CSL0901YT1C

Product No.Configuration　LED ●Product No.Configuration 〈Chip LEDs〉 [SML series/SCM series] ■Exclude Mono-color (Blue (B), Green (E), White (WB) and RGB),2 color BU(Blue/Red) S M L - Series name D 1 Package shape 2 V Type of Element 8 W Color T Resin color 8 6 Packaging type Brightness rank Special control symbol Chip control symbol Remarks T86 Refer to specification Cathode at sproket hole side (the top) SML chip LED series P1 1.0x0.6 t=0.2mm 0 V Red T Transparent colorless U Red W Milky white U2 Red Ｂ Black D Orange Y3 Yellow Y Yellow Yellow Low current E1 1.6x0.8 t=0.36mm 1 High brightness type D1/D2 1.6x0.8 t=0.55mm 2 H1 2.0x1.25 t=0.8mm 3 M1 2.0x1.25 t=0.8mm 4 01/02 3.0x2.0 t=1.3mm 5 Z1 3.5x2.8 t=1.9mm W A1 1.6x1.15 t=0.55mm Y2 Yellow 81/82 3.4x1.25 t=1.1mm M2 Yellow green S1 3.2x1.6 t=1.85mm M Yellow green P2 1.0x1.0 t=0.2mm F Green 52 1.5x1.3 t=0.6mm P Green MV Yellow green/Red SCM chip LED series 01 Ultra high brightness type 3.5x1.5 t=2.2mm MU Yellow green/Red MD Yellow green/Orange MY Yellow green/Yellow YV Yellow/Red R Infrared T Phototransistor T86 Cathode at sproket hole side (the back) T68 Cathode at sproket hole side (the top) [SML series/SCM series] ■Mono-color (Blue (B), Green (E), White (WB) and RGB),2 color BU(Blue/Red) Chromaticity rank (for SMZ24E2/white/RGB LED) or Wavelength rank (SMLD12E2/D12E3 only) S M L E Series name N 3 Ｗ Package shape Ｂ Ｃ 8 W Remarks Color Special control symbol 1 Resin color Packaging type Chip control symbol Brightness rank T86 Cathode at sproket hole side (the top) Refer to specification Resin color E Green T Transparent Colorless 3 E2/E3 Blue Green W Milky white 4 B Blue WB White BU Blue/Red RGB Red/Green/Blue SML chip LED series P1 1.0x0.6 t=0.2mm 2 SCM chip LED series EN 1.6x0.8 t=0.36mm D1 1.6x0.8 t=0.55mm MN 2.0x1.25 t=0.8mm 6 Z2/ZN 3.5x2.8 t=1.9mm 8 A1 1.6x1.15 t=0.55mm 81 3.4x1.25 t=1.1mm S1 3.2x1.6 t=1.85mm 52 1.5x1.3 t=0.6mm P34 1.0x1.0 t=0.2mm P36 1.5x1.0 t=0.2mm VN 3.5x2.8 t=0.6mm 01 3.0x2.0 t=1.3mm K1/K2 4.5x2.0 t=0.6mm High brightness type Ultra high brightness type Cathode at sproket hole side (the top) 3 Cathode at sproket hole side (the top 2mm pitch) < case of S1 series> Resin U Silicone W Epoxy T86 Cathode at sproket hole side (the back) T68 Cathode at sproket hole side (the top) (in case of VN6 series) < case of 81 series> T86 www.rohm.com ©2022 ROHM Co., Ltd. All rights reserved 1 1/3 Cathode at sproket hole side (the back) ロ 2022.9 - Rev.001 Product No.Configuration　LED ●Product No.Configuration 〈Chip LEDs〉 [CSL series] Ｃ Ｓ L 0 Series name 7 Package shape 0 1 Chip control symbol Ｄ Ｔ Color Resin color 5 Packaging type Chromaticity rank (for white LED) Remarks CSL chip LED series Brightness rank Special control symbol 04 2.8x1.2 t=0.8mm V Red T Transparent colorless 1 Cathode at sproket hole side (the top) 07 2.9x2.4 t=3.1mm U Red W Milky white 5 Cathode at sproket hole side (big reel) 09 1.6x0.8 t=1.24mm D Orange 10 1.6x0.8 t=1.24mm Y Yellow 11 1.6x0.8 t=0.55mm W Yellow 12 1.6x0.8 t=1.24mm M Yellow green 13 1.6x0.8 t=1.06mm P Green 15 1.0x0.5 