Thick Film Chip Resistors
MCR Series < Not for Automotive application >
Datasheet
Features
1)
Full line up from ultra small size (01005) to 2512 with jumper type.
2)
ROHM resistors have obtained ISO9001/ISO/TS16949 certification.
Size
Part No.
MCR006
(mm)
(inch)
0603
0201
MCR01
1005
0402
MCR03
1608
0603
MCR10
2012
0805
MCR18
3216
1206
MCR25
3225
1210
MCR50
5025
2010
MCR100
6432
2512
Packing
Specification
Type Code
Quantity / Reel
YRT
15,000
Paper tape
(2mm pitch)
MRT
10,000
ERT
5,000
Paper tape
(4mm pitch)
JRT
4,000
Embossed tape
(4mm pitch)
Part Number Description
M C R
0 0 6
Part No.
Size (mm [inch])
MCR
006 (0603 [0201])
01 (1005 [0402])
03 (1608 [0603])
10 (2012 [0805])
18 (3216 [1206])
25 (3225 [1210])
50 (5025 [2010])
100 (6432 [2512])
(Micro chip resistors)
Y R T
Type Code
J
1 0 0
Resistance Tolerance
Nominal Resistance
D ( ±0.5% )
F ( ±1% )
J ( ±5% ) (Including jumper type)
Resistance code, 3 or 4 digits.
000 denotes jumper type.
Resistance
tolerance
D,F
J
Resistance
code
:
:
4 digits
3 digits
Ex.)
1Ω = 1R0 ( ±5% )
9.1 Ω = 9R1 ( ±5% )
10 Ω = 10R0 ( ±0.5%,±1% )
100 ( ±5% )
2.2M Ω = 2204 ( ±1% )
225 ( ±5% )
www.rohm.com
c 2015 ROHM Co., Ltd. All rights reserved.
○
1/6
2015.02 - Rev.F
Datasheet
MCR series < Not for Automotive application >
Products List
Part No.
Type Code
Rated Power Limiting Element
(70°C)
Voltage
(W)
MCR006
MCR01
MCR03
YRT
MRT
ERT
(V)
0.05
25
Temperature
Coefficient
Resistance
Tolerance
(ppm / °C)
(%)
+600 / −200
±250
J(±5%)
1.0Ω
10Ω
to 9.1Ω
to 10MΩ
±250
F(±1%)
10Ω
to 10MΩ
D(±0.5%)
10Ω
1kΩ
to
to
910Ω
1MΩ
Jumper type : Rmax = 50m Ω / Imax. = 0.5A
+500 / −250
1.0Ω
J(±5%)
10Ω
±200
10Ω
F(±1%)
10Ω
±100
1MΩ
±100
10Ω
D(±0.5%)
100Ω
±50
to
to
to
to
to
to
to
9.1Ω
10MΩ
976kΩ
2.2MΩ
2.2MΩ
91Ω
1MΩ
Jumper type : Rmax = 50m Ω / Imax. = 1A
1.0Ω
±400
J(±5%)
10Ω
±200
10Ω
10Ω
±100
F(±1%)
1MΩ
10Ω
±100
D(±0.5%)
±50
100Ω
to
to
to
to
to
to
to
9.1Ω
10MΩ
976kΩ
10MΩ
10MΩ
91Ω
1MΩ
±200
±100
0.063
50
0.1
50
Resistance Range
Series
Operating
Temperature
Range
(°C)
E24
−55 to +125
E24
E24,E96
E24
E24
E24,E96
Jumper type : Rmax = 50m Ω / Imax. = 1A
±400
±200
J(±5%)
1.0Ω
10Ω
to 9.1Ω
to 10MΩ
E24
±100
F(±1%)
10Ω
10Ω
1MΩ
to 976kΩ
to 2.2MΩ
to 2.2MΩ
E24,E96
±100
±50
D(±0.5%)
10Ω
100Ω
to
to
0.125
MCR10
150
ERT
0.1
91Ω
1MΩ
E24
1.0Ω
10Ω
to 9.1Ω
to 10MΩ
E24
10Ω
10Ω
1MΩ
10Ω
100Ω
to 976kΩ
to 2.2MΩ
to 2.2MΩ
to
91Ω
to 1MΩ
E24,E96
Jumper type : Rmax = 50m Ω / Imax. = 2A
0.25
200
MCR18
ERT
±400
±200
J(±5%)
±100
F(±1%)
±100
±50
0.125
D(±0.5%)
−55 to +155
Jumper type : Rmax = 50m Ω / Imax. = 2A
MCR25
MCR50
JRT
JRT
0.25
200
0.5
200
±200
±100
±100
J(±5%)
F(±1%)
1.0Ω
10Ω
10Ω
to 9.1Ω
to 3.3MΩ
to 1MΩ
Jumper type : Rmax = 50m Ω / Imax. = 2A
±250
1.0Ω to 9.1Ω
J(±5%)
10Ω to 560kΩ
±100
10Ω to 180kΩ
F(±1%)
±100
E24
E24,E96
E24
E24,E96
Jumper type : Rmax = 50m Ω / Imax. = 2A
MCR100
JRT
1
200
±250
±100
±100
J(±5%)
F(±1%)
1.0Ω
10Ω
10Ω
to 9.1Ω
to 100kΩ
to 82kΩ
E24
E24,E96
−55 to +125
Jumper type : Rmax = 50m Ω / Imax. =2A
∗Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product
before using or ordering it.
