RF073M2S

RF073M2S Diodes Fast recovery diode RF073M2S Applications High frequency rectification External dimensions (Unit : mm) 0.80 + 0.1 − 1.6 + 0.1 − Features 1) Small power mold type (PMDS) 2) Ultra low VF 3) Very fast recovery 4) Low switching loss CATHODE MARK 2.6 + 0.1 − 0.9 + 0.1 − 3.5 + 0.2 − 68 ROHM : PMDU 0.1+ 0.1 − 0.05 Construction Silicon epitaxial planar Absolute maximum ratings (Ta=25°C) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Forward voltage (DC) Average rectified forward current Forward peak surge current (60Hz . 1cyc.) Junction temperature Storage temperature ∗ Tc max=120°C Mounting on glass epoxi board Symbol VRM VR IF ∗ IO ∗ IFSM Tj Tstg Limits 200 200 1.0 0.7 15 150 −55 to +150 Unit V V A A A °C °C Electrical characteristics (Ta=25°C) Parameter Forward voltage Reverse current Reverse recovery time Symbol VF IR trr Min. − − − Typ. 0.830 1.2 9 Max. 0.890 10 20 Unit V µA ns IF=0.7A VR=200V IF=0.5A, IR=1.0A, Irr=0.25 IR Conditions + Note) ESD sensitive product handing required. 1/2 RF073M2S Diodes Electrical characteristic curves (Ta=25°C) 1 FORWARD CURRENT : IF (A) REVERSE CURRENT : IR (µA) AVERAGE RECTIFIED CURRENT : IO (A) 1000 125°C 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 D=1/2 Sin(θ=180) DC IO 0A 0V VR t 100 75°C T 0.1 D=t / T VR=200V Tj=150°C 125°C 75°C 10 25°C 25°C −25°C 1 0.01 0.1 −25°C 0.001 0 0.2 0.4 0.6 0.8 1 0.01 0 50 100 150 200 FORWARD VOLTAGE : VF (V) REVERSE VOLTAGE : VR (V) AMBIENT TEMPERATURE : Ta (°C) Fig.1 Forward temperature characteristics Fig.2 Reverse temperature characteristics Fig.3 Derating curve SURGE FORWARD CURRENT : IFSM (A) sin wave 0.8 DC 8.3ms 8.3ms 15 1cycle 0.6 Sin(θ=180) D=1/2 CAPACITANCE BETWEEN TERMINALS : CT (pF) FORWARD POWER DISSIPATION : Pf (W) 1.0 20 IFSM 100 10 10 0.4 0.2 5 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 1 10 CYCLE 100 0 0 5 10 15 20 25 30 AVERAGE RECTIFIED FORWARD CURRENT : IO (A) REVERSE VOLTAGE : VR (V) Fig. 4 Power dissipation characteristics Fig.5 Forward peak surge current Fig. 6 Capacitance between terminals characteristics 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0