KD3003-DC70A

KD3003-DC70A Printhead Thick film thermal printhead (with thermal historical control) KD3003-DC70A DC70 series has our own internally developed heat-history control function. This product is best suited for applications which require 24 hours operation like factory production lines. Applications High speed label printer High speed bar code printer High speed ticket printer Various high speed terminal printers Features 1) Newly developed thick-film fast response thermal element and driver LSI with the function of thermal history control which is added the future history control are employed for this series. It is possible to print with super high speed of 10 inches / s or 250 mm / s. 2) 150km life realized by attributing durable new protection film. 3) New partial glaze construction makes it compatible with the thermal transfer application. External dimensions (Unit : mm) LABEL 91 6.1±0.4 3-M3(Effective Depth 3) 20.656±0.2 DOT #960 40±0.3 20±0.3 (4.844) 81.312(Effective Print Width) Dot #1 Dot #960 (5) φ3H10 Length 4 (Effective Depth 3) 25±0.5 Max.36 Max.45 Ma x.φ 20 (20.8) (3) 15.3±0.3 Max.12 60.5±0.3 20.5±0.3 Max.5.5 φ3H10 (Effective Depth 3) #2 #20 #6 #1 #1 CONNECTOR A #19 CONNECTOR B 17.8±0.2 7.3±0.3 1/3 KD3003-DC70A Printhead Equivalent circuit VH(COM) 220µF 35V GND 0.1µF 50V VDD(+5) DOT #960 DOT #1 / STB2 / STB1 / RESET LATCH REGISTER CLKIN2 DI2 DO2 CLKOUT2 CLKIN1 DI1 DO1 / LOAD START TO EACH IC INC SEL2 SEL1 TM TM THERMISTOR 30kΩ B : 3950 DI No. DI2 DI1 DOT No. 960~513 512~ 1 / STB No. / STB2 / STB1 DOT No. 960~513 512~ 1 CLK No. CLKIN2 CLKIN1 DOT No. 960~513 512~ 1 Fig.1 Pin assignments CONNECTOR A No. 1 2 3 4 5 6 7 8 9 10 Circuit VDD VDD SEL2 SEL1 CLKIN2 (CP) NC DI2 DI1 INC / LOAD No. 11 12 13 14 15 16 17 18 19 20 Circuit / RESET START DO1 DO2 TM TM / STB2 / STB1 CLKOUT2 CLKIN1 CONNECTOR B No. 1 2 3 4 5 6 Circuit VH (COM) VH (COM) VH (COM) GND GND GND 2/3 KD3003-DC70A Printhead Characteristics Parameter Effective printing width Dot pitch Total dot number Average resistance value Applied voltage Applied power Print cycle Maximum number of dots energized simultaneously Maximum clock frequency Maximum roller diameter Running life / pulse life Operating temperature Symbol − − − Rave VH PO SLT − − − − − Typical 81.312 0.0847 960 1000 24 0.53 0.41 960 8 φ20.0 150/(1×10 ) 8 Unit mm mm dots Ω V W/dot ms dots MHz mm km/pulses °C 5 to 45 Data sheets 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 SLT : 0.82ms/line SUPPLY ENERGY (Max.) (mJ/dot) 0.7 0.6 0.5 0.4 0.3 Level5 Level3 Level4 Level1 Level2 OPTICAL DENSITY 0.2 Level6 0.1 0.0 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 ENERGY (mJ/dot) SCANNING LINE TIME (ms) Fig.2 Representative density curve Fig.3 Maximum energy curve 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1