RB520G-30

RB520G-30 Diodes Schottky barrier diode RB520G-30 Applications Low current rectification Dimensions (Unit : mm) 0.6±0.05 0.13±0.03 Land size figure (Unit : mm) 0.5 0.5 Features 1) Ultra Small mold type. (VMD2) 2) Low IR. 3) High reliability. 1.0±0.05 1.4±0.05 V MD2 0.27±0.03 0.5±0.05 Structure Construction Silicon epitaxial planar ROHM : VMD2 dot (year week factory) Taping specifications (Unit : mm) 0.18±0.05 4±0.1 2±0.05 φ1.5+0.1 　　　　　0 1.75±0.1 3.5±0.05 1.11±0.05 2.1±0.1 φ0.5 0.76±0.1 4±0.1 2±0.05 0.4 8.0±0.3 0.1 1.2 0.3 0.65±0.05 Absolute maximum ratings (Ta=25°C) Parameter Reverse voltage(DC) Average rectified forward current Forward current surge peak （60Hz・1cyc） Junction temperature Storage temperature Symbol VR Io IFSM Tj Tstg Limits 30 100 500 125 -40 to +125 Unit V mA mA ℃ ℃ Electrical characteristics (Ta=25°C) Param eter Forward voltage Revers e current S ym bol VF IR Min. Typ. Max. 0.45 0.5 Unit V µA IF=10m A VR =10V Conditions Rev.C 1/3 RB520G-30 Diodes Electrical characteristic curves (Ta=25°C) 1000 FORWARD CURRENT:IF(mA) REVERSE CURRENT:IR(nA) 100 10 1 0.1 0.01 0.001 0 100 200 300 400 500 600 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS Ta=125℃ Ta=75℃ 1000000 Ta=125℃ 100000 Ta=75℃ 10000 1000 100 10 1 0.1 0 10 20 30 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS Ta=-25℃ Ta=25℃ CAPACITANCE BETWEEN TERMINALS:Ct(pF) 100 f=1MHｚ Ta=-25℃ Ta=25℃ 10 1 0 5 10 15 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 20 370 FORWARD VOLTAGE:VF(mV) 360 350 340 330 320 VF DISPERSION MAP Ta=25℃ VF=10mA n=30pcs 1000 900 REVERSE CURRENT:IR(nA) 800 700 600 500 400 300 200 100 0 AVE:100.5nA CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=25℃ VR=10V n=30pcs 20 19 18 17 16 15 14 13 12 11 10 AVE:16.28pF Ta=25℃ f=1MHz VR=0V n=10pcs AVE:347.5mV IR DISPERSION MAP Ct DISPERSION MAP 20 PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm 15 8.3ms 10 AVE:4.20A 5 1cyc 10 PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm 8.3ms 8.3ms 1cyc 5 PEAK SURGE FORWARD CURRENT:IFSM(A) 10 Ifsm t 5 0 0 1 IFSM DISRESION MAP 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 0 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 1000 TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) Rth(j-a) 0.1 0.08 FORWARD POWER DISSIPATION:Pf(W) D=1/2 0.06 Sin(θ＝180) 0.04 0.02 0 0.1 10 1000 0 TIME:t(s) Rth-t CHARACTERISTICS 0.05 0.1 0.15 AVERAGE RECTIFIED FORWARD CURRENT：Io(A) Io-Pf CHARACTERISTICS 0.2 Rth(j-c) 0.02 100 REVERSE POWER DISSIPATION:PR (W) DC 0.015 Mounted on epoxy board IM=10mA IF=100mA 0.01 DC Sin(θ＝180) 0 0 5 10 15 20 25 30 REVERSE VOLTAGE:VR(V) VR-PR CHARACTERISTICS D=1/2 1ms time 0.005 300us 10 0.001 Rev.C 2/3 RB520G-30 Diodes 0.3 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 0A 0V 0.2 DC D=1/2 0.1 Sin(θ＝180) 0 0 25 50 75 100 125 AMBIENT TEMPERATURE:Ta(℃) Derating Curveﾞ(Io-Ta) Io t T VR D=t/T VR=15V Tj=125℃ 0.3 0A 0V 0.2 DC D=1/2 0.1 Sin(θ＝180) 0 0 25 50 75 100 125 CASE TEMPARATURE:Tc(℃) Derating Curveﾞ(Io-Tc) Io t T VR D=t/T VR=15V Tj=125℃ Rev.C 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1