QX2130S

Multimedia ICs QXpander™ processor QX2130FS / QX2130S The QX pander chip (QX-2000 Series) is a sound enhancement sound processor based on QSOUND's QX pander™ technology, and produces virtual 3D sound from ordinary audio signals. This IC requires no special encoding of input signals or additional speakers, and so simplifies the development of high-value-added personal computers, televisions and audio products. •Applications for desktop and notebook multimedia personal computers, televisions, audio equipment, video Speaker systems games and other devices •Features sound from ordinary audio signals. 1) Virtual 3D 2) No special encoding signals are necessary. 3) Three enhanced modes: QX1: Pro Listening QX2: Wide Listening QX3: Wow for Games 4) Internal functions for personal computers: power saver function, output muting function and stereo bypass function. 5) TTL-compatible control pins (at 5V). 6) Low noise (45µVrms) 7) Low power consumption 8) Available in SSOP-A20 pin package or SDIP22 pin package. •Block diagram POWERSAVE BIASOUT RCHOUT CTRL1 RCHIN CR1 CR2 CR3 CR4 VCC 20 VCC 19 18 17 16 15 14 13 12 11 BIAS VIRTUAL AUDIO TM QXpander PROCESSOR GND 1 BIASIN 2 MUTE 3 LCHIN 4 CTRL0 5 CL1 6 CL2 7 CL3 8 CL4 9 LCHOUT 10 GND Note:The above diagram is for the QX2130FS (SSOP - A20 package) 1 Multimedia ICs QX2130FS / QX2130S •Absolute maximum ratings (Ta = 25°C) Parameter Power supply voltage Power dissipation Operating temperature Storage temperature Symbol VCC Pd Topr Limits 13 QX2130FS QX2130S 1000∗1 750∗2 Unit V mW °C °C 0 ~ + 70 – 55 ~ + 125 Tstg ∗1 When mounted on a 90 × 50 × 1.6mm glass epoxy board Reduced by 10.0mW for each increase in Ta of 1°C over 25°C. ∗2 When mounted on a 90 × 50 × 1.6mm glass epoxy board Reduced by 7.5mW for each increase in Ta of 1°C over 25°C. •Recommended operating conditions (Ta = 25°C) Parameter Operating power supply voltage Symbol VCC Min. 4.5 Typ. — Max. 12.5 Unit V 2 Multimedia ICs QX2130FS / QX2130S •Input / output circuits (with QX2130FS) 1pin BIAS IN 2pin MUTE 3pin LCH IN 4pin CTRL0 5pin CL1 50k 5k 50k 30k 75k 2k 30k R R 6pin CL2 7pin CL3 8pin CL4 9pin LCH OUT 11pin POWER SAVE 50k R R R R R R R R 25k 50k 10k 10k 12pin RCH OUT 13pin CR4 14pin CR3 15pin CR2 16pin CR1 R 25k R R R R R R R R R pin17 CTRL1 18pin RCH IN 19pin BIAS OUT 2k 30k 75k 5k 3 Multimedia ICs QX2130FS / QX2130S CC •Analog characteristics (V Parameter 〈Supply current〉 Supply current (QX mode) = + 5V DC, GND = 0V DC, Ta = 25°C) Symbol Min. Typ. Max. Unit Conditions ICC1 ICC2 ICC3 1.3 1.3 — 3.0 3.0 230 5.2 5.2 500 mA mA µA No signal Input No signal Input No signal Input VIN = 100Hz VOUT1% SINGLE channel INPUT VIN = 100Hz VOUT1% SINGLE channel INPUT VIN = 1kHz VOUT1% SINGLE channel INPUT VIN = 1kHz VOUT1% SINGLE channel INPUT VIN = 1kHz VOUT1% SINGLE channel INPUT BW: DIN AUDIO VIN = 1kHz, – 20dBV BW: DIN AUDIO VIN = 1kHz, – 20dBV VIN = 600Hz, L + RIN — — — — — Supply current (stereo mode) Supply current (power saving mode) 〈Maximum