Product No.Configuration LED
●Product No.Configuration
〈Chip LEDs〉
[SML series/SCM series]
■Exclude Mono-color (Blue (B), Green (E), White (WB) and RGB),2 color BU(Blue/Red)
S
M
L
-
Series name
D
1
Package shape
2
V
Type of Element
8
W
Color
T
Resin color
8
6
Packaging type
Brightness rank
Special control symbol
Chip control symbol
Remarks
T86
Refer to
specification
Cathode at sproket hole side
(the top)
SML chip LED series
P1
1.0x0.6 t=0.2mm
0
V
Red
T
Transparent
colorless
U
Red
W
Milky white
U2
Red
B
Black
D
Orange
Y3
Yellow
Y
Yellow
Yellow
Low current
E1
1.6x0.8 t=0.36mm
1
High brightness
type
D1/D2
1.6x0.8 t=0.55mm
2
H1
2.0x1.25 t=0.8mm
3
M1
2.0x1.25 t=0.8mm
4
01/02
3.0x2.0 t=1.3mm
5
Z1
3.5x2.8 t=1.9mm
W
A1
1.6x1.15 t=0.55mm
Y2
Yellow
81/82
3.4x1.25 t=1.1mm
M2
Yellow green
S1
3.2x1.6 t=1.85mm
M
Yellow green
P2
1.0x1.0 t=0.2mm
F
Green
52
1.5x1.3 t=0.6mm
P
Green
MV
Yellow green/Red
SCM chip LED series
01
Ultra high
brightness type
3.5x1.5 t=2.2mm
MU
Yellow green/Red
MD
Yellow green/Orange
MY
Yellow green/Yellow
YV
Yellow/Red
R
Infrared
T
Phototransistor
T86
Cathode at sproket hole side
(the back)
T68
Cathode at sproket hole side
(the top)
[SML series/SCM series]
■Mono-color (Blue (B), Green (E), White (WB) and RGB),2 color BU(Blue/Red)
Chromaticity rank
(for SMZ24E2/white/RGB LED) or Wavelength rank
(SMLD12E2/D12E3 only)
S
M
L
E
Series name
N
3
W
Package shape
B
C
8
W
Remarks
Color
Special control symbol
1
Resin color
Packaging type
Chip control symbol
Brightness rank
T86
Cathode at sproket hole side
(the top)
Refer to
specification
Resin color
E
Green
T
Transparent
Colorless
3
E2/E3
Blue Green
W
Milky white
4
B
Blue
WB
White
BU
Blue/Red
RGB
Red/Green/Blue
SML chip LED series
P1
1.0x0.6 t=0.2mm
2
SCM chip LED series
EN
1.6x0.8 t=0.36mm
D1
1.6x0.8 t=0.55mm
MN
2.0x1.25 t=0.8mm
6
Z2/ZN
3.5x2.8 t=1.9mm
8
A1
1.6x1.15 t=0.55mm
81
3.4x1.25 t=1.1mm
S1
3.2x1.6 t=1.85mm
52
1.5x1.3 t=0.6mm
P34
1.0x1.0 t=0.2mm
P36
1.5x1.0 t=0.2mm
VN
3.5x2.8 t=0.6mm
01
3.0x2.0 t=1.3mm
K1/K2
4.5x2.0 t=0.6mm
High brightness
type
Ultra high
brightness type
Cathode at sproket hole side (the top)
3
Cathode at sproket hole side
(the top 2mm pitch)
< case of S1 series>
Resin
U
Silicone
W
Epoxy
T86
Cathode at sproket hole side
(the back)
T68
Cathode at sproket hole side
(the top)
(in case of VN6 series)
< case of 81 series>
T86
www.rohm.com
©2022 ROHM Co., Ltd. All rights reserved
1
1/3
Cathode at sproket hole side
(the back)
ロ
2022.9 - Rev.001
Product No.Configuration LED
●Product No.Configuration
〈Chip LEDs〉
[CSL series]
C
S
L
0
Series name
7
Package shape
0
1
Chip control symbol
D
T
Color
Resin color
5
Packaging type
Chromaticity rank (for white LED)
Remarks
CSL
chip LED
series
Brightness rank
Special control
symbol
04
2.8x1.2 t=0.8mm
V
Red
T
Transparent
colorless
1
Cathode at sproket hole side
(the top)
07
2.9x2.4 t=3.1mm
U
Red
W
Milky white
5
Cathode at sproket
hole side (big reel)
09
1.6x0.8 t=1.24mm
D
Orange
10
1.6x0.8 t=1.24mm
Y
Yellow
11
1.6x0.8 t=0.55mm
W
Yellow
12
1.6x0.8 t=1.24mm
M
Yellow green
13
1.6x0.8 t=1.06mm
P
Green
15
1.0x0.5 t=0.55mm
E
Green
19
1.6x0.8 t=0.55mm
B
Blue
WB
White
R
IR
