KTR18EZPF1301

High voltage resistance chip resistors KTR series ● Datasheet Features 1)Twice the rated voltage of conventional products.. 2)Perfect for use in high voltage circuit. (Camera Flash circuit, etc) 3)ROHM resistors have obtained ISO9001 / ISO / TS16949 certification. 4)Corresponds to AEC-Q200. ● Products list Size Part No. (mm) (inch) Rated power (70℃) Limiting plement voltage Temperature coefficient Resistance tolerance Resistance range Operating temperature range (W) (V) (ppm / ℃) (%) (Ω) (℃) KTR03 1608 0603 0.10 350 KTR10 2012 0805 0.125 400 KTR18 3216 1206 0.25 500 KTR25 3225 1210 0.33 600 ±200 ±100 ±200 ±100 ±200 ±100 ±200 ±100 ±200 1≦R≦10 10≦R≦10M 1≦R≦10M 1≦R≦10M 1≦R≦10M 1≦R≦10M 1≦R≦10M 1≦R≦10M 1≦R≦10M F ( ±1% ) F ( ±1% ) J ( ±5% ) F ( ±1% ) J ( ±5% ) F ( ±1% ) J ( ±5% ) F ( ±1% ) J ( ±5% ) (E24/96 series) (E24/96 series) (E24 series) (E24/96 series) (E24 series) (E24/96 series) (E24 series) (E24/96 series) (E24 series) Automotive grade available -55 ～ +155 Yes -55 ～ +155 Yes -55 ～ +155 Yes -55 ～ +155 Yes * E24 : Standard products, E96 : Custom products. ● Part number description K T R Part No. KTR (High voltage resistance chip resistors) 1 0 Size (mm [inch]) EZ P J Resistance tolerance Packaging specifications code 03(1608 [0603]) 10(2012 [0805]) 18(3216 [1206]) 25(3225 [1210]) www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. Packaging Part No. Code specifications Paper tape KTR03 EZP (4mm Pitch) Paper tape KTR10 EZP (4mm Pitch) Paper tape KTR18 EZP (4mm Pitch) Embossed tape KTR25 JZP (4mm Pitch) 1/4 Quantity / Reel F( ±1% ) J ( ±5% ) 1 0 0 Nominal resistance Resistance code, 3 or 4 digits. 000 denotes jumper type. 5,000 Resistance tolerance 5,000 F J 5,000 4,000 Resistance code ： ： 4 digits 3 digits EX.) 1Ω = 1R00 (±1%) 1R0 (±5%) 10Ω = 10R0 (±1%) 100 (±5%) 1MΩ = 1004 (±1%) 105 (±5%) 2018.09 - Rev.F KTR series ● Datasheet Chip resistor dimensions and markings ■KTR03 ■KTR10/18/25 There are three or four digits used for the calculation number according to IEC code and "R" is used for the decimal point. (Unit:mm) Part No. (mm) (inch) L W t a b Marking existence KTR03 1608 0603 1.60±0.10 0.80±0.10 0.45±0.10 0.30±0.20 0.30±0.20 No* KTR10 2012 0805 2.00±0.10 1.25±0.10 0.55±0.10 0.30±0.20 0.40±0.20 Yes KTR18 3216 1206 3.20±0.15 1.60±0.15 0.55±0.10 0.30±0.25 0.50±0.25 Yes KTR25 3225 1210 3.20±0.15 2.50±0.15 0.55±0.10 0.30±0.25 0.50±0.25 Yes *Only with spuare mark ● Land pattern example (Unit:mm) Dimensions A B C D KTR03 1.0 2.0 0.8 0.5 KTR10 1.2 2.6 1.15 0.7 KTR18 2.2 4.0 1.5 0.9 KTR25 2.2 4.0 2.3 0.9 Part No. www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. 2/4 2018.09 - Rev.F KTR series ● Datasheet Derating curve When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curves below. ■KTR03/10/18/25 ● Characteristics Guaranteed > Resistor type See P.1 Test items Resistance Variation of resistance with temperature Test conditions 20℃ Measurement：+25/-55, +25/+125℃ See P.1 Test voltage is the smaller one of ① or ② ①Rated voltage(current)×2.5， 2s ②Maximum overload voltage ※ ±(2.0％＋0.1Ω) Overload Anew uniform coating of minimum of 95% of the surface being immersed and no soldering damage. ±(1.0％＋0.05Ω) No remarkable abnormality on the appearance. Solderability Resistance to soldering heat Rapid change of temperature ±(1.0％＋0.05Ω) Damp heat, steady state ±(3.0％＋0.1Ω) Endurance at 70℃ ±(3.0％＋0.1Ω) Endurance ±(3.0％＋0.1Ω) Resistance to solvent ±(1.0％＋0.05Ω) Bend strength of the end face plating KTR10 800V 40℃，93％(Relative humidity) Test time：1,000h Rated voltage(current),70℃ 1.5h:ON－0.5h:OFF Test time：1,000h 155℃ Test time：1,000h 23±5℃ Immersion cleaning, Solvent: 2-propanol ±(1.0％＋0.05Ω) Without mechanical damage such as breaks. KTR18 1000V Soldering condition：260±5℃ Duration of immersion：10±1s Test temp：-55℃～+125℃ 5cycle Compliance Standard(s) : IEC60115-8 JISC 5201-8 ※Maximum overload voltage (Test voltage) KTR03 500V Rosin-ethanol solution(25% weight) Soldering condition：245±5℃ Duration of immersion：2.0±0.5s KTR25 1200V www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. 