EDZ8.2B_1

EDZ8.2B Diodes Zener diode EDZ8.2B Applications Constant voltage control External dimensions (Unit : mm) 0.8±0.05 0.12±0.05 Land size figure (Unit : mm) 0.8 0.6 Features 1) 2-pin ultra mini-mold type for high-density mounting (EMD2). 2) High reliability. 3) Can be mounted automatically, using chip mounter. 0.3±0.05 1.2±0.05 1.6±0.1 Ｅ MD2 Structure Construction Silicon epitaxial planar 0.6±0.1 R OHM : EMD2 JEDEC :SOD-523 JEITA : SC-79 Mark EX. EDZ3.6B Taping specifications (Unit : mm) 0.2±0.05 4.0±0.1 2.0±0.05 φ1.5±0.05 3.5±0.05 1.75±0.1 8.0±0.15 1.3±0.06 0 1.26±0.05 0 0.2 0.76±0.05 2.45±0.1 φ0.5 0.95±0.06 0 空ポケット ket 4.0±0.1 Empty poc 2.0±0.05 Absolute maximum ratings (Ta=25°C) Parameter Power dissipation Junction temperature Storage temperature Operating temperature Symbol P Tj Tstg Topr Limits 150 150 -55 to +150 -55 to +150 Unit mW ℃ ℃ ℃ 0.6 Rev.C 1.7 1/4 EDZ8.2B Diodes Electrical characteristics (Ta=25°C) Symbol TYP. EDZ 3.6B EDZ 3.9B EDZ 4.3B EDZ 4.7B EDZ 5.1B EDZ 5.6B EDZ 6.2B EDZ 6.8B EDZ 7.5B EDZ 8.2B EDZ 9.1B EDZ 10B EDZ 11B EDZ 12B EDZ 13B EDZ 15B EDZ 16B EDZ 18B EDZ 20B EDZ 22B EDZ 24B EDZ 27B EDZ 30B EDZ 33B EDZ 36B Zener voltage ：Vz(V) Operating resistance ：Zz(Ω) Rising operating resistance ：Zz(Ω) Reverse current ： IR(uA) MIN. 3.600 3.890 4.170 4.550 4.980 5.490 6.060 6.650 7.280 8.020 8.850 9.770 10.760 11.740 12.910 14.340 15.850 17.560 19.520 21.540 23.720 26.190 29.190 32.150 35.070 MAX. 3.845 4.160 4.430 4.750 5.200 5.730 6.330 6.930 7.600 8.360 9.230 10.210 11.220 12.240 13.490 14.980 16.510 18.350 20.390 22.470 24.780 27.530 30.690 33.790 36.870 Iz(mA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.0 2.0 2.0 2.0 MAX. 100 100 100 100 80 60 60 40 30 30 30 30 30 30 37 42 50 65 85 100 120 150 200 250 300 Iz(mA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.0 2.0 2.0 2.0 MAX. 1000.0 1000.0 1000.0 800.0 500.0 200.0 100.0 60.0 60.0 60.0 60.0 60.0 60.0 80.0 80.0 80.0 80.0 80.0 100.0 100.0 120.0 150.0 200.0 250.0 300.0 Iz(mA) 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 MAX. 10.0 5.0 5.0 2.0 2.0 1.0 1.0 0.5 0.5 0.5 0.5 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 VR(V) 1.0 1.0 1.0 1.0 1.5 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 15.0 17.0 19.0 21.0 23.0 25.0 27.0 Type No. TYPE EDZ　3.6B EDZ　3.9B EDZ　4.3B EDZ　4.7B EDZ　5.1B EDZ　5.6B EDZ　6.2B EDZ　6.8B EDZ　7.5B EDZ　8.2B EDZ　9.1B EDZ　10B EDZ　11B TYPE　NO. 62 72 82 92 A2 C2 E2 F2 H2 J2 L2 05 15 TYPE EDZ　12B EDZ　13B EDZ　15B EDZ　16B EDZ　18B EDZ　20B EDZ　22B EDZ　24B EDZ　27B EDZ　30B EDZ　33B EDZ　36B TYPE　NO. 25 35 45 55 65 75 85 95 A5 C5 E5 F5 　 Rev.C 2/4 EDZ8.2B Diodes Electrical characteristic curves (Ta=25°C) 10 1 ZENER CURRENT:Iz(mA) 0.1 4.7 0.01 4.3 3.9 5.6 3.6 5.1 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 0.001 0 5 10 15 20 ZENER VOLTAGE:Vz(V) Vz-Iz CHARACTERISTICS 25 30 35 40 160 POWER DISSIPATION:Pd(mW) 140 10000 PRSM t 120 100 80 60 40 20 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE:Ta(℃) Pd-Ta　CHARACTERISTICS 0.12 0.1 40 35 30 25 20 15 10 5 0 -5 0 10 20 30 ZENER VOLTAGE：Vz(V) γz-Vz CHARACTERISTICS 40 REVERSE SURGE MAXIMUM POWER:PRSM(W) 1000 100 10 1 0.1 0.001 0.01 0.1 1 10 100 TIME:t(ms) PRSM-TIME CHARACTERISTICS 1000 Rth(j-a) TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) TEMP.COEFFICIENCE:γz(mV/℃) 100 TEMP.COEFFICIENCE:γz(％/℃) 0.08 0.06 0.04 0.02 0 -0.02 -0.04 -0.06 -0.08 Rth(j-c) 10 Mounted on epoxy board IM=10mA IF=100mA 1 1ms time 300us 0.1 0.001 0.01 0.1 1 10 100 TIME:t(s) Rth-t CHARACTERISTICS 1000 Rev.C 3/4 EDZ8.2B Diodes 10 Ta=25℃ REVERSE CURRENT:IR(nA) ZENER CURRENT:Iz(mA) 1000 100 Ta=75℃ 10 1 Ta=25℃ 0.1 0.01 0.001 1 0 1 2 3 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 4 0 1 2 3 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 4 Ta=-25℃ Ta=125℃ CAPACITANCE BETWEEN TERMINALS:Ct(pF) 100 f=1MHｚ 1 Ta=-25℃ Ta=75℃ 0.1 Ta=125℃ 10 0.01 0.001 6 7 8 9 ZENER VOLTAGE：Vz(V) Vz-Iz CHARACTERISTICS 0.0001 7.7 7.6 7.5 7.4 7.3 7.2 Vz DISPERSION MAP REVERSE CURRENT:IR(nA) Ta=25℃ IZ=5mA n=30pcs 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 IR DISPERSION MAP AVE:0.148nA Ta=25℃ VR=4.0V n=30pcs 100 90 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 80 70 60 50 40 30 20 10 0 Ct DISPERSION MAP AVE:40.1pF Ta=25℃ f=1MHz VR=0V n=10pcs ZENER VOLTAGE:Vz(V) AVE:7.494V 100 DYNAMIC IMPEDANCE:Zz(Ω) 10 1 0.1 1 ZENER CURRENT:Iz(mA) Zz-Iz CHARACTERISTICS 10 Rev.C 4/4 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1