RB161L-40_2

RB161L-40 Diodes Schottky barrier diode RB161L-40 Applications General rectification Dimensions (Unit : mm) Land size figure (Unit : mm) 2.0 2.6±0.2 Features 1) Small power mold type. (PMDS) 2) Low VF. 3) High reliability. 2.0 ① ② 0.1±0.02 　　　 0.1 5.0±0.3 3 3 4.5±0.2 1.2±0.3 PMDS 1.5±0.2 2.0±0.2 Structure Construction Silicon epitaxial planar ROHM : PMDS JEDEC : SOD-106 Manufacture Date ① ② Taping specifications (Unit : mm) 4.0±0.1 2.0±0.05 φ1.55±0.05 1.75±0.1 0.3 5.5±0.05 φ1.55 2.9±0.1 4 .0±0.1 2.8MAX Absolute maximum ratings (Ta=25°C) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Average rectified forward current Forward current surge peak （60Hz・1cyc） Junction temperautre Storage tempereature Symbol VRM VR Io IFSM Tj Tstg (*1)Mounted on epoxy board. 180°Half sine wave Limits 40 20 1 70 125 -40 to +125 Unit V V A A ℃ ℃ Electrical characteristics (Ta=25°C) Parameter Forward voltage Reverse current Symbol VF IR Min. Typ. Max. 0.40 1 Unit V mA Conditions IF=1.0A VR=20V 5.3±0.1 　 0.05 9.5±0.1 12±0.2 4.2 Rev.H 1/3 RB161L-40 Diodes Electrical characteristic curves (Ta=25°C) Ta=75℃ 1 FORWARD CURRENT:IF(A) Ta=125℃ REVERSE CURRENT:IR(uA) 1000000 100000 10000 1000 Ta=25℃ 100 10 1 0 200 400 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS 600 5 10 15 20 25 30 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS Ta=℃ Ta=150℃ Ta=125℃ Ta=75℃ 1000 f=1MHz CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=150℃ 0.1 Ta=25℃ Ta=-25℃ 0.01 100 10 0.001 1 0 5 10 15 20 25 30 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 370 FORWARD VOLTAGE:VF(mV) REVERSE CURRENT:IR(uA) 360 350 340 AVE:347.7mV 330 320 VF DISPERSION MAP Ta=25℃ IF=1A n=30pcs 500 450 400 350 300 250 200 150 100 50 0 IR DISPERSION MAP AVE:110.3uA CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=25℃ VR=20V n=30pcs 300 290 280 270 260 250 240 230 220 210 200 Ct DISPERSION MAP AVE:251.8pF Ta=25℃ f=1MHz VR=0V n=10pcs 150 RESERVE RECOVERY TIME:trr(ns) PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm 100 1cyc 8.3ms 20 PEAK SURGE FORWARD CURRENT:IFSM(A) Ta=25℃ IF=0.5A IR=1A Irr=0.25*IR n=10pcs 200 Ifsm 150 8.3ms 8.3ms 1cyc 15 10 100 50 AVE:127.0A 0 IFSM DISPERSION MAP 5 AVE:9.3ns 0 trr DISPERSION MAP 50 0 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 200 PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm 150 t 1000 TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) Mounted on epoxy board 100 Rth(j-a) FORWARD POWER DISSIPATION:Pf(W) 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0.1 1 10 100 TIME:t(s) Rth-t CHARACTERISTICS 1000 0 0.5 1 1.5 AVERAGE RECTIFIED FORWARD CURRENT：Io(A) Io-Pf CHARACTERISTICS 2 D=1/2 DC Sin(θ＝180) 100 10 IM=100mA Rth(j-c) IF=0.5A 50 1 1ms time 300us 0 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 0.1 0.01 Rev.H 2/3 RB161L-40 Diodes 50 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 10 20 30 40 3 0A 0V DC D=1/2 Io t T VR D=t/T VR=20V Tj=125℃ AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 2.5 2 1.5 D=1/2 1 0.5 0 0 25 50 75 100 AMBIENT TEMPERATURE:Ta(℃) Derating Curveﾞ(Io-Ta) 125 0 25 50 75 100 CASE TEMPARATURE:0T(℃) Derating Curveﾞ(Io-Tc) 125 Sin(θ＝180) DC 0A 0V Io t T VR D=t/T VR=20V Tj=125℃ 30 D=1/2 DC 20 10 Sin(θ＝180) AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 40 REVERSE POWER DISSIPATION:PR (W) Sin(θ＝180) 0 REVERSE VOLTAGE:VR(V) VR-PR CHARACTERISTICS 30 No break at 30kV 25 ELECTROSTATIC DISCHARGE TEST ESD(KV) 20 15 10 5 0 C=200pF R=0Ω C=100pF R=1.5kΩ AVE:12.3kV ESD DISPERSION MAP Rev.H 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0