BU7233SF-E2

Datasheet Comparators Input Full Swing, Open Drain Output Low Supply Current CMOS Comparators BU7230G BU7230SG BU7233F BU7233SF General Description Key Specifications  Operating Supply Voltage: Single Supply Split Supply  Supply Current: BU7230G/BU7230SG BU7233F/BU7233SF  Temperature Range: BU7230G/BU7233F BU7230SG/BU7233SF  Input Offset Current:  Input Bias Current: BU7230G/BU7233F are input full swing and open drain comparators. BU7230SG/BU7233SF have an expanded operating temperature range. These features low operating supply voltage of +1.8V to +5.5V, low supply current and extremely low input bias current. Features       Low Operating Supply Voltage Low Supply Current Input Full Swing Open Drain Output Type Wide Operating Temperature Range Low Input Bias Current Packages +1.8V to +5.5V ±0.9V to ±2.75V 5µA 10µA -40°C to +85°C -40°C to +105°C 1pA (Typ) 1pA (Typ) jW(Typ) x D(Typ) x H(Max) 2.90mm x 2.80mm x 1.25mm 5.00mm x 6.20mm x 1.71mm SSOP5 SOP8 Applications     Battery Monitor Mobile Equipments Limit Comparator Consumer Electronics Pin Configuration BU7230G, BU7230SG: SSOP5 IN- 1 VSS 5 VDD - 2 + IN+ 3 4 OUT Pin No. Pin Name 1 IN- 2 VSS 3 IN+ 4 OUT 5 VDD Pin No. Pin Name 1 OUT1 2 IN1- 3 IN1+ 4 VSS 5 IN2+ 6 IN2- 7 OUT2 8 VDD BU7233F, BU7233SF: SOP8 OUT1 1 IN1- 2 IN1+ 3 8 VDD CH1 - + + 7 OUT2 CH2 + - VSS 4 6 IN25 IN2+ ○Product structure：Silicon monolithic integrated circuit www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･14･001 ○This product has no designed protection against radioactive rays. 1/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Package SSOP5 SOP8 BU7230G BU7230SG BU7233F BU7233SF Ordering Information B U 7 2 3 x Part Number BU7230G BU7230SG BU7233F BU7233SF x x - x x Package G : SSOP5 F : SOP8 Packaging and Forming Specification TR: Embossed Tape and Reel (SSOP5) E2: Embossed Tape and Reel (SOP8) Line-up Topr Channels -40°C to +85°C -40°C to +105°C Package Orderable Part Number 1ch SSOP5 Reel of 3000 BU7230G-TR 2ch SOP8 Reel of 2500 BU7233F-E2 1ch SSOP5 Reel of 3000 BU7230SG-TR 2ch SOP8 Reel of 2500 BU7233SF-E2 Absolute Maximum Ratings (TA=25°C) Parameter Supply Voltage Power Dissipation Symbol Rating BU7230G BU7233F BU7230SG BU7233SF SSOP5 0.54 (Note 1,3) - 0.54 (Note 1,3) - SOP8 - 0.55 (Note 2,3) - 0.55 (Note 2,3) VDD-VSS PD +7 Unit V W Differential Input Voltage (Note 4) VID VDD - VSS V Input Common-mode Voltage Range VICM (VSS-0.3) to (VDD+0.3) V II ±10 mA Vopr +1.8 to +5.5 ±0.9 to ±2.75 V Input Current (Note 5) Operating Supply Voltage Operating Temperature Storage Temperature Maximum Junction Temperature Topr -40 to +85 -40 to +105 °C Tstg -55 to +125 °C TJmax +125 °C (Note 1) (Note 2) (Note 3) (Note 4) To use at temperature above TA=25C reduce 5.4mW/C. To use at temperature above TA=25C reduce 5.5mW/C. Mounted on a FR4 glass epoxy PCB 70mm×70mm×1.6mm (Copper foil area less than 3%). The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input pin voltage is set to more than VSS. (Note 5) An excessive input current will flow when input voltages of more than VDD+0.6V or less than VSS-0.6V are applied. The input current can be set to less than the rated current by adding a limiting resistor. Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 2/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Electrical Characteristics ○BU7230G, BU7230SG（Unless otherwise specified VDD=+3V, VSS=0V, TA=25°C） Limit Temperature Parameter Symbol Range Min Typ Max Unit Conditions Input Offset Voltage (Note 6) VIO 25°C - 1 11 mV - Input Offset Current (Note 6) IIO 25°C - 1 - pA - Input Bias Current (Note 6) IB 25°C - 1 - pA - Supply Current (Note 7) IDD Maximum Output Voltage(High) 25°C - 5 15 Full Range - - 30 VOH 25°C VDD-0.1 - Maximum Output Voltage(Low) VOL 25°C - Large Signal Voltage Gain AV 25°C VICM Common-mode Rejection Ratio Power Supply Rejection Ratio μA RL=∞ - V RL=10kΩ, VRL=3V - VSS+0.1 V RL=10kΩ - 90 - dB RL=10kΩ 25°C 0 - 3 V VSS to VDD CMRR 25°C - 80 - dB - PSRR 25°C - 80 - dB - ISINK 25°C 3 6 - mA OUT=VSS+0.4V tF 25°C - 20 - ns Propagation Delay Time L to H tPLH 25°C - 1.8 - µs Propagation Delay Time H to L tPHL 25°C - 0.6 - µs RL=10kΩ VRL=3V CL=15pF IN-=1.5V 100mV Overdrive Input Common-mode Voltage Range Output Sink Current (Note 8) Output Fall Time (Note 6) Absolute value (Note 7) Full range: BU7230G: TA=-40°C to +85°C BU7230SG: TA=-40°C to +105°C (Note 8) Under the high temperature environment, consider the power dissipation of IC when selecting the output current. When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC. www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 3/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Electrical Characteristics - continued ○BU7233F, BU7233SF（Unless otherwise specified VDD=+3V, VSS=0V, TA=25°C） Limit Temperature Parameter Symbol Range Min Typ Max Unit Conditions Input Offset Voltage (Note 9) VIO 25°C - 1 11 mV - Input Offset Current (Note 9) IIO 25°C - 1 - pA - Input Bias Current (Note 9) IB 25°C - 1 - pA - Supply Current (Note 10) IDD Maximum Output Voltage(High) 25°C - 10 25 Full Range - - 50 VOH 25°C VDD-0.1 - Maximum Output Voltage(Low) VOL 25°C - Large Signal Voltage Gain AV 25°C VICM Common-mode Rejection Ratio Power Supply Rejection Ratio μA RL=∞ All Comparators - V RL=10kΩ, VRL=3V - VSS+0.1 V RL=10kΩ - 90 - dB RL=10kΩ 25°C 0 - 3 V VSS to VDD CMRR 25°C - 80 - dB - PSRR 25°C - 80 - dB - ISINK 25°C 3 6 - mA OUT=VSS+0.4V tF 25°C - 20 - ns Propagation Delay Time L to H tPLH 25°C - 1.8 - µs Propagation Delay Time H to L tPHL 25°C - 0.6 - µs RL=10kΩ VRL=3V CL=15pF IN-=1.5V 100mV Overdrive Input Common-mode Voltage Range Output Sink Current (Note 11) Output Fall Time (Note 9) Absolute value (Note 10) Full range: BU7233F: TA=-40°C to +85°C BU7233SF: TA=-40°C to +105°C (Note 11) Under the high temperature environment, consider the power dissipation of IC when selecting the output current. When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC. www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 4/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F BU7233SF Datasheet Description of Electrical Characteristics Described below are descriptions of the relevant electrical terms used in this datasheet. Items and symbols used are also shown. Note that item name and symbol and their meaning may differ from those on another manufacturer’s document or general document. 1. Absolute Maximum Ratings Absolute maximum rating items indicate the condition which must not be exceeded. Application of voltage in excess of absolute maximum rating or use out of absolute maximum rated temperature environment may cause deterioration of characteristics. (1) Supply Voltage (VDD/VSS) Indicates the maximum voltage that can be applied between the VDD terminal and VSS terminal without deterioration or destruction of characteristics of internal circuit. (2) Differential Input Voltage (VID) Indicates the maximum voltage that can be applied between non-inverting and inverting terminals without