∗Rated voltage is determained from the following.
When rated voltage exceeds the limiting element voltage, the limitng element voltage shall be the rated voltage.
∗Rated voltage =
Rated power
Rasistance
www.rohm.com
c 2015 ROHM Co., Ltd. All rights reserved.
○
2/6
2015.02 - Rev.F
Datasheet
MCR series < Not for Automotive application >
Chip Resistor Dimensions and Markings
MCR006 / 01 / 03
L
103
MCR10 / 18 / 25 / 50 / 100
L
a
a
W
There are three or four digits used for the calculation number
according to IEC code and “R”is used for the decimal point.
W
a
t
t
b
b
b
(Unit : mm)
Part No.
Type Code
(mm)
(inch)
L
W
t
a
b
Marking
existence
MCR006
YRT
0603
0201
0.6±0.03
0.3±0.03
0.23±0.03
0.15±0.05
0.15±0.05
No
No
MCR01
MRT
1005
0402
1.0±0.05
0.5±0.05
0.35±0.05
0.2±0.1
0.25 +0.05
−0.1
MCR03
ERT
1608
0603
1.6±0.1
0.8±0.1
0.45±0.1
0.3±0.2
0.3±0.2
Yes ∗
MCR10
ERT
2012
0805
2.0±0.1
1.25±0.1
0.5±0.1
0.35±0.2
0.35±0.2
Yes
MCR18
ERT
3216
1206
3.05±0.15
1.55±0.15
0.55±0.1
0.45±0.25
0.35±0.25
Yes
1210
3.2±0.15
2.5±0.15
0.55±0.15
0.5±0.25
0.5±0.25
Yes
2.5±0.15
0.55±0.15
0.6±0.25
0.6±0.25
Yes
3.2±0.15
0.55±0.15
0.6±0.25
0.6±0.25
Yes
MCR25
JRT
3225
MCR50
JRT
5025
2010
5.0±0.15
MCR100
JRT
6432
2512
6.3±0.15
Symbol for E96 Series nominal resistance value
Marking method of jumper type
Jumper type
MCR006 / 01 / 25 / 50 / 100
MCR03 / 10 / 18
Marking existence
No
Yes
Marking method of MCR03
The description of markings on the chip resistor are as shown below.
① Marking method (J class):
The nominal resistance is expressed in by E-24series 3 digits.
The first 2 digits apply to the resistance value and the last one indicates
the number of zeros to follow. The R is used as a decimal point.
Example：100k= 104
② Marking method (F/D class):
･For the resistance value contained in E96 series.
The nominal resistance is expressed in 3 digits. The first 2 digits is
symbol to the resistance value and the last one is symbol to multipliers.
3
Example : 100k= 01d
(01d100×10 = 100,000= 100k)
1
Example : 3.01k= 47b (47b301×10 = 3010= 3.01k)
･For the resistance value not contained in E96 series and contained
in E-24 series.
The marking is expressed by E-24 series in 3 digits and one short bar
under the last marking letter.