3/4 2018.09 - Rev.F KTR series ● Datasheet Tape dimensions ■Paper tape Part No. W F E A0 KTR03 8.0±0.3 3.5±0.05 1.75±0.1 KTR10 8.0±0.3 3.5±0.05 1.75±0.1 KTR18 8.0±0.3 3.5±0.05 1.75±0.1 Part No. D0 +0.1 Φ1.5 0 Φ1.5 +0.1 0 Φ1.5 +0.1 0 P0 P1 4.0±0.1 4.0±0.1 2.0±0.05 MAX1.1 4.0±0.1 4.0±0.1 2.0±0.05 MAX1.1 4.0±0.1 4.0±0.1 2.0±0.05 MAX1.1 KTR03 KTR10 KTR18 1.1±0.1 +0.2 -0.1 1.95 +0.1 -0.05 1.65 P2 ■Embossed tape Part No. KTR25 ● (Unit : mm) B0 W F E 8.0±0.3 3.5±0.05 1.75±0.1 D0 Φ1.5 +0.1 0 P0 P1 4.0±0.1 4.0±0.1 A0 1.9±0.1 +0.2 -0.1 3.5 +0.15 -0.05 2.4 K (Unit : mm) B0 3.0±0.1 3.5±0.1 P2 K 2.0±0.05 MAX1.1 Reel dimensions Part No. KTR03 KTR10 KTR18 KTR25 www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. A Φ180 0 -1.5 B Φ60 +1 0 4/4 C 9 +1.0 0 (Unit : mm) D Φ13±0.2 2018.09 - Rev.F Notice Precaution on using ROHM Products 1. (Note 1) If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment , aircraft/spacecraft, nuclear power controllers, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific Applications. (Note1) Medical Equipment Classification of the Specific Applications JAPAN USA EU CHINA CLASSⅢ CLASSⅡb CLASSⅢ CLASSⅢ CLASSⅣ CLASSⅢ 2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which a failure or malfunction of our Products may cause. The following are examples of safety measures: [a] Installation of protection circuits or other protective devices to improve system safety [b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure 3. Our Products are not designed under any special or extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our Products under any special or extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents [b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust [c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves [e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items [f] Sealing or coating our Products with resin or other coating materials [g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning residue after soldering [h] Use of the Products in places subject to dew condensation 4. The Products are not subject to radiation-proof design. 5. Please verify and confirm characteristics of the final or mounted products in using the Products. 6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied, confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 7. De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in the range that does not exceed the maximum junction temperature. 8. Confirm that operation temperature is within the specified range described in the product specification. 9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in this document. Precaution for Mounting / Circuit board design 1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product performance and reliability. 2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products, please consult with the ROHM representative in advance. For details, please refer to ROHM Mounting specification Notice-PAA-E © 2015 ROHM Co., Ltd. All rights reserved. Rev.003 Precautions Regarding Application Examples and External Circuits 1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the characteristics of the Products and external components, including transient characteristics, as well as static characteristics. 2. You agree that application notes, reference designs, and associated data and information contained in this document are presented only as guidance for Products use. Therefore, in case you use such information, you are solely responsible for it and you must exercise your own independent verification and judgment in the use of such information contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of such information. Precaution for Electrostatic This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control). Precaution for Storage / Transportation 1. Product performance and soldered connections may deteriorate if the Products are stored in the places where: [a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [b] the temperature or humidity exceeds those recommended by ROHM [c] the Products are exposed to direct sunshine or condensation [d] the Products are exposed to high Electrostatic 2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is exceeding the recommended storage time period. 