BU4S584G2-TL

Datasheet General Purpose CMOS Logic IC Single Schmitt Trigger Inverter Gate BU4S584G2 General Description Key Specifications The BU4S584G2 consist of single schmitt trigger inverter. Also, because a buffer with the inverter is added to the gate output, the I/O transmission characteristic is improved, and a change of the propagation delay time by the increase of the load capacitance is minimized. Features         Supply Voltage Range:  Input Voltage Range:  Operating Temperature Range: Packages Low Power Consumption High Noise Immunity Wide Operating Supply Voltage Range High Input Impedance High Fan Out 2 L-TTL inputs or 1 LS-TTL Input can be directly driven Output is Buffered +3V to +16V VSS to VDD -40°C to +85°C W(Typ) x D(Typ) x H(Max) 2.90mm x 2.80mm x 1.25mm SSOP5 Pin Configurations Pin Descriptions (Top View) VDD 5 1 NC Y 4 2 A Pin No. Symbol I/O Function 1 NC - NC 2 A I Input 3 VSS - Ground 4 Y O Output 5 VDD - Power supply 3 VSS Truth Table INPUT OUTPUT A Y L H H L 〇Product structure : Silicon monolithic integrated circuit .www.rohm.com © 2014 ROHM Co., Ltd. All rights reserved. TSZ22111 • 14 • 001 〇This product has no designed protection against radioactive rays 1/14 TSZ02201-0RDR0GZ00210-1-2 02.Jul.2014 Rev.001 Datasheet BU4S584G2 Absolute Maximum Ratings Parameter Symbol Rating Unit Supply Voltage VDD -0.3 to +18.0 V Input Voltage VIN (VSS-0.3) to (VDD+0.3) V Input Current IIN ±10 mA Operating Temperature Topr -40 to +85 °C Storage Temperature Tstg -55 to +150 °C TJmax +150 °C Maximum Junction Temperature Power Dissipation PD 0.67 (Note 1) W (Note 1)Mounted on 1-layer 70mm x 70mm x 1.6mm glass epoxy board. Reduce 5.4mW per 1°C above 25°C Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. Recommended Operating Conditions Parameter Symbol Rating Unit Supply Voltage VDD +3.0 to +16.0 V Input Voltage VIN VSS to VDD V www.rohm.com © 2014 ROHM Co., Ltd. All rights reserved. TSZ22111 • 15 • 001 2/14 TSZ02201-0RDR0GZ00210-1-2 02.Jul.2014 Rev.001 Datasheet BU4S584G2 Electrical Characteristics (Unless otherwise specified, VSS=0V, TA=25°C) Limits DC Characteristics Parameter Input “H” Voltage VIH Input “L” Voltage VIL Input “H” Current Input “L” Current IIH IIL Output “H” Voltage VOH Output “L” Voltage VOL Output “H” Current IOH Output “L” Current IOL Quiescent Supply Current IDD Parameter Symbol Output Rising Time Switching Characteristics Symbol tTLH Min Typ Max VDD [V] 2.6 3.5 7.0 11.0 2.95 4.95 9.95 14.95 -0.1 -0.51 -2.1 -1.3 -3.4 0.1 0.51 1.3 3.4 - - 0.4 1.5 3.0 4.0 0.3 -0.3 0.05 0.05 0.05 0.05 0.2 0.25 0.5 1.0 3 5 10 15 3 5 10 15 15 15 3 5 10 15 3 5 10 15 3 5 5 10 15 3 5 10 15 3 5 10 15 Limits Min Typ Max - 140 70 35 30 140 70 35 30 230 125 60 50 230 125 60 50 - Output Falling Time tTHL - “L” to ”H” Propagation Delay Time tPLH “H” to ”L” Propagation Delay Time tPHL www.rohm.com © 2014 ROHM Co., Ltd. All rights reserved. TSZ22111 • 15 • 001 Conditions Unit - 3/14 V V μA μA V V mA mA μA Unit ns ns ns ns Figure No. 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 5 - VIH=15V VIL=0V IIOUT|