damaging the IC. (3) Input Common-mode Voltage Range (VICM) Indicates the maximum voltage that can be applied to the non-inverting and inverting terminals without deterioration or destruction of electrical characteristics. Input common-mode voltage range of the maximum ratings does not assure normal operation of IC. For normal operation, use the IC within the input common-mode voltage range characteristics. (4) Power Dissipation (PD) Indicates the power that can be consumed by the IC when mounted on a specific board at the ambient temperature 25°C (normal temperature). As for package product, PD is determined by the temperature that can be permitted by the IC in the package (maximum junction temperature) and the thermal resistance of the package. 2. Electrical Characteristics (1) Input Offset Voltage (VIO) Indicates the voltage difference between non-inverting terminal and inverting terminals. It can be translated into the input voltage difference required for setting the output voltage at 0 V. (2) Input Offset Current (IIO) Indicates the difference of input bias current between the non-inverting and inverting terminals. (3) Input Bias Current (IB) Indicates the current that flows into or out of the input terminal. It is defined by the average of input bias currents at the non-inverting and inverting terminals. (4) Supply Current (IDD) Indicates the current that flows within the IC under specified no-load conditions. (5) Maximum Output Voltage(High) / Maximum Output Voltage(Low) (VOH/VOL) Indicates the voltage range of the output under specified load condition. It is typically divided into maximum output voltage High and low. Maximum output voltage high indicates the upper limit of output voltage. Maximum output voltage low indicates the lower limit. (6) Large Signal Voltage Gain (AV) Indicates the amplifying rate (gain) of output voltage against the voltage difference between non-inverting terminal and inverting terminal. It is normally the amplifying rate (gain) with reference to DC voltage. Av = (Output voltage) / (Differential input voltage) (7) Input Common-mode Voltage Range (VICM) Indicates the input voltage range where IC normally operates. (8) Common-mode Rejection Ratio (CMRR) Indicates the ratio of fluctuation of input offset voltage when the input common mode voltage is changed. It is normally the fluctuation of DC. CMRR = (Change of input common-mode voltage)/(Input offset fluctuation) (9) Power Supply Rejection Ratio (PSRR) Indicates the ratio of fluctuation of input offset voltage when supply voltage is changed. It is normally the fluctuation of DC. PSRR= (Change of power supply voltage)/(Input offset fluctuation) (10) Output Sink Current (ISINK) The maximum current that can be output from the IC under specific output conditions. The output sink current indicates the current flowing into the IC. (11) Output Fall Time (tF) Indicates the time required for an output voltage step to change from 90% to 10% of its final value. (12) Propagation Delay Time L to H /Propagation Delay Time H to L (tPLH / tPHL) Indicates the time to reach 50% of the output voltage after the step voltage is applied at the input pin. www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 5/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Typical Performance Curves 0.8 0.8 0.6 0.6 Power Dissipation [W] Power Dissipation [W] ○BU7230G, BU7230SG BU7230G 0.4 BU7230SG 0.4 0.2 0.2 0.0 0 25 0.0 85 50 75 100 Ambient Temperature [°C] 105 0 125 Figure 1. Power