RF101L4S

Fast Recovery Diode RF101L4S  Applications General rectification  Dimensions (Unit : mm)  Land size figure (Unit : mm) 2.0  Features 1)Small power mold type. (PMDS) 2)Ultra low VF 3)Ultra high switching speed 4)Low switching loss 8 6 ① 2.0 2.6±0.2 ② 0.1±0.02 　　　 0.1 5.0±0.3 8 6 4.5±0.2 1.2 ±0.3 PMDS  Construction Silicon epitaxial planar 1.5±0.2 2.0±0.2  Structure ROHM : PMDS JEDEC : SOD-106 ① ② Manufacture date  Taping dimensions (Unit : mm) 4.0±0.1 2.0±0.05 φ1.55±0.05 1.75±0.1 0.3 5.5±0.05 φ1.55 2.9±0.1 4.0±0.1 2.8MAX  Absolute maximum ratings (Ta=25°C) Parameter Symbol Reverse voltage (repetitive) Reverse voltage (DC) Average rectified forward current (*1) Forward current surge peak (60Hz 1cyc) ・ Limits 400 400 1 25 150 55 to 150 Unit V V A A °C °C VRM VR Io IFSM Tj Tstg Junction temperature Storage temperature (*1)Mounted on epoxy board. 180°Half sine wave  Electrical characteristics (Ta=25°C) Parameter Forward voltage Reverse current Reverse recovery time Symbol VF IR Min. - Typ. - Max. 1.25 10 25 Unit V μA ns IF=1.0A 5.3±0.1 　 0.05 9.5±0.1 Conditions VR=400V IF=0.5A,IR=1A,Irr=0.25*IR trr www.rohm.com ©2011 ROHM Co., Ltd. All rights reserved. 1/3 12±0.2 2011.06 - Rev.B 4.2 RF101L4S  Electrical characteristics curves Data Sheet 1 10000 Ta=150℃ REVERSE CURRENT:IR(nA) Ta=125℃ Ta=75℃ Ta=25℃ 10 Ta=-25℃ 100 f=1MHz CAPACITANCE BETWEEN TERMINALS:Ct(pF) FORWARD CURRENT:IF(A) Ta=125℃ 0.1 Ta=150℃ Ta=75℃ Ta=25℃ Ta=-25℃ 0.01 1000 100 10 1 0.001 0 200 400 600 800 1000 1200 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS 0.1 0 50 100 150 200 250 300 350 400 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 1 0 5 10 15 20 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 25 30 1300 500 100 Ta=25℃ VR=400V n=30pcs 90 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 80 70 60 50 40 30 20 10 0 IR DISPERSION MAP Ct DISPERSION MAP AVE:41.8pF Ta=25℃ f=1MHz VR=0V n=10pcs FORWARD VOLTAGE:VF(mV) REVERSE CURRENT:IR(nA) 1200 Ta=25℃ IF=1A n=30pcs 450 400 350 300 250 200 150 100 50 1100 1000 AVE:24.8nA 900 AVE:1007mV 800 0 VF DISPERSION MAP 200 30 1000 PEAK SURGE FORWARD CURRENT:IFSM(A) Ta=25℃ IF=0.5A IR=1A Irr=0.25*IR n=10pcs AVE:18.4ns PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm 150 1cyc 8.3ms REVERSE RECOVERY TIME:trr(ns) 25 20 15 10 5 0 Ifsm 100 8.3ms 8.3ms 1cyc 100 AVE:48.0A 50 10 0 1 trr DISPERSION MAP Mounted on epoxy board 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 IFSM DISRESION MAP 1000 1000 Ifsm TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) t IM=10mA IF=100mA 3 DC 2.5 FORWARD POWER DISSIPATION:Pf(W) 2 1.5 1 0.5 Sin(θ＝180) PEAK SURGE FORWARD CURRENT:IFSM(A) 1m time Rth(j-a) D=1/2 100 300u 100 10 Rth(j-c) 1 10 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 0.1 0.001 0 0.01 1 10 100 TIME:t(s) Rth-t CHARACTERISTICS 0.1 1000 0 0.5 1 1.5 2 www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 2/3 2011.06 - Rev.B RF101L4S Data Sheet 2 0A 0V AVERAGE RECTIFIED FORWARD CURRENT:Io(A) D=1/2 1 DC Io AVERAGE RECTIFIED FORWARD CURRENT:Io(A) t T VR D=t/T VR=200V Tj=150℃ 3 30 ELECTROSTATIC DISCHARGE TEST ESD(KV) 0A 0V 2 Io t T VR D=t/T VR=200V Tj=150℃ 25 20 15 10 5 AVE：4.60kV AVE：16.3kV 1 Sin(θ＝180) 0 0 25 50 75 100 125 150 0 0 25 50 75 100 125 150 0 C=200pF R=0Ω C=100pF R=1.5kΩ AMBIENT TEMPERATURE:Ta(℃) Derating Curveﾞ(Io-Ta) CASE TEMPARATURE:Tc(℃) Derating Curveﾞ(Io-Tc) ESD DISPERSION MAP www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 3/3 2011.06 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. R1120A