Chip Resistor Networks
MNR Series < Not for Automotive application >
Datasheet
Features
1) Can be mounted even more densely than chip resistors.
2) Convex electrodes secures visual inspection of fillets after soldering.
3) ROHM resistors have obtained ISO9001 / ISO / TS16949 certification.
Size
(mm)
(inch)
No. of
terminals
No. of
elements
Type Code
MNR02
1005 × 2
0402 × 2
4
2
MRAP
MNR04
1005 × 4
0402 × 4
8
4
MRAP
MNR12
1608 × 2
0603 × 2
4
2
ERAP
MNR14
1608 × 4
0603 × 4
8
4
ERAP
MNR15
1608 × 5
0603 × 5
10
8
ERRP
MNR18
1605 × 8
0602 × 8
16
8
ERAP
Part No.
Packing
Specification
Quantity / Reel
Paper tape
(2mm Pitch)
10,000
Paper tape
(4mm Pitch)
5,000
Part Number Description
M N R
0 2
Part No.
Size (mm [inch])
MNR
02 (1005 [0402] × 2)
04 (1005 [0402] × 4)
12 (1608 [0603] × 2)
14 (1608 [0603] × 4)
15 (1608 [0603] × 5)
18 (1605 [0602] × 8)
(Chip Resistor Networks)
M R A P
J
1 0 5
Type Code
Resistance Tolerance
Nominal Resistance
F ( ±1% )
J ( ±5% )(Including jumper type)
Resistance code, 3 or 4 digits.
000 denotes jumper type.
Resistance
tolerance
F
J
Resistance
code
:
:
4 digits
3 digits
Ex.)
1Ω = 1R0
9.1 Ω = 9R1
10 Ω = 10R0
100
1M Ω = 1004
105
www.rohm.com
c 2015 ROHM Co., Ltd. All rights reserved.
○
1/5
( ±5% )
( ±5% )
( ±1% )
( ±5% )
( ±1% )
( ±5% )
2015.02 - Rev.C
MNR series < Not for Automotive application >
Datasheet
Products List
Part No.
MNR02
Type Code
MRAP
Rated Power
(70°C)
Limiting Element
Voltage
(W)
(V)
Maximum
Overload
Voltage
(V)
0.063 / Element
25
−
Temperature Resistance
Coefficient Tolerance
(ppm / °C)
(%)
±200
J(±5%)
Resistance Range
Series
10Ω to 1MΩ
E24
Operating
Temperature
Range
(°C)
Jumper type : Rmax = 50m Ω / Imax. = 1A (Element)
+500/−300
MNR04
MRAP
0.063 / Element
25
1Ω to 9.1Ω
E24
J(±5%)
50
±200
10Ω to 910k
Jumper type : Rmax = 50m Ω / Imax. = 1A (Element)
MNR12
ERAP
0.063 / Element
50
−55 to +155
±200
J(±5%)
10Ω to 1MΩ
±200
F(±1%)
10Ω to 1MΩ
−
E24
Jumper type : Rmax = 50m Ω / Imax. = 1A (Element)
±500
MNR14
ERAP
0.063 / Element
50
2.2Ω to 6.8Ω
E6
J(±5%)
±200
−
10Ω to 1MΩ
E24
±200
10Ω to 1MΩ
F(±1%)
Jumper type : Rmax = 50m Ω / Imax. = 1A (Element)
MNR15
ERRP
0.031 / Element
12.5
±200
−
56Ω to 100kΩ
J(±5%)
E24
−55 to +125
MNR18
ERAP
0.063 / Element
25
±250
−
10Ω to 1MΩ
J(±5%)
E24
Jumper type : Rmax = 50m Ω / Imax. = 1A (Element)
∗Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product
before using or ordering it.
Circuit Construction
MNR02 / 12
R1
R2
MNR04 / 14
R1
R2
R3
MNR15
R1=R2=R3=R4
www.rohm.com
c 2015 ROHM Co., Ltd. All rights reserved.
