BU4093BF-E2

Standard ICs Quad 2-input NAND Schmitt trigger BU4093B / BU4093BF / BU4093BFV The BU4093B, BU4093BF, and BU4093BFV are 4-circuit, 2-input NAND gates whose input pins all have a Schmitt trigger function. As the circuit threshold voltages are different when the input waveform rises and when it falls (VIH, VIL), they can be used for line receivers, waveform rectification, multivibrators, and other purposes in addition to the customary usage as a NAND gate. They may be used in place of the BU4011B which uses the same pin connection. •1)Features Low power dissipation. 2) Wide range of operating power supply voltages. 3) High input impedance. 4) High fan-out. 5) Direct drive of 2 L-TTL inputs and 1 LS-TTL input. •Block diagram A1 1 14 VDD B1 2 13 A4 O1 3 12 B4 O2 4 11 O4 B2 5 10 O3 A2 6 9 B3 VSS 7 8 A3 •Truth table INPUT OUTPUT A B L L H L H H H L H H H L 1 Standard ICs BU4093B / BU4093BF / BU4093BFV •Absolute maximum ratings (V = 0V, Ta = 25°C) SS Parameter Symbol Limits Unit VDD – 0.3 ~ + 18 V Power supply voltage Pd 1000 (DIP), 450 (SOP), 350 (SSOP) mW Operating temperature Topr – 40 ~ + 85 °C Storage temperature Tstg – 55 ~ + 150 °C – 0.3 ~ VDD + 0.3 V Power dissipation VIN Input voltage characteristics •DCElectrical characteristics (unless otherwise noted, V SS Parameter Input high level voltage Symbol VIH Min. Typ. Max. 3.5 — — 7.0 — — 11.0 — — — — 1.5 — — 3.0 Unit VDD (V) Conditions Measurement circuit — Fig.1 — Fig.1 5 V 10 15 5 Input low level voltage VIL — — 4.0 Input high level current IIH — — 0.3 µA 15 VIH = 15V Fig.1 Input low level current IIL — — – 0.3 µA 15 VIL = 0V Fig.1 4.95 — — 9.95 — — V 10 IO = 0mA Fig.1 IO = 0mA Fig.1 Output high level voltage Output low level voltage Output high level current Output low level current Static VOH VOL IOH IOL IDD current dissipation Hysteresis voltage 2 = 0V, Ta = 25°C) VH V 10 15 5 14.95 — — 15 — — 0.05 5 — — 0.05 — — 0.05 – 0.44 — — – 1.1 — — V 10 15 mA 5 VOH = 4.6V 10 VOH = 9.5V – 3.0 — — 15 VOH = 13.5V 0.44 — — 5 VOL = 0.4V 1.1 — — 10 VOL = 0.5V 3.0 — — 15 VOL = 1.5V — — 1 5 — — 2 — — 4 0.17 — 0.39 0.25 — 0.60 0.33 — 0.90 mA µA 10 VI = VDD or GND Fig.1 Fig.1 Fig.1 15 5 V 10 15 — Fig.3 Standard ICs BU4093B / BU4093BF / BU4093BFV Switching characteristics (unless otherwise noted, VSS = 0V, Ta = 25°C, CL = 50pF) Parameter Output rise time Output fall time Propagation delay time, "L" to "H" Propagation delay Symbol tTLH tTHL tPLH tPHL time, "H" to "L" Input capacitance CIN Min. Typ. Max. Unit. — 100 — — 50 — — 40 — 15 — 100 — 5 — 50 — — 40 — — 125 — — 50 — VDD (V) Conditions Measurement circuit — Fig.2 — Fig.2 — Fig.2 — Fig.2 — — 5 ns 10 ns 10 15 5 ns 10 — 40 — 15 — 125 — 5 — 50 — — 40 — — 5 — ns 10 15 pF •Measurement circuits — VDD A V GND Fig. 1 DC characteristics VDD 20ns 20ns 90% 50% VDD 10% P.G. tPLH tPHL CL = 50pF 50% VIN 10% GND GND tTHL Fig. 2 Switching characteristic VOUT 90% tTLH Fig. 3 Hysteresis voltage 3 Standard ICs BU4093B / BU4093BF / BU4093BFV •Electrical characteristic curve POWER DISSIPATION: Pd (mW) 1200 1000 DIP14 800 600 SOP14 400 SSOP - B14 200 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE: Ta (°C) Fig. 4 Power dissipation vs. Ta •External dimensions (Units: mm) BU4093B BU4093BF 19.4 ± 0.3 3.2 ± 0.2 0.3 ± 0.1 0.5 ± 0.1 0° ~ 15° 2.54 14 8 1 7 1.27 0.15 ± 0.1 4.4 ± 0.2 6.2 ± 0.3 1.5 ± 0.1 7.62 0.11 7 0.51Min. 1 4.25 ± 0.3 8.7 ± 0.2 8 6.5 ± 0.3 14 0.4 ± 0.1 0.3Min. 0.15 DIP14 SOP14 BU4093BFV 8 1 7 0.65 0.15 ± 0.1 4.4 ± 0.2 0.1 1.15 ± 0.1 6.4 ± 0.3 5.0 ± 0.2 14 0.22 ± 0.1 0.3Min. 0.1 SSOP-B14 4 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0