 µF
VIN
5.0 V
CIN
0.1 µF
Input Voltage
Input Capacitor
(Note 1)
Enable Mode Voltage
VENH
1.1 V to VIN
Disable Mode Voltage
VENL
0 V to 0.5 V
(Note 1) If the inductance of power supply line is high, please adjust input capacitor value.
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
82/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Application and Implementation - continued
Surge Voltage Protection for Linear Regulators
The following shows some helpful tips to protect ICs from the possibility of surge being input which exceeds absolute
maximum rating.
Positive Surge to the Input
If there is any potential risk that positive surge higher than absolute maximum rating, e.g., 6.5 V, may be applied to the
input, a Zener Diode should be insert between the VIN and the GND to protect the device as shown in Figure 262.
VIN
VIN
D1
VOUT
GND
CIN
VOUT
COUT
Figure 262. Surges Higher than 6.5 V is applied to the Input
Negative Surge to the Input
If there is any potential risk that negative surge lower than the absolute maximum rating, e.g., -0.3 V, may be applied to
the input, a Schottky Diode should be insert between the VIN and the GND to protect the device as shown in Figure 263.
VIN
VIN
D1
CIN
VOUT
GND
VOUT
COUT
Figure 263. Surges Lower than -0.3 V is applied to the Input
Reverse Voltage Protection for Linear Regulators
A linear regulator which is one of the integrated circuits (IC) operates normally in the condition that higher input voltage is
always supplied than the output voltage. However, there is a possibility of abnormal situation to occur where the output voltage
becomes higher than the input voltage. As for the input and output, voltage and current condition may be reversed due to
reverse polarity connection and certain inductor component. If the countermeasure is not implemented, it may cause damage
to the IC. The following describe protection method of ICs in reverse voltage occasion.
Protection Against Reverse Input/Output Voltage
In the case where MOS FET is used as a pass transistor, a parasitic body diode generally exists between the drain-source.
If the output voltage becomes higher than the input voltage and with its voltage difference exceeding VF of the body diode,
the reverse current flows from the output to the input via body diode as shown in Figure 264.
Because this body diode is parasitic element, current which flows in it is not limited by the protection function. Therefore,
too much reverse current may cause damage to degrade or may destroy the semiconductor elements of the regulator.
IR
VOUT
VIN
Error
AMP.
VREF
Figure 264. Reverse Current Path in a MOS Linear Regulator
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
83/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Protection Against Reverse Input/Output Voltage – continued
To prevent the reverse current flow inside the IC, as an effective solution implement an external bypass diode as shown in
Figure 265. Note that the bypass diode must be turned on prior to the body diode inside the IC. Forward voltage VF lower
than the internal body diode should be selected as external bypass diode. Should select a diode which has a rated reverse
voltage greater than the IC’s input maximum voltage and also which has a rated forward current greater than the anticipated
reverse current in the actual application.
D1
VIN
VIN
VOUT
VOUT
GND
CIN
COUT
Figure 265. Bypass Diode for Reverse Current Diversion
A Schottky barrier diode which has a characteristic of low forward voltage (VF) matches the requirement for the external
diode to protect the IC from the reverse current, however it also has a characteristic that the leakage (I R) caused by the
reverse voltage can be bigger than other diodes. Therefore, it should be taken into a consideration when choosing it,
because if IR is large, it may cause current consumption to increase, or output voltage to rise in the light-load current
condition. IR of Schottky diode has positive temperature characteristic, which the details should be checked by the
datasheet of the product, and careful confirmation of the behavior in the actual application is mandatory.
Even in the condition where the input/output voltage is inverted, if the VIN pin becomes open as shown in Figure 266, or
if the VIN pin becomes high impedance as designed in the system, it cannot damage or degrade the parasitic element. It
is because a reverse current via pass transistor becomes extremely low. In this case, therefore, the protection external
diode is not necessary.
ON→OFF
IBIAS
VIN
VIN
VOUT
VOUT
GND
CIN
COUT
Figure 266. Open VIN
Protection Against Input Reverse Voltage
When connecting input of IC to power supply, if accidentally reverse connect the plus and minus or if input may become
lower than the GND pin, large current which flows in the internal electrostatic breakdown prevention diode set between
VIN and GND as shown in Figure 267 may destroy the IC.
