MCR01MZSF1003

MCR01 Resistors Thick film rectangular MCR01 (1005 size : 1 / 16W) !Features 1) Extremely small light Area ratio is 60% smaller than that of chip 1608, while weight ratio has been cut 75%. 2) Highly reliable chip resistor Ruthenium oxide dielectric offers superior resistance to the elements. 3) Electrodes not corroded by soldering Thick film makes the electrodes very strong. 4) Flat surface further facilitates mounting Mounting can also be automated. 5) ROHM resistors have approved ISO–9001 certification. Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product before using or ordering it. !Ratings Item Rated power Conditions Specifications Power must be derated according to the power derating curve in Figure 1 when ambient temperature exceeds 70°C. 0.063W (1 / 16W) at 70°C 100 POWER LOAD (%) 80 60 40 20 0 −55 0 70 100 125 AMBIENT TEMPERATURE (°C) Fig.1 Rated voltage The voltage rating is calculated by the following equation. If the value obtained exceeds the limiting element voltage, the voltage rating is equal to the maximum operating voltage. E= P×R Nominal resistance Operating temperature E: Rated voltage (V) P: Rated power (W) R: Nominal resistance (Ω) Limiting element voltage 50V See Table 1. −55°C to +125°C 1/5 MCR01 Resistors Table 1 Jumper type Resistance Max. 50mΩ Rated current Resistance tolerance 1A J (±5%) Operating temperature −55°C to +125°C F (±1%) D (±0.5%) Resistance range (Ω) Resistance temperature coefficient (ppm / °C) 1.0≤R