RN142G

RN142G Diodes PIN diode RN142G Applications High frequency switching External dimensions (Unit : mm) 0.6±0.05 0.13±0.03 Land size figure (Unit : mm) 0.5 0.5 1.0±0.05 1.4±0.05 Features 1) Ultra small mold type. (VMD2) 2) High frequency resistance which is small and low capacity. VMD2 Construction Silicon epitaxial planar 0.27 ±0 .0 3 0.5±0.05 Structure ROHM : VMD2 do t (year week fac to ry) Taping specifications(Unit : mm) 0.1 8±0.0 5 4±0.1 2±0.05 φ1.5+ 0.1 　　　　　0 1.75 ±0.1 3.5±0.05 1.1 1±0 .05 2.1±0.1 φ0.5 0.7 6±0.1 4±0 .1 2±0.05 0.4 8.0 ±0.3 0.1 0.3 0.65 ±0 .05 Absolute maximum ratings (Ta=25°C) Parameter Reverse voltage Reverse current Junction temperature Storage temperature Symbol VR IF Tj Tstg Limits 60 100 150 -55 to +150 Unit V mA ℃ ℃ Electrical characteristics (Ta=25°C) Parameter Symbol VF Forward voltage IR Reverse current Capacitance between terminals High frequency resistance Ct Rf Min. - Typ. - Max. 1 0.1 0.45 3 2 Unit V µA pF Ω Ω Conditions IF=10mA VR=60V VR=1V , f=1MHz IF=3mA,f=100MHz IF=10mA,f=100MHz Rev.A 1.2 1/2 RN142G Diodes Electrical characteristic curves (Ta=25°C) 100 1000 Ta=150℃ Ta=125℃ 10 f=1MHz FORWARD CURRENT:IF(mA) REVERSE CURRENT:IR(nA) Ta=150℃ 10 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 100 Ta=125℃ Ta=75℃ Ta=25℃ Ta=-25℃ 1 10 Ta=75℃ 1 Ta=25℃ 1 0.1 0.1 Ta=-25℃ 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 0.01 0 10 FORWARD VOLTAGE：VF(V) VF-IF CHARACTERISTICS 20 3 0 4 0 50 60 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 70 80 0.01 0 10 20 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 30 100 1 850 10 CAPACITANCE BETWEEN TERMINALS:Ct(pF) f=1MHz f=10MHz FORWARD VOLTAGE:VF(mV) Ta=25℃ VR=0V FORWARD OPERATING RESISTANCE:rf(Ω) 840 Ta=25℃ IF=10mA n=30pcs 830 f=100MHz 1 820 AVE:828.3mV 810 0.1 0.1 1 10 0.1 800 FORWARD CURRENT:IF(mA) rf-IF CHARACTERISTICS 1 10 100 FREQUENCY(MHz) Ct-f CHARACTERISTICS 1000 VF DISPERSION MAP 10 9 Ta=25℃ VR=60V n=30pcs 1 0.9 Ta=25℃ f=1MHz VR=1V n=10pcs 2 1.9 Ta=25℃ f=100MHz IF=3mA n=10pcs REVERSE CURRENT:IR(nA) CAPACITANCE BETWEEN TERMINALS:Ct(pF) 7 6 5 4 3 2 1 0 IR DISPERSION MAP AVE:0.4448nA 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Ct DISPERSION MAP AVE:0.364pF FORWARD OPERATING RESISTANCE:rf(Ω) 8 0.8 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1 AVE:1.206Ω FORWARD CURRENT:IF(mA) rf DISPERSION MAP 1 0.9 0.8 5 Ta=25℃ f=100MHz IF=10mA n=10pcs 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 ELECTROSTATIC DISCHARGE TEST ESD(KV) 4 AVE:2.01kV FORWARD OPERATING RESISTANCE:rf(Ω) 3 2 AVE:0.71kV 1 C=200pF R=0Ω C=100pF R=1.5kΩ AVE:0.639Ω 0 FORWARD CURRENT:IF(mA) rf DISPERSION MAP ESD DISPERSION MAP Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1