RN242CS_09

PIN diode RN242CS Applications High frequency switching Dimensions (Unit : mm) Lead size figure (Unit : mm) 0.55 0.45 Features 1) Ultra small mold type. (VMN2) 2) Low high frequency resistance and lowcapacitance VMN2 Structure Construction Silicon epitaxial planer Taping dimensions (Unit : mm) Absolute maximum ratings (Ta=25°C) Parameter Symbol Reverse voltage(DC) Forward current Junction temperature Storage temperature VR IF Tj Tstg Limits 30 100 150 -55 to +150 Unit V mA °C °C Electrical characteristics (Ta=25°C) Parameter Symbol Forward voltage Reverse current Capacitance between terminals High frequency resistance VF IR Ct Rf Min. - Typ. - Max. 1 0.1 0.35 3 1.5 Unit V µA pF Ω Ω 0.45 Conditions IF=10mA VR=30V VR=1V , f=1MHz IF=3mA,f=100MHz IF=10mA,f=100MHz www.rohm.com ©2009 ROHM Co., Ltd. All rights reserved. 1/2 2009.12 - Rev.B 0.5 RN242CS Electrical characteristic curves 100 　 Data Sheet 1000 Ta=150 ° C 100 REVERSE CURRENT:IR(nA) 10 1 0.1 0.01 Ta=150 ° C Ta=125 ° C 10 f=1MHz CAPACITANCE BETWEEN TERMINALS:Ct(pF) FORWARD CURRENT:I F(mA) 10 Ta=125 ° C Ta=75° C Ta=75° C 1 Ta=25° C 1 Ta=25° C Ta=-25° C 0.1 Ta=-25° C 0.1 0 100 200 300 400 500 600 700 800 900 1000 1100 0.001 0 5 FORWARD VOLTAGE : V F(mV) VF-IF CHARACTERISTICS 10 15 20 25 REVERSE VOLTAGE : V R(V) VR-IR CHARACTERISTICS 30 0.01 0 1 2 3 4 5 6 7 8 REVERSE VOLTAGE : V R(V) VR-Ct CHARACTERISTICS 9 10 100 1 Ta=25° C VR=0V f=10MHz CAPACITANCE BETWEEN TERMINALS:Ct(pF) 860 Ta=25° C IF=10mA n=30pcs f=1MHz FORWARD OPERATING RESISTANCE:rf(Ω) 10 FORWARD VOLTAGE:V F(mV) 850 840 f=100MHz 1 830 820 AVE:831.2mV 0.1 0.1 1 FORWARD CURRENT:IF(mA) rf-IF CHARACTERISTICS 10 0.1 1 10 100 1000 FREQUENCY(MHz) Ct-f CHARACTERISTICS 810 VF DISPERSION MAP 0.5 Ta=25° C VR=30V n=30pcs 0.5 Ta=25° C f=1MHz VR=1V n=10pcs 2 1.9 FORWARD OPERATING RESISTANCE:rf(Ω) 1.8 1.7 1.6 1.5 1.4 1.3 1.2 AVE:0.256pF 1.1 1 Ct DISPERSION MAP FORWARD CURRENT:IF(mA) rf DISPERSION MAP AVE:1.595 Ω Ta=25° C f=100MHz IF=3mA n=10pcs REVERSE CURRENT:IR(nA) 0.3 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 0.4 0.4 0.3 0.2 AVE:0.06169nA 0.1 0.2 0.1 0 IR DISPERSION MAP 0 1.5 1.4 1.3 FORWARD OPERATING RESISTANCE:rf(Ω) 1.2 1.1 1 0.9 0.8 0.7 0.6 0.5 FORWARD CURRENT:IF(mA) rf DISPERSION MAP AVE:0.975 Ω Ta=25° C f=100MHz IF=10mA n=10pcs 5 ELECTROSTATIC DDISCHARGE TEST ESD(KV) 4 AVE:2.47kV 3 AVE:0.63kV 2 1 C=200pF R=0Ω C=100pF R=1.5kΩ 0 ESD DISPERSION MAP www.rohm.com ©2009 ROHM Co., Ltd. All rights reserved. 2/2 2009.12 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. R0039A