○
R1
R2
R3
R6
R7
R8
R4
R1
R2
R3
R4
R5
R6
R7
R8
R4
R5
R1=R2
MNR18
R1=R2=R3=R4=R5=R6=R7=R8 R1=R2=R3=R4=R5=R6=R7=R8
2/5
2015.02 - Rev.C
MNR series < Not for Automotive application >
Datasheet
Chip Resistor Dimensions and Markings
MNR02 / 12
MNR04 / 14
b2
b2
MNR15
b1
L
c
c
a
p
c
a
103
a
103
W
W
W
a
a
a
p
p
b2
t
b1
t
L
t
L
MNR18
There are three or four digits used for the calculation
number according to IEC code and “R”is used for the
decimal point.
L
p
c
a
102
W
a
b2 b1
t
(Unit : mm)
b1
b2
c
p
Marking
existence
∗Including jumper type
0.15±0.1
−
0.33±0.1
0.25±0.1
0.67
No
0.2±0.1
0.3±0.1
−
0.25±0.2
0.5
Yes
0.45±0.1
0.3±0.2
−
0.6±0.15
0.3±0.2
0.8
Yes
1.6±0.15
0.5±0.1
0.3±0.2
0.5±0.15
−
0.3±0.2
0.8
Yes
3.2±0.2
1.6±0.15
0.55±0.1
0.3±0.15 0.32±0.15
−
0.3±0.15
0.64
Yes
4.0±0.2
1.6±0.1
0.4±0.1
0.3±0.2
−
0.3±0.2
0.5
Yes
Part No.
Type Code
(mm)
(inch)
L
W
t
a
MNR02
MRAP
1005 × 2
0402 × 2
1.0±0.1
1.0±0.1
0.3±0.1
MRAP
1005 × 4
0402 × 4
2.0±0.1
1.0±0.1
0.4±0.1
MNR12
ERAP
1608 × 2
0603 × 2
1.6±0.15
1.6±0.15
MNR14
ERAP
1608 × 4
0603 × 4
3.2±0.2
MNR15
ERRP
1608 × 5
0603 × 5
MNR18
ERAP
1605 × 8
0602 × 8
MNR04
0.25±0.1
Land pattern Example
Land
MNR02 / 12
MNR04 / 14
MNR15
MNR18
E
C
C
A D
A D
C
C
B
P2
P1
C
C
A D
A D
C
C
B
E
P1
B
B
P2
P2
P1
P1
P2
P1
B
P1
(Unit : mm)
Dimensions
Type Code
A
B
C
D
MNR02
MRAP
0.5
0.35 to 0.4
0.5
MNR04
MRAP
0.5
0.4
0.5
MNR12
ERAP
1.0
0.4 to 0.6
0.7 to 0.8
MNR14
ERAP
1.0
0.4 to 0.6
0.7 to 0.8
MNR15
ERRP
1.0
0.48
MNR18
ERAP
1.0
0.3
Part No.
www.rohm.com
c 2015 ROHM Co., Ltd. All rights reserved.
○
E
P1
1.5
−
0.65 to 0.7
−
1.5
0.3
0.5
0.5 to 0.55
2.4 to 2.6
−
0.8 to 1.0
−
2.4 to 2.6
0.4
0.8
0.8 to 0.9
0.7 to 0.8
2.4 to 2.6
0.32
0.64
0.72
0.7 to 0.8
2.4 to 2.6
−
0.5
−
3/5
P2
2015.02 - Rev.C
MNR series < Not for Automotive application >
Datasheet
Derating Curve
When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curves below.
MNR02 / 04 / 12 / 14
80
60
40
20
0
MNR15 / 18
100
PERCENT RATED POWER (%)
PERCENT RATED POWER (%)
100
−55
0
70
100
80
60
40
20
0
155
−55
0
70
100
125
AMBIENT TEMPERATURE (°C)
AMBIENT TEMPERATURE (°C)
Characteristics
Test Items
Guaranteed Value
Resistor Type
Jumper Type
Test Conditions
Resistance
See "Products List"
20°C
Variation of resistance
with temperature
See "Products List"
Measurement : +20 / −55 / +20 / +125°C
Overload
Solderability
Resistance to
soldering heat
± (2.0%+0.1Ω)
Max. 50mΩ
A new uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
± (1.0%+0.05Ω)
Max. 50mΩ
No remarkable abnormality on the appearance.
