BU4SU69G2-TR

Datasheet General Purpose CMOS Logic IC Single Inverter Gate BU4SU69G2 General Description Key Specifications The BU4SU69G2 is an un-buffered type single inverter gate. It is suitable for CR, Crystal Oscillator circuit and digital circuit applications.  Supply Voltage Range:  Input Voltage Range:  Operating Temperature Range: +3V to +16V VSS to VDD -40°C to +85°C Features      Low power consumption High noise immunity Wide operating supply voltage range High input impedance Un-buffered output Packages W(Typ) x D(Typ) x H(Max) 2.90mm x 2.80mm x 1.25mm SSOP5 Pin Configurations SSOP5 (Top View) VDD Y 5 4 Pin Descriptions 1 2 3 NC A VSS Pin No. Symbol I/O Function 1 NC - NC 2 A I Input 3 VSS - Ground 4 Y O Output 5 VDD - Power supply Truth Table INPUT OUTPUT A Y L H H L 〇Product structure : Silicon monolithic integrated circuit .www.rohm.com © 2014 ROHM Co., Ltd. All rights reserved. TSZ22111 • 14 • 001 〇This product has no designed protection against radioactive rays 1/12 TSZ02201-0RDR0GZ00180-1-2 30.Sep.2015 Rev.002 BU4SU69G2 Absolute Maximum Ratings (TA=25°C) Parameter Symbol Rating Unit Supply Voltage VDD -0.3 to +18.0 V Input Voltage VIN (VSS -0.3) to (VDD+0.3) V Input Current IIN ±10 mA Operating Temperature Topr -40 to +85 °C Storage Temperature Tstg -55 to +150 °C TJmax +150 °C Maximum Junction Temperature Power Dissipation PD 0.67 (Note 1) W (Note 1) Derate by 5.4mW/°C when operating above TA=25°C (when mounted on ROHM’s standard board). Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. Recommended Operating Conditions (TA=-40°C to +85°C) Parameter Symbol Rating Unit Supply Voltage VDD +3.0 to +16.0 V Input Voltage VIN VSS to VDD V www.rohm.com © 2014 ROHM Co., Ltd. All rights reserved. TSZ22111 • 14 • 001 2/12 TSZ02201-0RDR0GZ00180-1-2 30.Sep.2015 Rev.002 BU4SU69G2 Electrical Characteristics (Unless otherwise specified, VSS=0V, TA=25°C) Parameter Input “H” Voltage DC Characteristics Input “L” Voltage VIH VIL Limits Min Typ Max 4.0 - - 8.0 - - 12 - - Unit Conditions Figure No. VDD [V] 5 VOUT=0.5V 2 10 VOUT=1.0V 3 - 15 VOUT=1.5V 4 - 1.0 5 VOUT=4.5V 2 - - 2.0 10 VOUT=9.0V 3 - - 3.0 15 VOUT=13.5V 4 V V Input “H” Current IIH - - 0.3 μA 15 VIH=15V - Input “L” Current IIL - - -0.3 μA 15 VIL=0V - 4.95 - - Output “H” Voltage Output “L” Voltage Output “H” Current Output “L” Current Quiescent Supply Current Parameter Output Rising Time Switching Characteristics Symbol Output Falling Time “L” to ”H” Propagation Delay Time “H” to ”L” Propagation Delay Time Input Capacitance VOH VOL IOH IOL IDD Symbol tTLH tTHL tPLH tPHL CIN www.rohm.com © 2014 ROHM Co., Ltd. All rights reserved. TSZ22111 • 14 • 001 5 V 9.95 - - 14.95 - - 15 - - 0.05 5 V 10 2 |IOUT|