DTB713ZETL

DTB713ZM DTB713Z series PNP -200mA -30V Digital Transistors Datasheet (Bias Resistor Built-in Transistors) lOutline Parameter Value VCC -30V -200mA 1.0kW 10kW IC(MAX.) R1 R2 VMT3 EMT3 OUT OUT IN GND IN GND DTB713ZM (SC-105AA) lFeatures DTB713ZE SOT-416 (SC-75A) lInner circuit 1) Built-In Biasing Resistors 2) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see inner circuit). 3) The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of completely eliminating parasitic effects. 4) Only the on/off conditions need to be set for operation, making the circuit design easy. 5) Complementary NPN Types :DTD713Z series 6) Lead Free/RoHS Compliant. lApplication Switching circuit, Inverter circuit, Interface circuit, Driver circuit lPackaging specifications Package Package size (mm) Taping code DTB713ZM VMT3 1212 T2L 180 8 8,000 P11 DTB713ZE EMT3 1616 TL 180 8 3,000 P11 Part No. www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 1/6 Basic Reel size Tape width ordering (mm) (mm) unit (pcs) Marking 2012.11 - Rev.C Data Sheet DTB713Z series lAbsolute maximum ratings (Ta = 25°C) Parameter Symbol Values Unit Supply voltage VCC -30 V Input voltage VIN -10 to +5 V Collector current IC(MAX.)*1 -200 mA Power dissipation PD *2 150 mW Tj 150 °C Tstg -55 to +150 °C Junction temperature Range of storage temperature lElectrical characteristics(Ta = 25°C) Parameter Input voltage Output voltage Input current Output current Symbol Conditions Min. Typ. Max. Unit VI(off) VCC = -5V, IO = -100mA - - -0.3 VI(on) VO = -0.3V, IO = -20mA -2.5 - - VO(on) IO / II = -50mA / -2.5mA - -0.07 -0.3 V VI = -5V - - -6.4 mA VCC = -30V, VI = 0V - - -0.5 mA 140 - - - II IO(off) VO = -2V, IO = -100mA V DC current gain GI Input resistance R1 - 0.7 1.0 1.3 kW Resistance ratio R2/R1 - 8 10 12 - - 260 - MHz Transition frequency fT *1 VCE = -10V, IE = 5mA, f = 100MHz *1 Characteristics of built-in transistor *2 Each terminal mounted on a reference footprint www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 2/6 2012.11 - Rev.C Data Sheet DTB713Z series lElectrical characteristic curves(Ta = 25°C) Fig.2 Output current vs. input voltage (OFF characteristics) Fig.1 Input voltage vs. output current (ON characteristics) -100 -100 VCC= -5V -10 OUTPUT CURRENT : IO [mA] INPUT VOLTAGE : VI(on) [V] VO= -0.3V Ta= -40ºC 25ºC 85ºC 125ºC -1 -0.1 -0.1 -10 -1 Ta= 125ºC 85ºC 25ºC -40ºC -0.1 -1 -10 -100 -1000 -0 OUTPUT CURRENT : IO [mA] -1.0mA -0.9mA -0.7mA -0.6mA -0.5mA -100 -0.4mA -0.3mA -50 -0.2mA -0.1mA 0A 0 0 -2 -4 -6 -8 -10 VO= -2V Ta= 125ºC 85ºC 25ºC -40ºC 100 10 1 -0.1 -1 -10 -100 -1000 OUTPUT CURRENT : IO [mA] OUTPUT VOLTAGE : VO [V] www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. DC CURRENT GAIN : GI OUTPUT CURRENT : IO [mA] 1000 -0.8mA -150 -1.5 Fig.4 DC current gain vs. output current II= Ta=25ºC -1 INPUT VOLTAGE : VI(off)[V] Fig.3 Output current vs. output voltage -200 -0.5 3/6 2012.11 - Rev.C Data Sheet DTB713Z series lElectrical characteristic curves(Ta = 25°C) Fig.5 Output voltage vs. output current -1 OUTPUT VOLTAGE : VO(on) [V] IC/II=20 Ta= 125ºC 85ºC 25ºC -40ºC -0.1 -0.01 -1 -10 -100 -1000 OUTPUT CURRENT : IO [mA] www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 4/6 2012.11 - Rev.C Data Sheet DTB713Z series lDimensions (Unit : mm) D VMT3 c A e b Lp HE E L b1 x S A A1 l1 A e1 l1 b3 S e b2 Pattern of terminal position areas [Not a recommended pattern of soldering pads] DIM A A1 b b1 c D E e HE L Lp x DIM b2 b3 e1 l1 MILIMETERS MIN MAX 0.45 0.55 0.00 0.10 0.17 0.27 0.27 0.37 0.08 0.18 1.10 1.30 0.70 0.90 0.40 1.10 1.30 0.10 0.30 0.20 0.40 0.10 INCHES MIN 0.018 0.000 0.007 0.011 0.003 0.043 0.028 MAX 0.022 0.004 0.011 0.015 0.007 0.051 0.035 0.02 0.043 0.004 0.008 - MILIMETERS MIN MAX 0.37 0.47 0.80 0.50 0.051 0.012 0.016 0.004 INCHES MIN - MAX 0.015 0.019 0.031 - 0.020 Dimension in mm / inches www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 5/6 2012.11 - Rev.C Data Sheet DTB713Z series lDimensions (Unit : mm) D A EMT3 b1 c Lp L1 HE E Q e b A3 x S A A1 l1 A e1 l1 b3 S e b2 Pattern of terminal position areas [Not a recommended pattern of soldering pads] DIM A A1 A3 b b1 c D E e HE L1 Lp Q x DIM b2 b3 e1 l1 MILIMETERS MIN MAX 0.60 0.80 0.00 0.10 0.25 0.15 0.30 0.25 0.40 0.10 0.20 1.50 1.70 0.70 0.90 0.50 1.40 1.80 0.10 0.15 0.05 0.25 0.10 INCHES MIN 0.024 0.000 MAX 0.031 0.004 0.010 0.006 0.010 0.004 0.059 0.028 0.012 0.016 0.008 0.067 0.035 0.020 0.055 0.004 0.006 0.002 - MILIMETERS MIN MAX 0.40 0.50 1.10 0.70 0.071 0.010 0.004 INCHES MIN - MAX 0.016 0.020 0.043 - 0.028 Dimension in mm / inches www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 6/6 2012.11 - Rev.C Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. R1102A