Dissipation vs Ambient Temperature (Derating Curve) 25 50 75 100 Ambient Temperature [°C] 125 Figure 2. Power Dissipation vs Ambient Temperature (Derating Curve) 12 12 105°C 10 85°C Supply Current [μA] Supply Current [μA] 10 8 25°C 6 -40°C 4 8 5.5V 6 3.0V 4 1.8V 2 2 0 0 1 2 3 4 Supply Voltage [V] 5 6 -50 -25 0 25 50 75 Ambient Temperature [°C] 100 125 Figure 4. Supply Current vs Ambient Temperature Figure 3. Supply Current vs Supply Voltage (*)The above characteristics are measurements of typical sample, they are not guaranteed. BU7230G: -40C to +85C BU7230SG: -40C to +105C www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 6/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Typical Performance Curves - continued ○BU7230G, BU7230SG 6 Maximum Output Voltage (High) [V] Maximum Output Voltage (High) [V] 6 5 4 105°C 85°C 25°C 3 -40°C 2 1 0 4 3.0V 3 1.8V 2 1 0 1 2 3 4 Supply Voltage [V] 5 6 -50 Figure 5. Maximum Output Voltage (High) vs Supply Voltage (RL=10kΩ, VRL=VDD) -25 0 25 50 75 Ambient Temperature [°C] 100 125 Figure 6. Maximum Output Voltage (High) vs Ambient Temperature (RL=10kΩ, VRL=VDD) 30 30 Maximum Output Voltage (Low) [mV] Maximum Output Voltage (Low) [mV] 5.5V 5 25 105°C 85°C 25°C 20 15 -40°C 10 5 2 3 4 Supply Voltage [V] 5 5.5V 20 15 3.0V 1.8V 10 5 0 -50 0 1 25 6 -25 0 25 50 75 Ambient Temperature [°C] 100 125 Figure 8. Maximum Output Voltage (Low) vs Ambient Temperature (RL=10kΩ) Figure 7. Maximum Output Voltage (Low) vs Supply Voltage (RL=10kΩ) (*)The above characteristics are measurements of typical sample, they are not guaranteed. BU7230G: -40C to +85C BU7230SG: -40C to +105C www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 7/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Typical Performance Curves - continued ○BU7230G, BU7230SG 30 30 -40°C 25 Output Sink Current [mA] Output Sink Current [mA] 25 25°C 20 85°C 15 105°C 10 20 15 5.5V 3.0V 10 1.8V 5 5 0 0.0 0.5 1.0 1.5 2.0 Output Voltage [V] 2.5 0 -50 3.0 Figure 9. Output Sink Current vs Output Voltage (VDD=3V) 7.5 5.0 5.0 Input Offset Voltage [mV] 7.5 Input Offset Voltage [mV] 10.0 85°C 105°C 0.0 25°C 0 25 50 75 Ambient Temperature [°C] 100 125 Figure 10. Output Sink Current vs Ambient Temperature (OUT=VSS+0.4V) 10.0 2.5 -25 -40°C -2.5 -5.0 -7.5 2.5 5.5V 0.0 1.8V 3.0V -2.5 -5.0 -7.5 -10.0 -10.0 1 2 3 4 Supply Voltage [V] 5 6 -50 -25 0 25 50 75 Ambient Temperature [°C] 100 125 Figure 12. Input Offset Voltage vs Ambient Temperature (VICM=VDD, EK=-VDD/2) Figure 11. Input Offset Voltage vs Supply Voltage (VICM=VDD, EK=-VDD/2) (*)The above characteristics are measurements of typical sample, they are not guaranteed. BU7230G: -40C to +85C BU7230SG: -40C to +105C www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 8/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Typical Performance Curves - continued ○BU7230G, BU7230SG 160 10.0 Large Signal Voltage Gain [dB] Input Offset Voltage [mV] 7.5 5.0 105°C 2.5 85°C 0.0 25°C -40°C -2.5 -5.0 140 25°C 85°C 120 100 105°C -40°C 80 -7.5 60 -10.0 -1 0 1 2 Input Voltage [V] 3 1 4 3 4 Supply Voltage [V] 5 6 Figure 14. Large Signal Voltage Gain vs Supply Voltage Figure 13. Input Offset Voltage vs Input Voltage (VDD=3V) 120 Common-mode Rejection Ratio [dB] 160 Large Signal Voltage Gain [dB] 2 140 5.5V 3.0V 120 100 1.8V 80 100 85°C 105°C 80 60 -40°C 25°C 40 20 0 60 -50 -25 0 25 50 75 Ambient Temperature [°C] 100 1 125 Figure 15. Large Signal Voltage Gain vs Ambient Temperature 2 3 4 Supply Voltage [V] 5 6 Figure 16. Common-mode