Simplest way to prevent this problem is to connect Schottky barrier diode or rectifier diode to power supply line in series
as shown in Figure 268. However, it increases a power loss calculated as VF × IIN, and due to forward voltage VF of diode
the voltage drop occurs to input voltage at the normal power supply line.
Generally, the Schottky barrier diode has lower VF than rectifier diode and contributes to rather smaller power loss. If IC
has load currents, the required input current to the IC is also bigger. In this case, this external diode generates heat more,
therefore it should be taken into the consideration of a selection for diode with enough margin in power dissipation. On the
other hands, in the reverse connection condition, a reverse current passes this diode, however, it can be negligible because
its small amount.
VIN
VIN
VOUT
VOUT
-
D1
VIN
CIN
GND
COUT
CIN
+
GND
VOUT
GND
VOUT
COUT
GND
Figure 267. Current Path in Reverse Input Connection
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
VIN
84/93
Figure 268. Protection against Reverse Polarity 1
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Protection Against Input Reverse Voltage - continued
Figure 269 shows a circuit in which a P-channel MOSFET is connected in series to the power. The body diode (parasitic
element) is located in the drain-source junction area of the MOSFET. The drop voltage in a forward connection is calculated
by the on-state resistance of the MOSFET and the output current IO. Because it is smaller than the drop voltage by the
diode as shown in Figure 268, as a result power loss becomes less. No current flows in a reverse connection where the
MOSFET remains off in Figure 269.
If the gate-source voltage exceeds maximum rating of MOSFET gate-source junction with considered derating curve,
reduce the gate-source junction voltage by connecting resistor voltage divider as shown in Figure 270.
Q1
VIN
Q1
VIN
VIN
GND
CIN
VOUT
VOUT
VOUT
VIN
R1
COUT
R2
CIN
VOUT
GND
COUT
Figure 270. Protection against Reverse Polarity 3
Figure 269. Protection against Reverse Polarity 2
Protection Against Reverse Output Voltage when Output Connect to an Inductor
If the output load is inductive, electrical energy accumulated in the inductive load is released to the ground at the moment
that the output voltage is turned off. There is an ESD protection diode between output and ground pin inside the IC and
large current flowing in this diode may eventually destruct the IC. To prevent this situation, connect a Schottky barrier diode
in parallel to the diode as shown in Figure 271.
Further, if a long wire is used to connect the output pin of the IC and the load, observe the waveform on an oscilloscope to
confirm whether the negative voltage is generated at the VOUT pin or not when the output voltage is turned off, since there
is a possibility of the load to become inductive. An additional diode is required for a motor load that is affected by its counter
electromotive force, as it produces an electrical current in a similar way.
VIN
VIN
VOUT
VOUT
GND
CIN
COUT
GND
D1
XLL
GND
Figure 271. Current Path in Inductive Load (Output: Off)
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
85/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Power Dissipation
SSOP5
(1): 1-layer PCB
(Copper foil area on the reverse side of PCB: 0 mm × 0 mm)
Board material: FR-4
Board size: 114.3 mm × 76.2 mm × 1.57 mmt
Top copper foil: ROHM recommended footprint
+ wiring to measure, 2 oz. copper.
1
(2)0.92 W
Power Dissipation: Pd [W]
0.8
(2): 4-layer PCB
(Copper foil area on the reverse side of PCB: 74.2 mm × 74.2 mm)
Board material: FR-4
Board size: 114.3 mm × 76.2 mm × 1.60 mmt
Top copper foil: ROHM recommended footprint
+ wiring to measure, 2 oz. copper.
2 inner layers copper foil area of PCB:
74.2 mm x 74.2 mm, 1 oz. copper.
Copper foil area on the reverse side of PCB:
74.2 mm x 74.2 mm, 2 oz. copper.
0.6
(1)0.47 W
0.4
0.2
0
0
25
50
75
100
125
Ambient Temperature: Ta [°C]
150
Condition (1): θJA = 264.4 °C/W, ΨJT (top center) = 34 °C/W
Condition (2): θJA = 135.7 °C/W, ΨJT (top center) = 27 °C/W
Figure 272. Power Dissipation Graph
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
86/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Thermal Design
This product exposes a frame on the back side of the package for thermal efficiency improvement. The power consumption
of the IC is decided by the dropout voltage condition, the load current and the current consumption. Refer to power dissipation
curves illustrated in Figure 12 when using the IC in an environment of Ta ≥ 25 °C. Even if the ambient temperature Ta is at
25°C, chip junction temperature (Tj) can be very high depending on the input voltage and the load current. Consider the
design to be Tj ≤ Tjmax = 150 °C in whole operating temperature range.