t=0.55mm E Green 19 1.6x0.8 t=0.55mm B Blue WB White R IR Refer to specification [MSL series] Chromaticity rank (for RGB LED) *MSL0601RGBU is not applied./Refer to specification Ｍ Ｓ L 0 Series name 1 Package shape 0 4 Chip control symbol Ｒ Ｇ Ｂ U Remarks Color Resin color Special control symbol 1 Packaging type Brightness rank Refer to specification MSL chip LED series 01 6.9x2.2 t=2.15mm 04 1.8x1.6 t=0.5mm 06 2.9x1.35 t=1.0mm RGB Red/Green/Blue U Silicone W Epoxy 1 www.rohm.com ©2022 ROHM Co., Ltd. All rights reserved 2/3 Cathode at sproket hole side (the top) ロ 2022.9 - Rev.001 Product No.Configuration　LED ●Product No.Configuration 〈Through-hole LEDs ■Exclude Mono-color (Blue (B), Green (E), White (WB)) S Ｌ I - 3 4 Series name 3 V Package shape Ｒ 8 Color 3 Resin color Chip control symbol SLA Ｃ Ｆ Packaging type Brightness rank Special control symbol Remarks 1-Die Circular type High Brightness LED Lamps 343 ϕ3 Circular type V Red Ｒ Diffused colored 3F 332 ϕ3 Circular type U Red U Diffused colored T31 1-Die Circular type Low Current High Brightness LED Lamps 56 ϕ5 Circular type U2 Red Y Diffused colored 560 ϕ5 Circular type D Orange 570 ϕ5 Circular type Y Yellow 580 ϕ5 Circular type Y2 Yellow C 430 Oval type ϕ4 M Yellow green T 325 ϕ3.2 Circular type P Green 322 ϕ3 Flat disc type Refer to specification 1-Die straight bulk Refer to taping specifi cation SLI G SLR T32 Diffused colored 1-Die Circular type LED Lamp Transparent colored Transparent colorless ■Mono-color (Blue (B), Green (E), White (WB)) Chromaticity rank (for white LED) *SLA560WBD2PT is not applied. S Ｌ R Series name 3 4 3 Ｗ Package shape Ｂ Ｎ Ｐ 2 Color SLR 1-Die Circular type High Brightness LED Lamps 1-Die Circular type LED Lamps 2 Resin color Chip control symbol SLA Ｔ Packaging type Brightness rank Remarks Special control symbol 343 ϕ3 Circular type BN Blue T Transparent colorless 3F 560 ϕ5 Circular type EN Green W Milky white T31 580 ϕ5 Circular type WBN White Refer to specification 1-Die straight bulk Refer to taping specifi cation T32 〈in case of white〉 3 1 2 www.rohm.com ©2022 ROHM Co., Ltd. All rights reserved 3/3 1-Die straight bulk Refer to taping specifi cation (same as T31) Refer to specifi cation (same as T32) ロ 2022.9 - Rev.001 Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications. 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensure the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. R1107 A Datasheet General Precaution 1. Before you use our Products, you are requested to carefully read this document and fully understand its contents. ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any ROHM’s Products against warning, caution or note contained in this document. 2. All information contained in this document is current as of the issuing date and subject to change without any prior notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales representative. 3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccuracy or errors of or concerning such information. Notice – WE © 2015 ROHM Co., Ltd. All rights reserved. Rev.001