3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads may occur due to excessive stress applied when dropping of a carton. 4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of which storage time is exceeding the recommended storage time period. Precaution for Product Label A two-dimensional barcode printed on ROHM Products label is for ROHM’s internal use only. Precaution for Disposition When disposing Products please dispose them properly using an authorized industry waste company. Precaution for Foreign Exchange and Foreign Trade act Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign trade act, please consult with ROHM in case of export. Precaution Regarding Intellectual Property Rights 1. All information and data including but not limited to application example contained in this document is for reference only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. 2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the Products with other articles such as components, circuits, systems or external equipment (including software). 3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to manufacture or sell products containing the Products, subject to the terms and conditions herein. Other Precaution 1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM. 2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of ROHM. 3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the Products or this document for any military purposes, including but not limited to, the development of mass-destruction weapons. 4. The proper names of companies or products described in this document are trademarks or registered trademarks of ROHM, its affiliated companies or third parties. Notice-PAA-E © 2015 ROHM Co., Ltd. All rights reserved. Rev.003 Datasheet General Precaution 1. Before you use our Products, you are requested to carefully read this document and fully understand its contents. ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any ROHM’s Products against warning, caution or note contained in this document. 2. All information contained in this document is current as of the issuing date and subject to change without any prior notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales representative. 3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccuracy or errors of or concerning such information. Notice – WE © 2015 ROHM Co., Ltd. All rights reserved. Rev.001 Datasheet KTR18EZPF - Web Page Buy Distribution Inventory Part Number Package Unit Quantity Minimum Package Quantity Packing Type Constitution Materials List RoHS KTR18EZPF 5000 5000 Taping inquiry Yes Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ROHM Semiconductor: KTR18EZPF4993 KTR18EZPF4992 KTR18EZPF4994 KTR18EZPF3163 KTR18EZPF2553 KTR18EZPF2493 KTR18EZPF5762 KTR18EZPF8253 KTR18EZPF3321 KTR18EZPF1211 KTR18EZPF1911 KTR18EZPF3740 KTR18EZPF4870 KTR18EZPF3014 KTR18EZPF4420 KTR18EZPF9092 KTR18EZPF84R5 KTR18EZPF1020 KTR18EZPF1783 KTR18EZPF2804 KTR18EZPF5113 KTR18EZPF64R9 KTR18EZPF9762 KTR18EZPF4422 KTR18EZPF8452 KTR18EZPF2670 KTR18EZPF2100 KTR18EZPF61R9 KTR18EZPF1153 KTR18EZPF3572 KTR18EZPF2941 KTR18EZPF1272 KTR18EZPF2052 KTR18EZPF2152 KTR18EZPF35R7 KTR18EZPF1181 KTR18EZPF40R2 KTR18EZPF1910 KTR18EZPF5490 KTR18EZPF5112 KTR18EZPF1332 KTR18EZPF9090 KTR18EZPF4751 KTR18EZPF1650 KTR18EZPF1240 KTR18EZPF1183 KTR18EZPF4752 KTR18EZPF1781 KTR18EZPF23R2 KTR18EZPF4023 KTR18EZPF2610 KTR18EZPF2871 KTR18EZPF1273 KTR18EZPF2494 KTR18EZPF1023 KTR18EZPF2373 KTR18EZPF4320 KTR18EZPF76R8 KTR18EZPF3240 KTR18EZPF1400 KTR18EZPF2803 KTR18EZPF1580 KTR18EZPF2262 KTR18EZPF4641 KTR18EZPF6491 KTR18EZPF3481 KTR18EZPF6812 KTR18EZPF1433 KTR18EZPF54R9 KTR18EZPF1623 KTR18EZPF8871 KTR18EZPF17R8 KTR18EZPF44R2 KTR18EZPF2800 KTR18EZPF1912 KTR18EZPF1541 KTR18EZPF2101 KTR18EZPF6980 KTR18EZPF7320 KTR18EZPF3743 KTR18EZPF1151 KTR18EZPF3923 KTR18EZPF21R5 KTR18EZPF5361 KTR18EZPF3651 KTR18EZPF43R2 KTR18EZPF7871 KTR18EZPF7321 KTR18EZPF9311 KTR18EZPF4221 KTR18EZPF2552 KTR18EZPF1652 KTR18EZPF3160 KTR18EZPF6650 KTR18EZPF16R5 KTR18EZPF1621 KTR18EZPF4022 KTR18EZPF2490 KTR18EZPF2050 KTR18EZPF3483