Should by any condition the maximum junction temperature Tjmax = 150 °C rating be exceeded by the temperature increase
of the chip, it may result in deterioration of the properties of the chip. The thermal impedance in this specification is based on
recommended PCB and measurement condition by JEDEC standard. Therefore, need to be careful because it might be
different from the actual use condition. Verify the application and allow sufficient margins in the thermal design by the following
method to calculate the junction temperature Tj. Tj can be calculated by either of the two following methods.
1. The following method is used to calculate the junction temperature Tj with ambient temperature Ta.
𝑇𝑗 = 𝑇𝑎 + 𝑃𝐶 × 𝜃𝐽𝐴 [°C]
Where:
Tj
Ta
PC
θJA
is the Junction Temperature
is the Ambient Temperature
is the Power Consumption
is the Thermal Resistance (Junction to Ambient)
2. The following method is also used to calculate the junction temperature Tj with top center of case’s (mold) temperature TT.
𝑇𝑗 = 𝑇𝑇 + 𝑃𝐶 × 𝛹𝐽𝑇 [°C]
Where:
Tj
TT
PC
ΨJT
is the Junction Temperature
is the Top Center of Case’s (mold) Temperature
is the Power consumption
is the Thermal Resistance (Junction to Top Center of Case)
3. The following method is used to calculate the power consumption Pc (W).
𝑃𝑐 = (𝑉𝐼𝑁 − 𝑉𝑂𝑈𝑇 ) × 𝐼𝑂𝑈𝑇 + 𝑉𝐼𝑁 × 𝐼𝐶𝐶 [W]
Where:
PC
VIN
VOUT
IOUT
ICC
is the Power Consumption
is the Input Voltage
is the Output Voltage
is the Load Current
is the Current Consumption
Calculation Example
If VIN = 5.0 V, VOUT = 3.3 V, IOUT = 100 mA, ICC = 37 μA, the power consumption Pc can be calculated as follows:
𝑃𝐶 = (𝑉𝐼𝑁 − 𝑉𝑂𝑈𝑇 ) × 𝐼𝑂𝑈𝑇 + 𝑉𝐼𝑁 × 𝐼𝐶𝐶
= (5.0 𝑉 – 3.3 𝑉) × 100 𝑚𝐴 + 5.0 𝑉 × 37 𝜇𝐴
= 0.17 𝑊
At ambient temperature Ta = 125 °C,
the thermal impedance (Junction to Ambient) θJA = 135.7 °C/W (4-layer PCB)
𝑇𝑗 = 𝑇𝑎𝑚𝑎𝑥 + 𝑃𝐶 × 𝜃𝐽𝐴
= 125 °𝐶 + 0.17 𝑊 × 135.7 °𝐶/𝑊
= 148.1 °𝐶
When operating the IC, the top center of case’s (mold) temperature TT = 100 °C, ΨJT = 27 °C/W (4-layer PCB)
𝑇𝑗 = 𝑇𝑇 + 𝑃𝐶 × 𝛹𝐽𝑇
= 100 °𝐶 + 0.17 𝑊 × 27 °𝐶/𝑊
= 104.6 °𝐶
If it is difficult to ensure the margin by the calculations above, it is recommended to expand the copper foil area of the
board, increasing the layer and thermal via between thermal land pad for optimum thermal performance.
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
87/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
I/O Equivalence Circuits
Pin 1 (VIN)
Pin 3 (EN)
Pin 5 (VOUT)
VIN
VIN
VIN
2.6 MΩ
(Typ)
Internal
Circuit
EN
VOUT
R1
55 kΩ
(Typ)
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
R2
88/93
40 Ω
(Typ)
Output Voltage [V]
(Typ)
R1 [kΩ]
(Typ)
R2 [kΩ]
(Typ)
1.2
1.5
1.8
2.5
3.0
3.3
99
144
190
290
364
410
76
76
76
76
76
76
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Operational Notes
1.
Reverse Connection of Power Supply
Connecting the power supply in reverse polarity can damage the IC. Take precautions against reverse polarity when
connecting the power supply, such as mounting an external diode between the power supply and the IC’s power supply
pins.
