RN771V

RN771V Diodes PIN diode RN771V Applications For AGC, Switching. Dimensions (Unit : mm) 1.25±0.1 0.1±0.1 　　　 0.05 Land size figure (Unit : mm) 0.9MIN. Features 1) Small mold type. (UMD2) 2) High frequency resistance which is small and low capacity. 0.8MIN. 1.7±0.1 2.5±0.2 UMD2 Construction Silicon epitaxial planar 0 .3±0.05 0.7±0.2 　　　 0.1 Structure ROHM : UMD2 JEDEC : S0D-323 JEITA : SC-90/A dot (year week factory) Taping dimensions (Unit : mm) 4 .0±0.1 2.0±0.05 φ1.55±0.05 1.75±0.1 0.3±0.1 3.5±0.05 8.0±0.2 1.40±0.1 4.0±0.1 φ1.05 1.0±0.1 Absolute maximum ratings (Ta=25°C) Parameter Symbol VR Reverse voltage (DC) IF Reverse current (DC) Junction temperature Tj Storage temperature Tstg Electrical characteristics (Ta=25°C) Parameter Forward voltage Reverse current Capacitance between terminals High frequency resistance Symbol VF IR Ct Rf Limits 50 50 150 -55 to +150 Unit V mA ℃ ℃ 2.75 2.8±0.1 Min. - Typ. - Max. 1 0.1 0.9 7 Unit V µA pF Ω Conditions IF=１0mA VR=50V VR=35V , f=1MHz IF=10mA,f=100MHz Rev.A 2.1 1/2 RN771V Diodes Electrical characteristic curves (Ta=25°C) 100 100000 Ta=75℃ Ta=150℃ 10000 REVERSE CURRENT:IR(nA) 1000 Ta=75℃ 100 Ta=25℃ 10 Ta=-25℃ 1 0.1 0 100 200 300 400 500 600 700 800 900 1000 1100 10 f=1MHz CAPACITANCE BETWEEN TERMINALS:Ct(pF) 50 FORWARD CURRENT:IF(mA) Ta=125℃ 10 Ta=125℃ Ta=150℃ 1 Ta=25℃ Ta=-25℃ 1 0.1 0.1 0 10 20 30 40 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 0 5 10 15 20 25 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 30 35 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS 10000 10 800 FORWARD VOLTAGE:VF(mV) Ta=25℃ VR=0V 1000 CAPACITANCE BETWEEN TERMINALS:Ct(pF) FORWARD OPERATING RESISTANCE:rf(Ω) 780 AVE:782.8mV 760 Ta=25℃ IF=10mA n=30pcs 100MHz 100 1 740 1MHz 10 10MHz 720 1 0.01 0.1 0.1 1 10 700 0.1 1 10 FORWARD CURRENT:IF(mA) rf-IF CHARACTERISTICS FREQUENCY(MHz) Ct-f CHARACTERISTICS VF DISPERSION MAP 100 90 REVERSE CURRENT:IR(nA) 80 70 60 50 40 30 20 10 0 IR DISPERSION MAP AVE：26.8nA Ta=25℃ VR=50V n=30pcs 0.6 Ta=25℃ f=1MHz VR=35V n=30pcs 5 Ta=25℃ f=100MHz IF=10mA n=30pcs CAPACITANCE BETWEEN TERMINALS:Ct(pF) FORWARD OPERATING RESISTANCE:rf(Ω) 4 AVE:4.12Ω 3 0.5 2 0.4 1 AVE:0.44pF 0.3 Ct DISPERSION MAP 0 FORWARD CURRENT:IF(mA) rf DISPERSION MAP 4 ELECTROSTATIC DDISCHARGE TEST ESD(KV) 3 AVE:3.44kV 2 AVE:2.67kV 1 AVE:1.48kV C=200pF R=0Ω C=150pF R=330Ω C=100pF R=1.5kΩ 0 ESD DISPERSION MAP Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0