RHP030N03

RHP030N03 Transistors 4V Drive Nch MOSFET RHP030N03 Structure Silicon N-channel MOSFET Dimensions (Unit : mm) MPT3 4.5 1.6 0.5 1.5 Features 1) Low On-resistance. 2) 4V drive. (1) (2) (3) 1.0 2.5 4.0 0.4 0.4 1.5 0.5 1.5 3.0 0.4 Applications Switching (1)Gate (2)Drain (3)Source Abbreviated symbol : KZ Packaging specifications Package Type RHP030N03 Code Basic ordering unit (pieces) Taping T100 1000 Inner circuit (3) (2) ∗2 ∗1 ∗1 ESD PROTECTION DIODE (1) ∗2 BODY DIODE (1) Source (2) Gate (3) Drain Absolute maximum ratings (Ta=25°C) Parameter Drain-source voltage Gate-source voltage Drain current Reverse drain current Total power dissipation Channel temperature Range of storage temperature ∗1 Pw≤10µs, Duty cycle≤1% ∗2 When mounted on a 40×40×0.7mm ceramic board Continuous Pulsed Continuous Pulsed Symbol VDSS VGSS ID IDP ∗1 IDR IDRP ∗1 PD Tch Tstg Limits 30 ±20 3 10 3 10 500 2 ∗2 150 −55 to +150 Unit V V A A A A mW W °C °C Thermal resistance Parameter Channel to ambient ∗ When mounted on a 40×40×0.7mm ceramic board Symbol Rth(ch-a) Limits 250 62.5 ∗ Unit °C/W °C/W Rev.A 1/3 RHP030N03 Transistors Electrical characteristics (Ta=25°C) Parameter Symbol IGSS Gate-source leakage Drain-source breakdown voltage V(BR) DSS IDSS Zero gate voltage drain current Gate threshold voltage VGS (th) Static drain-source on-state resistance Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Total gate charge Gate-source charge Gate-drain charge ∗Pulsed RDS (on)∗ Yfs Ciss Coss Crss td (on) tr td (off) tf Qg Qgs Qgd ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ Min. − 30 − 1.0 − − 2.0 − − − − − − − − − − Typ. − − − − 90 160 − 160 90 27 7 11 15 4.5 6.5 1.0 1.5 Max. ±10 − 1 2.5 120 210 − − − − − − − − − − − Unit µA V µA V mΩ mΩ S pF pF pF ns ns ns ns nC nC nC Conditions VGS=±20V, VDS=0V ID= 1mA, VGS=0V VDS= 30V, VGS=0V VDS= 10V, ID= 1mA ID= 3A, VGS= 10V ID= 3A, VGS= 4V VDS= 10V, ID= 3A VDS= 10V VGS=0V f=1MHz VDD 15V ID= 1.5A VGS= 10V RL=10Ω RG=10Ω VDD 15V VGS= 10V ID= 3A Rev.A 2/3 RHP030N03 Transistors Electrical characteristics curves 1000 Ta=25°C f=1MHz VGS=0V Ciss 1000 CAPACITANCE : C (pF) DRAIN CURRENT : ID (A) SWITCHING TIME : t (ns) 100 Coss Ta=25°C VDD= 15V VGS= 10V RG=10Ω Pulsed 10 VDS=10V Pulsed Ta=125°C 75°C 25°C −25°C 100 1 Crss tf td (off) 10 10 td (on) tr 0.1 1 0.01 0.1 1 10 100 1 0.01 0.01 0.1 1 10 0 0.5 1 1.5 2 2.5 3 3.5 DRAIN-SOURCE VOLTAGE : VDS (V) DRAIN CURRENT : ID (A) GATE-SOURCE VOLTAGE : VGS (V) Fig.1 Typical Capacitance vs. Drain-Source Voltage Fig.2 Switching Characteristics Fig.3 Typical Transfer Characteristics 0.5 REVERSE DRAIN CURRENT : IDR (A) STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS (on) (Ω) 0.4 ID=3.0A 1 Ta=125°C Ta=75°C Ta=25°C Ta= −25°C REVERSE DRAIN CURRENT : IDR (A) Ta=25°C Pulsed 10 VGS=0V Pulsed 10 Ta=25°C Pulsed 1 VGS=10V 0.3 1.5A 0.1 0.1 0V 0.2 0.01 0.01 0.1 0 0 2 4 6 8 10 12 14 0.001 0 0.2 0.4 0.6 0.8 1 1.2 1.4 0.001 0 0.2 0.4 0.6 0.8 1 1.2 GATE-SOURCE VOLTAGE : VGS (V) SOURCE-DRAIN VOLTAGE : VSD (V) SOURCE-DRAIN VOLTAGE : VSD (V) Fig.4 Static Drain-Source On-State Resistance vs. Gate-Source Voltage Fig.5 Reverse Drain Current vs. Source-Drain Voltage ( Ι ) Fig.6 Reverse Drain Current vs. Source-Drain Voltage ( ΙΙ ) GATE THRESHOLD VOLTAGE : VGS (th) (V) STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS (on) (Ω) VGS=10V Pulsed Ta=125°C Ta=75°C Ta=25°C Ta= −25°C STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS (on) (Ω) 1 1 VGS=4V Pulsed 2.5 2 VSD=10V ID=1mA Pulsed 1.5 0.1 0.1 Ta=125°C Ta=75°C Ta=25°C Ta= −25°C 1 0.5 0.01 0.01 0.1 1 10 0.01 0.01 0.1 1 10 0 -50 -25 0 25 50 75 100 125 150 DRAIN CURRENT : ID (A) DRAIN CURRENT : ID (A) CHANNEL TEMPERATURE : Tch (°C) Fig.7 Static Drain-Source On-State Resistance vs. Drain Current ( Ι ) Fig.8 Static Drain-Source On-State Resistance vs. Drain Current ( ΙΙ ) Fig.9 Gate Threshold Voltage vs. Channel Temperature Rev.A 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1