2.
Power Supply Lines
Design the PCB layout pattern to provide low impedance supply lines. Furthermore, connect a capacitor to ground at
all power supply pins. Consider the effect of temperature and aging on the capacitance value when using electrolytic
capacitors.
3.
Ground Voltage
Ensure that no pins are at a voltage below that of the ground pin at any time, even during transient condition.
4.
Ground Wiring Pattern
When using both small-signal and large-current ground traces, the two ground traces should be routed separately but
connected to a single ground at the reference point of the application board to avoid fluctuations in the small-signal
ground caused by large currents. Also ensure that the ground traces of external components do not cause variations
on the ground voltage. The ground lines must be as short and thick as possible to reduce line impedance.
5.
Operating Conditions
The function and operation of the IC are guaranteed within the range specified by the recommended operating
conditions. The characteristic values are guaranteed only under the conditions of each item specified by the electrical
characteristics.
6.
Inrush Current
When power is first supplied to the IC, it is possible that the internal logic may be unstable and inrush current may flow
instantaneously due to the internal powering sequence and delays, especially if the IC has more than one power supply.
Therefore, give special consideration to power coupling capacitance, power wiring, width of ground wiring, and routing
of connections.
7.
Thermal Consideration
The power dissipation under actual operating conditions should be taken into consideration and a sufficient margin
should be allowed in the thermal design. On the reverse side of the package this product has an exposed heat pad for
improving the heat dissipation. The amount of heat generation depends on the voltage difference between the input
and output, load current, and bias current. Therefore, when actually using the chip, ensure that the generated heat
does not exceed the Pd rating. If Junction temperature is over Tjmax (= 150 °C), IC characteristics may be worse due
to rising chip temperature. Heat resistance in specification is measurement under PCB condition and environment
recommended in JEDEC. Ensure that heat resistance in specification is different from actual environment.
8.
Testing on Application Boards
When testing the IC on an application board, connecting a capacitor directly to a low-impedance output pin may subject
the IC to stress. Always discharge capacitors completely after each process or step. The IC’s power supply should
always be turned off completely before connecting or removing it from the test setup during the inspection process. To
prevent damage from static discharge, ground the IC during assembly and use similar precautions during transport and
storage.
9.
Inter-pin Short and Mounting Errors
Ensure that the direction and position are correct when mounting the IC on the PCB. Incorrect mounting may result in
damaging the IC. Avoid nearby pins being shorted to each other especially to ground, power supply and output pin.
Inter-pin shorts could be due to many reasons such as metal particles, water droplets (in very humid environment) and
unintentional solder bridge deposited in between pins during assembly to name a few.
10. Unused Input Pins
Input pins of an IC are often connected to the gate of a MOS transistor. The gate has extremely high impedance and
extremely low capacitance. If left unconnected, the electric field from the outside can easily charge it. The small charge
acquired in this way is enough to produce a significant effect on the conduction through the transistor and cause
unexpected operation of the IC. So unless otherwise specified, unused input pins should be connected to the power
supply or ground line.
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
89/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Operational Notes – continued
11. Regarding the Input Pin of the IC
In the construction of this IC, P-N junctions are inevitably formed creating parasitic diodes or transistors. The
operation of these parasitic elements can result in mutual interference among circuits, operational faults, or physical
damage. Therefore, conditions which cause these parasitic elements to operate, such as applying a voltage to an
input pin lower than the ground voltage should be avoided. Furthermore, do not apply a voltage to the input pins
when no power supply voltage is applied to the IC. Even if the power supply voltage is applied, make sure that the
input pins have voltages within the values specified in the electrical characteristics of this IC.
12. Ceramic Capacitor
When using a ceramic capacitor, determine a capacitance value considering the change of capacitance with
temperature and the decrease in nominal capacitance due to DC bias and others.
13. Thermal Shutdown Protection Circuit (TSD)
This IC has a built-in thermal shutdown circuit that prevents heat damage to the IC. Normal operation should always
be within the IC’s maximum junction temperature rating. If however the rating is exceeded for a continued period, the
junction temperature (Tj) will rise which will activate the TSD circuit that will turn OFF power output pins. When the Tj
falls below the TSD threshold, the circuits are automatically restored to normal operation.