Example : 390= 391
Symbol
E96
Symbol
E96
Symbol
E96
Symbol
E96
01
100
25
178
49
316
73
562
02
102
26
182
50
324
74
576
03
105
27
187
51
332
75
590
04
107
28
191
52
340
76
604
05
110
29
196
53
348
77
619
06
113
30
200
54
357
78
634
07
115
31
205
55
365
79
649
08
118
32
210
56
374
80
665
09
121
33
215
57
383
81
681
10
124
34
221
58
392
82
698
11
127
35
226
59
402
83
715
12
130
36
232
60
412
84
732
13
133
37
237
61
422
85
750
14
137
38
243
62
432
86
768
15
140
39
249
63
442
87
787
16
143
40
255
64
453
88
806
17
147
41
261
65
464
89
825
18
150
42
267
66
475
90
845
19
154
43
274
67
487
91
866
20
158
44
280
68
499
92
887
21
162
45
287
69
511
93
909
22
165
46
294
70
523
94
931
23
169
47
301
71
536
95
953
24
174
48
309
72
549
96
976
Symbol for multipliers
Symbol
A
b
C
d
E
F
X
Y
multipliers
100
101
102
103
104
105
10−1
10−2
Land pattern Example
(Unit : mm)
B
D
Land
C
A
www.rohm.com
c 2015 ROHM Co., Ltd. All rights reserved.
○
3/6
Dimensions
Part No.
Type Code
A
B
C
D
MCR006
YRT
0.3
0.84
0.3
0.27
MCR01
MRT
0.5
1.3
0.5
0.4
MCR03
ERT
1.0
2.0
0.8
0.5
MCR10
ERT
1.2
2.6
1.15
0.7
MCR18
ERT
2.2
4.0
1.5
0.9
MCR25
JRT
2.2
4.0
2.3
0.9
MCR50
JRT
3.8
6.0
2.3
1.1
MCR100
JRT
5.1
8.1
3.0
1.5
2015.02 - Rev.F
Datasheet
MCR series < Not for Automotive application >
Derating Curve
When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curves below.
MCR006 / 100
PERCENT RATED POWER (%)
PERCENT RATED POWER (%)
80
60
40
20
0
MCR01 / 03 / 10 / 18 / 25 / 50
100
100
−55
0
70
100
80
60
40
20
0
125
−55
AMBIENT TEMPERATURE (°C)
0
70
100
155
AMBIENT TEMPERATURE (°C)
Characteristics
Guaranteed Value
Resistor Type
Jumper Type
Test Items
Test Conditions
Resistance
See "Products List"
20°C
Variation of resistance
with temperature
See "Products List"
Measurement : +20 / −55 / +20 / +125°C
± (2.0%+0.1Ω)
Overload
Test voltage is the smaller one of 1 or 2
1 Rated voltage (current) ×2.5, 2s.
2 Maximum overload voltage
Max. 50mΩ
Rosin·Ethanol : 25% (Weight)
Soldering condition : 235±5°C
Duration of immersion : 2.0±0.5s
A new uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
Solderability
± (1.0%+0.05Ω)
Resistance to
soldering heat
Max. 50mΩ
No remarkable abnormality on the appearance.
Soldering condition : 260±5°C
Duration of immersion : 10±1s
Rapid change of
temperature
± (1.0%+0.05Ω)
Max. 50mΩ
Test temp.
−55°C to +125°C 100cycle (MCR006)
−55°C to +125°C 300cycle (MCR01)
−55°C to +125°C 5cycle (MCR03 / 10 / 18 / 25 / 50 / 100)
Damp heat, steady state
± (3.0%+0.1Ω)
Max. 100mΩ
40°C, 93%RH (Relative Humidity)
Test time : 1,000h to 1,048h
Endurance at 70°C
± (3.0%+0.1Ω)
Max. 100mΩ
70°C
Rated voltage (current)
1.5h : ON − 0.5h : OFF
Test time : 1,000h to 1,048h
Endurance
± (3.0%+0.1Ω)
Max. 100mΩ
125°C (MCR006 / 25 / 50 / 100)
155°C (MCR01 / 03 / 10 / 18)
Test time : 1,000h to 1,048h
Resistance to solvent
± (1.0%+0.05Ω)
Max. 50mΩ
23±5°C, Immersion cleaning, 5±0.5min
Solvent : 2−propanol
± (1.0%+0.05Ω)
Max. 50mΩ
Bend strength of
the end face plating
Without mechanical damage such as breaks.
