RCN02

RCN02 Resistors Chip Attenuators (π type) RCN02 Features 1) Compare with single type 2) Guarantee the attenuation (±0.3db, ±0.5db) 3) Mounting area 50% less 4) Big reduction for mounting cost (3 times → Once) 5) ISO9001- / ISO/TS 16949-approved Quick reference The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specifications. Part No. Size code 1010 (0404) No. of terminals No. of elements Rated power (70°C) 0.04W / package Impedance 50Ω Voltage standing wave ratio Operating temperature range (°C) −55 to +125 RCN02 4 3 MAX 1.3 Dimensions (Unit: mm) Marking (Terminal No.4) 1.0 0.1 ± 0.25 0.1 0.2 0.1 1.0 0.1 Equivalent Circuit Diagram 4 R1 R2 R2 1 2 3 ± +0.1 0.33 −0.05 +0.05 0.34 −0.1 ± 0.35 0.1 ± ± Rev.C 1/2 RCN02 Resistors Part No. Explanation RCN02M1 Part No. PPEA3 Circuit Code Specification PPE 5003 Attenuation, Attenuation limitation Code A3 5001 A3 5002 A3 5003 A3 5004 A3 5005 A5 5006 A5 5007 A5 5008 A5 5009 A5 5010 A8 5011 A8 5012 A8 5013 B5 5014 B5 5015 B5 5016 C0 5017 C0 5018 C0 5019 C5 5020 Attenuation 1dB 2dB 3dB 4dB 5dB 6dB 7dB 8dB 9dB 10dB 11dB 12dB 13dB 14dB 15dB 16dB 17dB 18dB 19dB 20dB Limitation π Circuit ±0.3dB Packaging Specifications Code Part No. M1 Packaging specifications Paper tape (2mm Pitch) Reel φ180mm (7in.) Basic ordering unit (pcs) 10,000 Reel (φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B" ±0.5dB ±0.8dB ±1.5dB ±2.0dB ±2.5dB Packaging Reel Taping P0 P2 φD 0 E A0 B0 F W 02 04 06 08 08 06 04 A B D 02 P1 Heat crimp cover / Tape Chip attenuator Thick paper mount (Underside paper tape) Feeding direction Square punchout hole T2 C Label EIAJ ET-7200B compliant (Unit : mm) W 8.0±0.3 D0 +0.1 φ1.5 0 F 3.5±0.05 P0 4.0±0.1 E 1.75±0.1 P1 2.0±0.1 A0 1.17±0.1 P2 2.0±0.05 B0 1.17±0.1 T2 Max. 0.5 (Unit : mm) A φ180 0 −1.5 B φ60 +1 0 9 C +1.0 0 D φ13±0.2 Caution : Insertion direction of device to carrier tape. Marking is on the left bottom side of the cavity to the feeding direction. Rev.C 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0