input level〉 Maximum input level (QX3 mode) Maximum input level (QX2 mode) Maximum input level (QX1 mode) Maximum input level (stereo mode) Maximum output level 〈Maximum mute level〉 Maximum mute level (QX mode) Maximum mute level (stereo mode) Channel balance Output current Load resistance Load capacitance Input impedance Output impedance 〈Distortion〉 Distortion (QX3 mode) Distortion (QX2 mode) Distortion (QX1 mode) Distortion (stereo mode) 〈Output noise voltage〉 Output noise voltage (QX mode) Output noise voltage (stereo mode) 〈Crosstalk〉 Crosstalk (stereo mode) VINMax.1 VINMax.2 VINMax.3 VINMax.4 VOUTMax. – 8.3 – 7.6 – 7.4 – 2.4 – 3.0 – 5.3 – 4.6 – 4.4 + 0.6 + 0.5 — — — — — dBV dBV dBV dBV dBV VMUTE1 VMUTE2 CB IOUT RL CL RIN ROUT — — – 1.5 — 10 — 50 — – 86 – 97 0 — — — 75 — – 76 – 87 + 1.5 + / –1 — 1000 100 200 dBV dBV dB mA kΩ pF kΩ Ω DSTN1 DSTN2 DSTN3 DSTN4 — — — — 0.15 0.07 0.04 0.02 0.5 0.3 0.2 0.2 % % % % THD + NOISE VIN = 1kHz, – 20dBV THD + NOISE VIN = 1kHz, – 20dBV THD + NOISE VIN = 1kHz, – 20dBV THD + NOISE VIN = 1kHz, – 20dBV BW: DIN AUDIO Rg = 600Ω BW: DIN AUDIO Rg = 600Ω BW: DIN AUDIO VIN = 1kHz, – 20dBV VNOISE1 VNOISE2 — — – 87 – 98 – 77 – 88 dBV dBV CT — – 98 – 88 dBV ∗ BW1: 400Hz – 30kHz (VIN = 1kHz) , BW2: – 30kHz (VIN = 100Hz) 4 Multimedia ICs (VCC = + 12V DC, GND = 0V DC, Ta = 25°C) Parameter 〈Supply current〉 Supply current (QX mode) Supply current (stereo mode) Supply current (power saving mode) 〈Maximum input level〉 Maximum input level (QX3 mode) Maximum input level (QX2 mode) Maximum input level (QX1 mode) Maximum input level (stereo mode) Maximum output level 〈Maximum mute level〉 Maximum mute level (QX mode) Maximum mute level (stereo mode) Channel balance Output current Load resistance Load capacitance Input impedance Output impedance 〈Distortion〉 Distortion (QX3 mode) Distortion (QX2 mode) Distortion (QX1 mode) Distortion (stereo mode) 〈Output noise voltage〉 Output noise voltage (QX mode) Output noise voltage (stereo mode) 〈Crosstalk〉 Crosstalk (stereo mode) QX2130FS / QX2130S Symbol Min. Typ. Max. Unit Conditions ICC1 ICC2 ICC3 2.0 2.0 — 4.9 4.9 560 12.0 12.0 1200 mA mA µA Quiescent Quiescent Quiescent VIN = 100Hz VOUT1% SINGLE channel. INPUT VIN = 100Hz VOUT1% SINGLE channel INPUT VIN = 1kHz VOUT1% SINGLE channel INPUT VIN = 1kHz VOUT1% SINGLE channel INPUT VIN = 1kHz VOUT1% SINGLE channel INPUT BW: DIN AUDIO VIN = 1kHz, – 20dBV BW: DIN AUDIO VIN = 1kHz, – 20dBV VIN = 600kHz, L + RIN VINMAX.1 VINMAX.2 VINMAX.3 VINMAX.4 VOUTMax. + 1.6 + 2.3 + 2.5 + 8.0 + 7.8 + 4.6 + 5.3 + 5.5 + 11.0 + 10.8 — — — — — dBV dBV dBV dBV dBV VMUTE1 VMUTE2 CB IOUT RL CL RIN ROUT — — — — 10 — 50 — – 85 – 97 0 — — — 75 — – 75 – 87 — ±1 — 1000 100 200 dBV dBV dB mA kΩ pF kΩ Ω DSTN1 DSTN2 DSTN3 DSTN4 — — — — 0.16 0.07 0.05 0.02 0.5 0.3 0.2 0.2 % % % % THD + NOISE VIN = 1kHz, – 20dBV THD + NOISE VIN = 1kHz, – 20dBV THD + NOISE VIN = 1kHz, – 20dBV THD + NOISE VIN = 1kHz, – 20dBV BW: DIN AUDIO Rg = 600Ω BW: DIN AUDIO Rg = 600Ω BW: DIN