Maximum overload voltage ∗Test voltage
MCR006
MCR01
MCR03
MCR10
MCR18
MCR025
MCR50
MCR100
50V
100V
100V
200V
400V
400V
400V
400V
www.rohm.com
c 2015 ROHM Co., Ltd. All rights reserved.
○
4/6
−
Compliance Standard(s) : IEC60115−8
JISC 5201−8
2015.02 - Rev.F
Datasheet
MCR series < Not for Automotive application >
Tape Dimensions
(Unit : mm)
Paper Tape
P0
P2
Part No.
Type Code
W
F
E
A0
B0
MCR006
YRT
8.0±0.2
3.5±0.05
1.75±0.1
0.38±0.03
0.68±0.03
MCR01
MRT
8.0±0.3
3.5±0.05
1.75±0.1
0.7±0.1
1.2±0.1
MCR03
ERT
8.0±0.3
3.5±0.05
1.75±0.1
1.0±0.1
1.8±0.1
MCR10
ERT
8.0±0.3
3.5±0.05
1.75±0.1
1.55±0.1
2.3±0.1
MCR18
ERT
8.0±0.3
3.5±0.05
1.75±0.1
1.9±0.2
3.5±0.2
MCR25
JRT
8.0±0.2
3.5±0.05
1.75±0.1
2.8±0.2
3.5±0.2
Part No.
Type Code
D0
P0
P1
P2
T2
MCR006
YRT
+0.1
φ1.5
0
4.0±0.1
2.0±0.05
2.0±0.05
Max 0.5
MCR01
MRT
φ1.5
+0.1
0
4.0±0.1
2.0±0.1
2.0±0.05
Max 1.1
MCR03
ERT
φ1.5
+0.1
0
4.0±0.1
4.0±0.1
2.0±0.05
Max 1.1
MCR10
ERT
φ1.5
+0.1
0
4.0±0.1
4.0±0.1
2.0±0.05
Max 1.1
MCR18
ERT
φ1.5
+0.1
0
4.0±0.1
4.0±0.1
2.0±0.05
Max 1.1
MCR25
JRT
φ1.5
+0.1
0
4.0±0.05
4.0±0.1
2.0±0.05
Max 1.1
Part No.
Type Code
W
F
E
A0
B0
MCR25
JRT
8.0±0.3
3.5±0.05
1.75±0.1
3.0±0.1
3.5±0.1
MCR50
JRT
12±0.3
5.5±0.05
1.75±0.1
3.4±0.2
5.6±0.2
MCR100
JRT
12±0.3
5.5±0.05
1.75±0.1
3.5±0.2
6.7±0.2
Part No.
Type Code
D0
P0
P1
P2
T2
MCR25
JRT
φ1.5
+0.1
0
4.0±0.1
4.0±0.1
2.0±0.05
Max 1.1
MCR50
JRT
φ1.5
+0.1
0
4.0±0.1
4.0±0.1
2.0±0.05
Max 1.1
MCR100
JRT
φ1.5
+0.1
0
4.0±0.1
4.0±0.1
2.0±0.05
Max 1.1
P1
φD0
E
F
W
B0
A0
Top tape
Base paper
(Bottom tape)
Components
Cavity
T2
Embossed Tape
(Unit : mm)
P2
φD
B0
W
F
E
0
P0
A0
P1
T2
www.rohm.com
c 2015 ROHM Co., Ltd. All rights reserved.
○
5/6
2015.02 - Rev.F
Datasheet
MCR series < Not for Automotive application >
02
04
06
08
06
D
04
B
02
A
08
Reel Dimensions
C
Label
ACCORDING TO EIAJ ET-7200B
(Unit : mm)
Part No.
Type Code
MCR006
YRT
MCR01
MRT
MCR03
ERT
MCR10
ERT
MCR18
ERT
MCR25
JRT
MCR50
JRT
MCR100
JRT
www.rohm.com
c 2015 ROHM Co., Ltd. All rights reserved.
○
A
B
0
φ180
−1.5
+1.0
φ60
0
C
9
+1.0
0
13
6/6
D
φ13±0.2
+1.0
0
2015.02 - Rev.F
Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifications :
3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1102A
Datasheet
MCR03ERTF - Web Page
Part Number
Package
Unit Quantity
Minimum Package Quantity
Packing Type
Constitution Materials List
RoHS
MCR03ERTF
5000
5000
Taping
inquiry
Yes
工商网监
湘ICP备2023018690号
