RB050LA-30GTR

Schottky Barrier Diode RB050LA-30 ●Dimensions (Unit : mm) ●Land size figure(Unit : mm) 1.4 4.7±0.3 ① 3.8±0.2 4.4 ●Features 1)Small and thin power mold type.(PMDT) 2)Low IR 3)High reliability 2.0 0.2±0.15 　　　 0.1 2.6±0.2 1.4 ●Applications General rectification PMDＴ ●Construction Silicon epitaxial planar ●Structure 1.5±0.2 0.95±0.1 ROHM : PMDＴ ① Manufacture Date ●Taping specifications（Unit : mm） φ1.55±0.1 　　　　　 0 5.0±0.1 12.0±0.2 5.0±0.1 1.75±0.1 0.25±0.05 5.5±0.05 2.0±0.05 4.0±0.1 φ1.55±0.1 　　　　　 0 4.0±0.1 2.7±0.1 1.25±0.1 ●Absolute maximum ratings（Ta=25℃） Parameter Limits Symbol VRM Reverse voltage (repetitive) 30 VR Reverse voltage (DC) 30 Average rectified forward current (*1) 3 Io IFSM Forward current surge peak （60Hz・1cyc） 70 Junction temperature 150 Tj Storage temperature -55 to +150 Tstg (*1)Tc=105℃max Mounting on epoxi board. 180°Half sine wave Unit V V A A ℃ ℃ ●Electrical characteristics （Ta=25℃） Parameter Symbol VF Min. Typ. Max. Unit Forward voltage - - 0.45 V Reverse current IR - - 150 µA www.rohm.com ©2009 ROHM Co., Ltd. All rights reserved. 1/3 Conditions IF=3.0A VR=30V 2009.02 - Rev.B 　 RB050LA-30 1 Ta=150℃ Ta=25℃ Ta=-25℃ 0.1 0.01 Ta=75℃ 1000 Ta=25℃ 100 10 Ta=-25℃ 1 0.1 1000 100 10 0.01 0 100 200 300 400 500 600 0 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS 440 5 10 15 20 25 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 0 30 420 410 AVE:414.1mV 400 Ta=25℃ VR=30V n=30pcs 180 160 140 120 100 80 60 AVE:18.82uA 40 20 1030 1020 1010 1000 0 390 VF DISPERSION MAP 150 AVE:214.0A 100 980 970 AVE:1012.1pF 960 950 Ct DISPERSION MAP 50 300 30 Ta=25℃ IF=0.5A IR=1A Irr=0.25*IR n=10pcs 25 20 15 10 AVE:12.3ns 5 PEAK SURGE FORWARD CURRENT:IFSM(A) 8.3ms 200 RESERVE RECOVERY TIME:trr(ns) 1cyc Ifsm 250 990 IR DISPERSION MAP 300 Ifsm 250 8.3ms 8.3ms 1cyc 200 150 100 50 0 0 30 Ta=25℃ f=1MHz VR=0V n=10pcs 1040 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 430 5 10 15 20 25 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 1050 200 Ta=25℃ IF=3A n=30pcs REVERSE CURRENT:IR(uA) 0 1 10 100 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS trr DISPERSION MAP IFSM DISPERSION MAP 3 500 Ifsm 400 TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) 1000 t 300 200 100 0 0.1 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS www.rohm.com ©2009 ROHM Co., Ltd. All rights reserved. 100 Mounted on epoxcy board Rth(j-a) 100 FORWARD POWER DISSIPATION:Pf(W) FORWARD VOLTAGE:VF(mV) f=1MHz 10000 0.001 PEAK SURGE FORWARD CURRENT:IFSM(A) 10000 Ta=125℃ 100000 CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=125℃ REVERSE CURRENT:IR(uA) Ta=75℃ FORWARD CURRENT:IF(A) Ta=150℃ 1000000 10 PEAK SURGE FORWARD CURRENT:IFSM(A) Data Sheet 2 Rth(j-c) 10 IM=100mA IF=1A 1 D=1/2 Sin(θ＝180) DC 1 1mstime 300us 0.1 0.001 0 0.1 10 TIME:t(s) Rth-t CHARACTERISTICS 2/3 1000 0 1 2 3 4 5 AVERAGE RECTIFIED FORWARD CURRENT：Io(A) Io-Pf CHARACTERISTICS 2009.02 - Rev.B 　 RB050LA-30 7 2 DC D=1/2 1 Sin(θ＝180) 0 0 10 20 REVERSE VOLTAGE:VR(V) VR-PR CHARACTERISTICS 30 7 6 5 Io 0A 0V DC VR t D=1/2 4 T D=t/T VR=15V Tj=150℃ 3 2 Sin(θ＝180) 1 0 0 25 50 75 100 125 AMBIENT TEMPERATURE:Ta(℃) Derating Curveﾞ(Io-Ta) 150 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 3 REVERSE POWER DISSIPATION:PR (W) Data Sheet Io 0A 0V 6 VR t DC 5 4 T D=t/T VR=15V Tj=150℃ D=1/2 3 2 Sin(θ＝180) 1 0 0 25 50 75 100 125 150 CASE TEMPARATURE:Tc(℃) Derating Curveﾞ(Io-Tc) 30 ELECTROSTATIC DISCHARGE TEST ESD(KV) No break at 30kV 25 20 15 10 AVE:14.6kV 5 0 C=200pF R=0Ω C=100pF R=1.5kΩ ESD DISPERSION MAP www.rohm.com ©2009 ROHM Co., Ltd. All rights reserved. 3/3 2009.02 - Rev.B Appendix Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM CO.,LTD. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2009 ROHM Co.,Ltd. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster @ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix-Rev4.0