Rated voltage (current) ×2.5, 2s.
Maximum overload voltage
Rosin·Ethanol : 25% (weight)
Soldering condition : 235±5°C
Duration of immersion : 2.0±0.5s
Soldering condition : 260±5°C
Duration of immersion : 10±1s
Rapid change of
temperature
± (1.0%+0.05Ω)
Max. 50mΩ
Test temp. : −55°C to +125°C 5cycle
Damp heat, steady state
± (3.0%+0.1Ω)
Max. 100mΩ
40°C, 93%RH (Relative Humidity)
Test time : 1,000h to 1,048h
Endurance at 70°C
± (3.0%+0.1Ω)
Max. 100mΩ
70°C
Rated voltage (current)
1.5h : ON − 0.5h : OFF
Test time : 1,000h to 1,048h
Endurance
± (3.0%+0.1Ω)
Max. 100mΩ
125°C (MNR15 / 18)
155°C (MNR02 / 04 / 12 / 14)
Test time : 1,000h to 1,048h
Resistance to solvent
± (1.0%+0.05Ω)
Max. 50mΩ
23±5°C, Immersion cleaning, 5±0.5min
Solvent : 2−propanol
± (1.0%+0.05Ω)
Max. 50mΩ
Bend strength of
the end face plating
Without mechanical damage such as breaks.
−
Compliance Standard(s) : IEC60115−8
JISC 5201−8
www.rohm.com
c 2015 ROHM Co., Ltd. All rights reserved.
○
4/5
2015.02 - Rev.C
MNR series < Not for Automotive application >
Datasheet
Tape Dimensions
(Unit : mm)
Paper
Tape
P0
P2
P1
φD0
E
F
Part No.
Type Code
W
F
E
A0
B0
MNR02
MRAP
8.0±0.3
3.5±0.05
1.75±0.1
1.2±0.1
1.2±0.1
MNR04
MRAP
8.0±0.3
3.5±0.05
1.75±0.1
1.2±0.1
2.2±0.1
MNR12
ERAP
8.0±0.3
3.5±0.05
1.75±0.1
1.9±0.1
1.9±0.1
MNR14
ERAP
8.0±0.3
3.5±0.05
1.75±0.1
1.9±0.1
3.45±0.1
MNR15
ERRP
8.0±0.3
3.5±0.05
1.75±0.1
1.9±0.1
3.5±0.2
MNR18
ERAP
12.0±0.2
5.5±0.05
1.75±0.1
1.9±0.2
4.3±0.2
Part No.
Type Code
D0
P0
P1
P2
T2
MNR02
MRAP
+0.1
φ1.5
0
4.0±0.1
2.0±0.1
2.0±0.05
Max 0.5
MNR04
MRAP
φ1.5
+0.1
0
4.0±0.1
2.0±0.1
2.0±0.05
Max 1.1
MNR12
ERAP
φ1.5
+0.1
0
4.0±0.1
4.0±0.1
2.0±0.05
Max 1.1
MNR14
ERAP
φ1.5
+0.1
0
4.0±0.1
4.0±0.1
2.0±0.05
Max 1.1
MNR15
ERRP
φ1.5
+0.1
0
4.0±0.1
4.0±0.1
2.0±0.05
Max 1.1
MNR18
ERAP
φ1.5
+0.1
0
4.0±0.1
4.0±0.1
2.0±0.05
Max 1.1
W
B0
A0
Top tape
Base paper
(Bottom tape)
Cavity
Components
T2
Reel Dimensions
02
04
08
06
D
04
B
02
A
06
(MNR02 / 04 / 12 / 14 / 15 / 18)
08
Fig.1
C
Label
According to EIAJ ET-7200B (RRM)
(Unit : mm)
Part No.
Type Code
MNR02
MRAP
MNR04
MRAP
MNR12
ERAP
MNR14
ERAP
MNR15
ERRP
MNR18
ERAP
www.rohm.com
c 2015 ROHM Co., Ltd. All rights reserved.
○
A
φ178±2.0
5/5
B
C
φ60±1.0
9.0±0.5
φ80±1.0
13.8±0.5
D
φ13.5±0.5
2015.02 - Rev.C
Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifications :
3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1102A