Rejection Ratio vs Supply Voltage (*)The above characteristics are measurements of typical sample, they are not guaranteed. BU7230G: -40C to +85C BU7230SG: -40C to +105C www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 9/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Typical Performance Curves - continued ○BU7230G, BU7230SG 120 100 Power Supply Rejection Ratio [dB] Common-mode Rejection Ratio [dB] 120 5.5V 3.0V 80 60 1.8V 40 20 100 80 60 40 20 0 -50 -25 0 25 50 75 Ambient Temperature [°C] 100 0 -50 125 Figure 17. Common-mode Rejection Ratio vs Ambient Temperature 100 125 1.0 Propagation Delay Time H to L [µs] Propagation Delay Time L to H [µs] 0 25 50 75 Ambient Temperature [°C] Figure 18. Power Supply Rejection Ratio vs Ambient Temperature 2.5 2.0 5.5V 1.5 3.0V 1.0 1.8V 0.5 0.0 -50 -25 0.8 3.0V 1.8V 0.6 5.5V 0.4 0.2 0.0 -25 0 25 50 75 Ambient Temperature [°C] 100 125 -50 Figure 19. Propagation Delay Time L to H vs Ambient Temperature (RL=10kΩ, VRL=3V, CL=15pF IN-=1.5V, 100mV Overdrive) -25 0 25 50 75 Ambient Temperature [°C] 100 125 Figure 20. Propagation Delay Time H to L vs Ambient Temperature (RL=10kΩ, VRL=3V, CL=15pF IN-=1.5V, 100mV Overdrive) (*)The above characteristics are measurements of typical sample, they are not guaranteed. BU7230G: -40C to +85C BU7230SG: -40C to +105C www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 10/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Typical Performance Curves - continued 0.8 0.8 0.6 0.6 Power Dissipation [W] Power Dissipation [W] ○BU7233F, BU7233SF BU7233F 0.4 0.2 BU7233SF 0.4 0.2 0.0 0 25 0.0 85 50 75 100 Ambient Temperature [°C] 125 105 0 Figure 21. Power Dissipation vs Ambient Temperature (Derating Curve) 25 50 75 100 Ambient Temperature [°C] 125 Figure 22. Power Dissipation vs Ambient Temperature (Derating Curve) 20 20 105°C 16 Supply Current [μA] Supply Current [μA] 16 85°C 12 25°C 8 -40°C 5.5V 12 3.0V 8 1.8V 4 4 0 0 1 2 3 4 Supply Voltage [V] 5 6 -50 -25 0 25 50 75 Ambient Temperature [°C] 100 125 Figure 24. Supply Current vs Ambient Temperature Figure 23. Supply Current vs Supply Voltage (*)The above characteristics are measurements of typical sample, they are not guaranteed. BU7233F: -40C to +85C BU7233SF: -40C to +105C www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 11/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Typical Performance Curves - continued ○BU7233F, BU7233SF 6 Maximum Output Voltage (High) [V] Maximum Output Voltage (High) [V] 6 5 4 105°C 85°C 25°C 3 -40°C 2 1 4 3.0V 3 1.8V 2 1 0 0 1 2 3 4 Supply Voltage [V] 5 6 -50 Figure 25. Maximum Output Voltage (High) vs Supply Voltage (RL=10kΩ, VRL=VDD) -25 0 25 50 75 Ambient Temperature [°C] 100 125 Figure 26. Maximum Output Voltage (High) vs Ambient Temperature (RL=10kΩ, VRL=VDD) 30 Maximum Output Voltage (Low) [mV] 30 Maximum Output Voltage (Low) [mV] 5.5V 5 25 105°C 85°C 25°C 20 15 -40°C 10 5 25 5.5V 20 15 3.0V 1.8V 10 0 -50 0 1 2 3 4 Supply Voltage [V] 5 5 6 -25 0 25 50 75 Ambient Temperature [°C] 100 125 Figure 28. Maximum Output Voltage (Low) vs Ambient Temperature (RL=10kΩ) Figure 27. Maximum Output Voltage (Low) vs Supply Voltage (RL=10kΩ) (*)The above characteristics are measurements of typical sample, they are not guaranteed. BU7233F: -40C to +85C BU7233SF: -40C to +105C www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 12/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Typical Performance Curves - continued ○BU7233F, BU7233SF 30 30 -40°C 25 Output Sink Current [mA] Output Sink Current [mA] 25 25°C 20 85°C 15 105°C 10 20 15 5.5V 3.0V 10 1.8V 5 5 0 0.0 0.5 1.0 1.5 2.0 Output Voltage [V] 2.5 0 -50 3.0 Figure 29. Output Sink Current vs Output Voltage (VDD=3V) 7.5 5.0 5.0 Input Offset Voltage [mV] 7.5 Input Offset Voltage [mV] 10.0 85°C 105°C 0.0 25°C 0 25 50 75 Ambient Temperature [°C] 100 125 Figure 30. Output Sink Current vs Ambient Temperature (OUT=VSS+0.4V) 10.0 2.5 -25 -40°C -2.5 -5.0 -7.5 2.5 5.5V 0.0 1.8V 3.0V -2.5 -5.0 -7.5 -10.0 -10.0 1 2 3 4 Supply Voltage [V] 5 6 -50 -25 0 25 50 75 Ambient Temperature [°C] 100 125 Figure 32. Input Offset Voltage vs Ambient Temperature (VICM=VDD, EK=-VDD/2) Figure 31. Input Offset Voltage vs Supply Voltage (VICM=VDD, EK=-VDD/2) (*)The above characteristics are measurements of typical sample, they are not guaranteed. BU7233F: -40C to +85C BU7233SF: -40C to +105C www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 13/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Typical Performance Curves - continued ○BU7233F, BU7233SF 160 10.0 Large Signal Voltage Gain [dB] Input Offset Voltage [mV] 7.5 5.0 -40°C 2.5 25°C 0.0 105°C 85°C -2.5 -5.0 140 85°C 105°C 120 100 -40°C 25°C 80 -7.5 60 -10.0 -1 0 1 2 Input Voltage [V] 3 1 4 2 3 4 Supply Voltage [V] 5 6 Figure 34. Large Signal Voltage Gain vs Supply Voltage Figure 33. Input Offset Voltage vs Input Voltage (VDD=3V) 160 120 25°C Common-mode Rejection Ratio [dB] Large Signal Voltage Gain [dB] -40°C 140 5.5V 120 3.0V 100 1.8V 80 100 80 85°C 105°C 60 40 20 0 60 -50 -25 0 25 50 75 Ambient Temperature [°C] 100 1 125 Figure 35. Large Signal Voltage Gain vs Ambient Temperature 2 3 4 Supply Voltage [V] 5 6 Figure 36. Common-mode Rejection Ratio vs Supply Voltage (*)The above characteristics are measurements of typical sample, they are not guaranteed. BU7233F: -40C to +85C BU7233SF: -40C to +105C www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 14/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Typical Performance Curves - continued ○BU7233F, BU7233SF 120 120 5.5V Power Supply Rejection Ratio [dB] Common-mode Rejection Ratio [dB] 3.0V 100 80 1.8V 60 40 20 100 80 60 40 20 0 -50 -25 0 25 50 75 Ambient Temperature [°C] 100 0 -50 125 Figure 37. Common-mode Rejection Ratio vs Ambient Temperature -25 0 25 50 75 Ambient Temperature [°C] 100 125 Figure 38. Power Supply Rejection Ratio vs Ambient Temperature 1.0 4.5 Propagation Delay Time H to L [µs] Propagation Delay Time L to H [µs] 4.0 3.5 5.5V 3.0 2.5 3.0V 2.0 1.5 1.8V 1.0 0.8 3.0V 1.8V 0.6 5.5V 0.4 0.2 0.5 0.0 -50 0.0 -25 0 25 50 75 Ambient Temperature [°C] 100 125 -50 Figure 39. Propagation Delay Time L to H vs Ambient Temperature (RL=10kΩ, VRL=3V, CL=15pF IN-=1.5V, 100mV Overdrive) -25 0 25 50 75 Ambient Temperature [°C] 100 125 Figure 40. Propagation Delay Time H to L vs Ambient Temperature (RL=10kΩ, VRL=3V, CL=15pF IN-=1.5V, 100mV Overdrive) (*)The above characteristics are measurements of typical sample, they are not guaranteed. BU7233F: -40C to +85C BU7233SF: -40C to +105C www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 15/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Application Information NULL Method Conditions for Test Circuit1 VDD, VSS, EK, VICM Unit:V Parameter Input Offset Voltage VF SW1 SW2 SW3 VDD VSS EK VICM Calculation VF1 ON ON OFF 3 0 -0.1 0.3 1 ON ON ON 3 0 0.3 2 ON ON OFF 3 0 -0.1 ON ON OFF 0 -0.1 VF2 Large Signal Voltage Gain VF3 VF4 Common-mode Rejection Ratio (Input Common-mode Voltage Range) VF5 VF6 Power Supply