BU4S11G2

General-purpose CMOS Logic IC Series (BU4S,BU4000B Series) Single Gate CMOS Logic ICs BU4S01G2, BU4S11G2, BU4SU69G2,BU4S71G2, BU4S81G2, BU4S584G2 ●Description The BU4SxxxG2 are 1ch logic ICs encapsulated in an SSOP5 package. They are interchangeable with the genaral-purpose BU4000B series. No.09050EAT01 ●Features 1) Low power consumption 2) Surface mount package (SSOP5) 3) Broad operating supply voltage range: 3V-16V 4) High input impedance 5) High fan out 6) L-TTL2 and LS-TTL1 inputs can be driven directly. 7) Function compatible with BU4000B series (1ch). ●Applications Suitable for use where low power consumption and a high degree of noise tolerance are required. ●Lineup Single Gate CMOS Logic Logic Gate 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit NOR gate NAND gate INV gate OR gate AND gate INV gate BU4S01G2 BU4S11G2 (Single 2-input NOR gate) (Single 2-input NAND gate) BU4SU69G2 (Single inverter gate) BU4S71G2 BU4S81G2 (Single OR gate) (Single 2-input AND gate) BU4S584G2 (Single Schmitt trigger inverter) www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 1/16 2009.06 - Rev.A BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2 ●Absolute Maximum Ratings Parameter Power supply voltage Supply current Operating temperature Storage temperature Input voltage Maximum junction temperature Symbol Technical Note Limit Unit BU4S01G2 BU4S11G2 BU4SU69G2 BU4S71G2 BU4S81G2 BU4S584G2 VDD -0.3 to 18 V Iin ±10 mA Topr -40 to 85 ℃ Tstg -55 to 150 ℃ VIN -0.3 to VDD+0.3 V Tjmax 150 ℃ ●Recommended Operating Conditions Parameter Operating power supply Input voltage ●Thermal Derating Curve 1400 VDD VDD Symbol VDD VIN Limit Unit BU4S01G2 BU4S11G2 BU4SU69G2 BU4S71G2 BU4S81G2 BU4S584G2 3 to 16 V 0 to VDD V ●Input / output Equivalent Circuits VDD VDD 1200 670[mV] BU4S Series 　 Power Dissipation　 Pd〔mW〕 1000 (＊1) 800 BU4S01G2 BU4S11G2 BU4SU69G2 BU4S71G2 BU4S81G2 BU4S584G2 600 GND GND GND GND 400 ＜Input＞ ＜Output＞ 200 85℃ 0 0 25 50 75 100 125 Ambient 　temperature　 Ta〔℃〕 150 175 (*1) 5.3 UNIT mW/℃ When used at Ta=25[°C] or above, values of above are reduced per 1[°C]. Power dissipation is the value for mounting 70[mm] x 70[mm] x 1.6[mm] FR4 glass epoxy circuit board (copper foil area is 3% or less). ●Switching Characteristics 20[ns] 20[ns] Description of symbols 90% 50% Input 10% ①tPHL ②tPLH Output 90% 50% 10% (1) tPHL: Time up to 50% of rise time of input waveform ~ 50% of fall time of output waveform (2) tPLH: Time up to 50% of fall time of input waveform ~ 50% of rise time of output waveform (3) tTHL: Time up to 90% ~ 10% of fall time of output waveform (4) tTLH: Time up to 10% ~ 90% of rise time of output waveform ③tTHL ④tTLH 20[ns] 20[ns] 90% 50% Input 10% ①tpLH 90% 50% ②tpHL Description of symbols (1) tPLH: Time up to 50% of rise time of input waveform ~50% of rise time of output waveform (2) tPHL: Time up to 50% of fall time of input waveform ~ 50% of fall time of output waveform (3) tTLH: Time up to 10% ~ 90% of rise time of output waveform (4) tTHL: Time up to 90% ~ 10% of fall time of output waveform Output 10% ③tTLH ④tTHL www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 2/16 2009.06 - Rev.A BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2 ●Electrical Characteristics(BU4S01G2) DC Characteristics (Unless otherwise noted, VSS=0[V],Ta=25[℃]) Standard Value Parameter Symbol MIN TYP MAX 3.5 7.0 Input “H” voltage VIH 11.0 Input “H” current Input “L” current Output “H” voltage IIH IIL VOH 4.95 9.95 14.95 -0.51 -2.1 -1.3 -3.4 0.51 1.3 3.4 Static supply current IDD 1.5 3.0 4.0 0.3 -0.3 0.05 0.05 0.05 0.25 0.5 1.0 μA μA μA V Technical Note Unit V VDD[V] 5 10 15 5 10 15 15 15 5 10 15 5 10 15 5 5 10 15 5 10 15 5 10 15 Condition VOUT=0.5[V] VOUT=1.0[V] VOUT=1.5[V] |IOUT|