MSL0101RGB

Data Sheet MSL0101 series SRGB-S Features ・ Side view RGB LEDs ・ High brightness, superior color mixing Color Type R GB Specifications Part No. ■ ■ MSL0101RGB ■ Chip Emitting Power Structure Color Dissipation PD(mW) AlGaInP InGaN Red Green Blue 400 Absolute Maximum Ratings (Ta＝25℃) Electrical and Optical Characteristics (Ta＝25℃) Storage Forward Voltage VF Reverse Current IR Dominant Wavelength λD Luminous Intensity IV Forward Peak Forward Reverse Operating Current Current Voltage Temperature Temperature Min.*2 Typ. Max.*2 Max. Min. Typ. Topr(℃) Tstg(℃) Typ.(V) IF(mA) (μA) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA) IF(mA) IFP(mA) VR(V) 50 40 100※ 5 2.1 -40 to +85 -40 to +100 3.3 3.2 20 10 5 619 520 465 624 527 470 629 535 475 20 450 710 220 700 1200 400 20 ※Duty1/20, 1ms or less Dimensions 6.4 5.4 Recommended Solder Pattern Viewing Angle ①PinMark 2.2 1.6 2.15 X-Y 6.9 SCANNING ANGLE (deg) SCANNING ANGLE (deg) X’ - Y’ 0.75 30° 40° 50° 20° 10° 0° 10° 20° 30° 40° Red(R) Green(G) / Blue(B) 50° 60° 70° 80° 60° 70° 80° 90° 100 50° SCANNING ANGLE (deg) SCANNING ANGLE (deg) 30° 40° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° Red(R) Green(G) Blue(B) ① MSL0101RGB G R B ②③④ ⑤⑥ ⑦ 1 0.5 (0.4) 0.3 0.3 0.32 60° 70° 80° 90° 80° 50 0 50 90° 100 1.58 2.18 100 RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) 50 0 50 90° 100 RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) ①② ③④⑤ ⑥⑦ 0.6 0.6 1.06 Tolerance : ±0.2 （unit : mm） （unit : mm） © 2011 ROHM Co., Ltd. All rights reserved. www.rohm.com 1/3 2011.11 - Rev.A MSL0101 series Electrical Characteristics Curves Forward Current-Forward Voltage 100 Ta=25°C ■ ■ ■ ■MSL0101RGB(R) ■MSL0101RGB(G) ■MSL0101RGB(B) FORWARD CURRENT：IF (mA) 10 1 1.0 2.0 3.0 4.0 5.0 FORWARD VOLTAGE：VF (V) Luminous Intensity-Atmosphere Temperature RELATIVE LUMINOUS INTENSITY : (a.u.) 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 -40-30-20-10 0 10 20 30 40 50 60 70 80 90100 ATMOSPHERE TEMPERATURE : Ta (°C) IF=20mA ■ ■ ■MSL0101RGB(R) ■MSL0101RGB(G) ■MSL0101RGB(B) Luminous Intensity-Forward Current RELATIVE LUMINOUS INTENSITY : (a.u.) 2.5 Ta=25°C ■ ■ ■ ■MSL0101RGB(R) ■MSL0101RGB(G) ■MSL0101RGB(B) 2.0 1.5 1.0 0.5 0 0 10 20 30 40 50 FORWARD CURRENT : IF (mA) Derating MAXIMUM FORWARD CURRENT：IF (mA) 60 50 40 30 20 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 ATMOSPHERE TEMPERATURE：Ta (°C) ■ ■ ■MSL0101RGB(R) ■MSL0101RGB(G) ■MSL0101RGB(B) © 2011 ROHM Co., Ltd. All rights reserved. www.rohm.com 2/3 2011.11 - Rev.A MSL0101 series Rank Reference of Brightness Triple Color IF Intensity Package Height size (mm) （mA） Emitting Color (mcd) 140 to 180 180 to 220 220 to 280 280 to 360 360 to 450 450 to 560 560 to 710 710 to 900 900 to 1100 1100 to 1400 1400 to 1800 1800 to 2200 2200 to 2800 Red Side View 6922 2.15 20 MSL0101RGB Green （Reflector） Blue Package structure Luminous Part No. Explanation Rank sign (Brightness Rank) ∗ MSL Series name 0101 Package type Emitting type RGB Emitting Color W W MilkyWhite 1 2Y Resin Color Taping Rank sign specifications (Chromaticity Rank) ∗ MSL Multi Color series R G B Red:624nm Green:527nm Blue:470nm ∗ Concerning the rank • At three color lighting simultaneously • Please refer to the rank chart above for luminous intensity classification. • Please refer to the Specification sheet for color classification. • Part name is individual for each rank. • When shipped as sample, the part name will be a representative part name. General products are free of ranks. Please contact sales if rank appointment is needed. ∗ Please refer to the Specification sheet about Taping specification. Packing Specification ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. Please contact the nearest sales office or distributer if necessary. © 2011 ROHM Co., Ltd. All rights reserved. www.rohm.com 3/3 2011.11 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. R1120A