Rejection Ratio VF7 1.8 5.5 - Calculation 1. Input Offset Voltage (VIO) VIO = 2. Large Signal Voltage Gain (AV) Av = 20Log 3. Common-mode Rejection Ratio (CMRR) CMRR = 20Log VICM × (1+RF/RS) |VF5 - VF4| PSRR = 20Log VDD × (1+ RF/RS) |VF7 - VF6| 4. Power Supply Rejection Ratio (PSRR) |VF1| 1 + RF/RS -0.3 -2.7 0 3 3 0.3 4 [V] EK × (1+RF/RS) |VF3 - VF2| [dB] [dB] [dB] 0.47μF RF=50kΩ SW1 RS=50Ω 500kΩ VDD 15V EK RI=1MΩ 0.01μF Vo 500kΩ 0.1μF 0.1μF DUT SW3 RS=50Ω RI=1MΩ NULL RL VICM 50kΩ SW2 VRL VSS V VF -15V Figure 41. Test Circuit 1(One channel only) www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 16/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Application Information - continued Switch Conditions for Test Circuit 2 SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 Supply Current OFF ON ON OFF OFF OFF OFF OFF Maximum Output Voltage (RL=10kΩ) OFF ON ON ON OFF OFF ON OFF Output Current OFF OFF OFF OFF OFF ON OFF OFF Response Time ON OFF ON ON ON OFF OFF ON SW No. VDD ＋ SW1 SW2 － SW4 SW3 SW5 SW6 SW7 SW8 VIN VSS RL CL IN+ IN- VRL OUT Figure 42. Test Circuit 2 (One channel only) Input Voltage Input Voltage 1.6V 1.6V 100mV Overdrive Vre 1.5V 1.5V 100mV Overdrive 1.4V 1.4V t t Input Wave Input Wave Output Voltage Output Voltage tPLH tF 3V 3V 1.5V 50% 90% 50% 1.5V 10% 0V 0V tPHL Output Wave t Output Wave t Figure 43. Response Time Input and Output Wave www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111･15･001 17/24 TSZ02201-0RFR1G200440-1-2 25.Dec.2013 Rev.002 BU7230G BU7230SG BU7233F Datasheet BU7233SF Power Dissipation Power dissipation (total loss) indicates the power that the IC can consume at TA=25°C (normal temperature). As the IC consumes power, it heats up, causing its temperature to be higher than the ambient temperature. The allowable temperature that the IC can accept is limited. This depends on the circuit configuration, manufacturing process, and consumable power. Power dissipation is determined by the allowable temperature within the IC (maximum junction temperature) and the thermal resistance of the package used (heat dissipation capability). Maximum junction temperature is typically equal to the maximum storage temperature. The heat generated through the consumption of power by the IC radiates from the mold resin or lead frame of the package. Thermal resistance, represented by the symbol θJA°C/W, indicates this heat dissipation capability. Similarly, the temperature of an IC inside its package can be estimated by thermal resistance. Figure 44(a) shows the model of the thermal resistance of the package. The equation below shows how to compute for the thermal resistance (θJA), given the ambient temperature (TA), maximum junction temperature (TJmax), and power dissipation (PD). θJA = (TJmax-TA) / PD °C/W The derating curve in Figure 44(b) indicates the power that the IC can consume with reference to ambient temperature. Power consumption of the IC begins to attenuate at certain temperatures. This gradient is determined by Thermal resistance (θJA), which depends on the chip size, power consumption, package, ambient temperature, package condition, wind velocity, etc. This may also vary even when the same of package is used. Thermal reduction curve indicates a reference value measured at a specified condition. Figure 44(c) to (f) shows the derating curve for BU7230G, BU7230SG, BU7233F and BU7233SF. Power Dissipation of LSI [W] PDmax θJA=(TJmax-TA)/PD C/W Power Dissipation of IC P2 Ambient Temperature TA[ C ] θJA2