AUDIO VIN = 1kHz, – 20dBV VNOISE1 VNOISE2 — — – 85 – 99 – 75 – 89 dBV dBV CT – 30kHz (VIN = 100Hz) — – 98 – 88 dBV ∗ BW1: 400Hz – 30kHz (VIN = 1kHz) , BW2: 5 Multimedia ICs QX2130FS / QX2130S CC •Digital characteristics (V Parameter High level Input voltage Low level Input voltage I / O current, high level I / O current, low level = 4.5 – 5.5V DC, GND = 0V DC, Ta = 25°C) Symbol VIH VIL IIH IIL Min. 2.0 0.0 0.0 0.0 Typ. — — — — Max. 5.0 0.8 0.3 0.1 Unit V V mA mA VIH = VCC VIL = 0V Conditions (VCC = 5.6 – 12.5V DC, GND = 0V DC, Ta = 25°C) Parameter High level Input voltage Low level Input voltage I / O current, high level I / O current, low level Symbol VIH VIL IIH IIL Min. 2.5 0.0 0.0 0.0 Typ. — — — — Max. 5.0 0.8 0.4 0.1 Unit V V mA mA VIH = 5V VIL = 0V Conditions •Measurement circuit ROUT VCC 5-12V 100µH 0.01µF 100µF 20 VCC 19 RIN 100µF 600 3.3µF 18 17 16 15 14 13 CTRL1 1200p POWERSAVE 2200p 2200p 2200p 0.1µF 8.2k 3.3µF 12 11 BIAS VIRTUAL AUDIO TM QXpander PROCESSOR GND 1 2 3 3.3µF 3.3µF 600 MUTE LIN 2200p 2200p 2200p 0.1µF 4 5 6 7 8 9 3.3µF 8.2k 10 CTRL0 1200p LOUT Unit: R (Ω) C (F) L (H) Note: This diagram is for the QX2130FS (SSOP - A20 package) . Fig.1 6 Multimedia ICs QX2130FS / QX2130S •Control mode (pins 4 and 17) (1) CTRL0 & CTRL1 CTRL0 L L H H CTRL1 H H L H MODE STEREO QX1 QX2 QX3 FUNCTIONS Stereo Bypass Pro Listening Wide Listening Wow for Games ENHANCEMENT — Minimum Middle Maximum (2) Mute (pin 2) CTRL L H MODE NOT Mute Mute FUNCTIONS Enabled Output (Lch / Rch) Muted Output (Lch / Rch) (3) Power saving mode (pin 11) CTRL L H MODE Active Powersave FUNCTIONS Normal Shut Down 7 Multimedia ICs QX2130FS / QX2130S •Application example CTRL1 330k VCC 5-12V 100µH 0.01µF 100µF 20 VCC 19 18 17 16 15 14 13 12 11 100µF RIN 27k 0.1µF ROUT 1µF 2200p 2200p 2200p 0.1µF POWERSAVE 47k 1µF BIAS VIRTUAL AUDIO TM QXpander PROCESSOR GND 1 2 3 0.1µF 10µF 27k 330k MUTE LIN 2200p 1µF LOUT CTRL0 2200p 2200p 0.1µF 4 5 6 7 8 9 1µF 47k 10 Unit: R (Ω) C (F) L (H) Note:The above diagram is for the QX2130FS (SSOP-A20 package) . Fig.2 8 Multimedia ICs QX2130FS / QX2130S •Operation notesand QX2130S were developed using The QX2130FS technologies patented by QSOUND (U.S.A.) (patents 5,105,462 and 5,208,860), as well as other patented technologies (including related patents pending both inside and outside Japan). To use this IC, this technology must be licensed from QSOUND. For inquiries concerning QSOUND™ licensing and technologies, contact: David Gallagher QSOUND LABS, INC. 2748 37th Ave. N.E. Calgary, Alberta, Canada T1Y 5L3 Phone: 1-403-291-2492 Fax: 1-403-250-1521 bbs : 1-403-291-3206 The QSOUND logo and Qx pander™ are registered trademarks of QSOUND. QSOUND recommends that licensed users display the SQOUND logo. •External dimensions (Units: mm) 19.4 ± 0.3 22 12 6.5 ± 0.3 7.8 ± 0.3 5.4 ± 0.2 20 8.7 ± 0.2 11 0.51Min. 3.4 ± 0.2 3.95 ± 0.3 1 0.3 ± 0.1 10 1.8 ± 0.1 0.11 1.778 0.5 ± 0.1 0° ~ 15° 0.8 0.36 ± 0.1 0.3Min. 0.15 SDIP22 SSOP-A20 0.15 ± 0.1 1 11 7.62 9