Refer to
specification
[MSL series]
Chromaticity rank (for RGB LED)
*MSL0601RGBU is not applied./Refer to specification
M
S
L
0
Series name
1
Package shape
0
4
Chip control symbol
R
G
B
U
Remarks
Color
Resin color
Special control symbol
1
Packaging type
Brightness rank
Refer to
specification
MSL
chip LED
series
01
6.9x2.2 t=2.15mm
04
1.8x1.6 t=0.5mm
06
2.9x1.35 t=1.0mm
RGB
Red/Green/Blue
U
Silicone
W
Epoxy
1
www.rohm.com
©2022 ROHM Co., Ltd. All rights reserved
2/3
Cathode at sproket hole side
(the top)
ロ
2022.9 - Rev.001
Product No.Configuration LED
●Product No.Configuration
〈Through-hole LEDs
■Exclude Mono-color (Blue (B), Green (E), White (WB))
S
L
I
-
3
4
Series name
3
V
Package shape
R
8
Color
3
Resin color
Chip control symbol
SLA
C
F
Packaging type
Brightness rank
Special control symbol
Remarks
1-Die Circular type High
Brightness
LED Lamps
343
ϕ3 Circular type
V
Red
R
Diffused colored
3F
332
ϕ3 Circular type
U
Red
U
Diffused colored
T31
1-Die Circular type Low Current
High
Brightness LED Lamps
56
ϕ5 Circular type
U2
Red
Y Diffused colored
560
ϕ5 Circular type
D
Orange
570
ϕ5 Circular type
Y
Yellow
580
ϕ5 Circular type
Y2
Yellow
C
430
Oval type ϕ4
M
Yellow green
T
325
ϕ3.2 Circular type
P
Green
322
ϕ3 Flat disc type
Refer to
specification
1-Die straight bulk
Refer to taping specifi cation
SLI
G
SLR
T32
Diffused colored
1-Die Circular type LED Lamp
Transparent colored
Transparent colorless
■Mono-color (Blue (B), Green (E), White (WB))
Chromaticity rank (for white LED)
*SLA560WBD2PT is not applied.
S
L
R
Series name
3
4
3
W
Package shape
B
N
P
2
Color
SLR
1-Die Circular type High
Brightness LED Lamps
1-Die Circular type LED
Lamps
2
Resin color
Chip control symbol
SLA
T
Packaging type
Brightness rank
Remarks
Special control symbol
343
ϕ3 Circular type
BN
Blue
T
Transparent colorless
3F
560
ϕ5 Circular type
EN
Green
W
Milky white
T31
580
ϕ5 Circular type
WBN
White
Refer to
specification
1-Die straight bulk
Refer to taping specifi cation
T32
〈in case of white〉
3
1
2
www.rohm.com
©2022 ROHM Co., Ltd. All rights reserved
3/3
1-Die straight bulk
Refer to taping specifi cation
(same as T31)
Refer to specifi cation
(same as T32)
ロ
2022.9 - Rev.001
Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifications.
3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensure the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1107 A
Datasheet
General Precaution
1. Before you use our Products, you are requested to carefully read this document and fully understand its contents.
ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any
ROHM’s Products against warning, caution or note contained in this document.
2. All information contained in this document is current as of the issuing date and subject to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales
representative.
3.
The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all
information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or
liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccuracy or errors of or
concerning such information.
Notice – WE
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.001