Note that the TSD circuit operates in a situation that exceeds the absolute maximum ratings and therefore, under no
circumstances, should the TSD circuit be used in a set design or for any purpose other than protecting the IC from heat
damage.
14. Over Current Protection Circuit (OCP)
This IC incorporates an integrated overcurrent protection circuit that is activated when the load is shorted. This
protection circuit is effective in preventing damage due to sudden and unexpected incidents. However, the IC should
not be used in applications characterized by continuous operation or transitioning of the protection circuit.
15. Enable Pin
The EN pin is for controlling ON/OFF the output voltage. Do not make voltage level of chip enable keep floating level,
or between VENH and VENL. Otherwise, the output voltage would be unstable or indefinite.
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
90/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Marking Diagram
SSOP5(TOP VIEW)
Part Number Marking
Lot Number
Part Number
BU12JA3DG-CTR
BU12JA3DG-CTL
BU15JA3DG-CTR
BU15JA3DG-CTL
BU18JA3DG-CTR
BU18JA3DG-CTL
BU25JA3DG-CTR
BU25JA3DG-CTL
BU30JA3DG-CTR
BU30JA3DG-CTL
BU33JA3DG-CTR
BU33JA3DG-CTL
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
Output Voltage [V]
Part Number Marking
1.2
ar
1.5
au
1.8
ay
2.5
ba
3.0
bb
3.3
bd
91/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Physical Dimension and Packing Information
Package Name
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
SSOP5
92/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
BUxxJA3DG-C series
Revision History
Date
Revision
15.Nov.2021
001
New Release
27.Jun.2022
002
Add Typical Performance data
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
Changes
93/93
TSZ02201-0BHB0AD00070-1-2
27.Jun.2022 Rev.002
Notice
Precaution on using ROHM Products
1.
If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1),
aircraft/spacecraft, nuclear power controllers, etc.) and whose malfunction or failure may cause loss of human life,
bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales
representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any
ROHM’s Products for Specific Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU
CHINA
CLASSⅢ
CLASSⅡb
CLASSⅢ
CLASSⅢ
CLASSⅣ
CLASSⅢ
2.
ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3.
Our Products are not designed under any special or extraordinary environments or conditions, as exemplified below.
Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the
use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our
Products under any special or extraordinary environments or conditions (as exemplified below), your independent
verification and confirmation of product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (Exclude cases where no-clean type fluxes is used.
However, recommend sufficiently about the residue.); or Washing our Products by using water or water-soluble
cleaning agents for cleaning residue after soldering
[h] Use of the Products in places subject to dew condensation
4.
The Products are not subject to radiation-proof design.
5.
Please verify and confirm characteristics of the final or mounted products in using the Products.
6.
In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse, is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7.
De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in
the range that does not exceed the maximum junction temperature.
8.
Confirm that operation temperature is within the specified range described in the product specification.
9.
ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1.
When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2.
In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice-PAA-E
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.004
Precautions Regarding Application Examples and External Circuits
1.
If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2.
You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper
caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be
applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).
Precaution for Storage / Transportation
1.
Product performance and soldered connections may deteriorate if the Products are stored in the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl 2, H2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2.
Even under ROHM recommended storage condition, solderability of products out of recommended storage time period
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is
exceeding the recommended storage time period.
3.
Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads
may occur due to excessive stress applied when dropping of a carton.
4.
Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of
which storage time is exceeding the recommended storage time period.
Precaution for Product Label
A two-dimensional barcode printed on ROHM Products label is for ROHM’s internal use only.
Precaution for Disposition
When disposing Products please dispose them properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act
Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign
trade act, please consult with ROHM in case of export.
Precaution Regarding Intellectual Property Rights
1.
All information and data including but not limited to application example contained in this document is for reference
only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any
other rights of any third party regarding such information or data.
2.
ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the
Products with other articles such as components, circuits, systems or external equipment (including software).
3.
No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM
will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to
manufacture or sell products containing the Products, subject to the terms and conditions herein.
Other Precaution
1.
This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2.
The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3.
In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
4.
The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
Notice-PAA-E
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.004
Datasheet
General Precaution
1. Before you use our Products, you are requested to carefully read this document and fully understand its contents.
ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any
ROHM’s Products against warning, caution or note contained in this document.
2. All information contained in this document is current as of the issuing date and subject to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales
representative.
3.
The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all
information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or
liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccuracy or errors of or
concerning such information.
Notice – WE
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.001