RN779F

RN779F Diodes PIN diode RN779F Applications For AGC, Switching. External dimensions (Unit : mm) 2.0± 0.2 0.3± 0.1 各リー ドとも Each lead has same dimension 同寸法 (3) 0.15± 0 .0 5 Land size figure (Unit : mm) 1.3 Features 1) Small mold type. (UMD3) 2) High-frequency resistance witch is small and low capacity. (2 ) （0. 65） 1. 25 ±0 .1 2.1±0. 1 0.9MIN. 0.65 0～ 0. 1 ( 1) （0. 65） 0. 7± 0 . 1 0.9± 0 .1 0.1Min 0.8MIN . UMD3 Construction Silicon epitaxial planar 1.3± 0. 1 Structure ROHM : UMD3 JEDEC : SOT- 323 JEITA : S C- 7 0 do t (ye ar we e k fac to ry) Taping dimensions (Unit : mm) 4.0±0.1 2.0±0.05 φ1.55±0.05 0.3±0.1 1.75±0.1 3.5±0.05 8.0±0.2 2.4±0 .1 5.5±0 .2 2.25±0 .1 　　　　 0 4.0±0.1 φ0 .5 ±0.05 0～0 .1 2.4±0 .1 1.25±0.1 Absolute maximum ratings (Ta=25°C) Param eter Sym bol VR Reverse voltage (DC) IF Forward current (DC) Junction tem perature Tj Storage tem perature Tstg Electrical characteristics (Ta=25°C) Param eter Sym bol Forward voltage VF Reverse current IR Capacitance between term inals Ct High frequency resistance Rf Lim its 50 50 150 -55 to +150 Unit V mA ℃ ℃ Min. - Typ. - Max. 1 0.1 0.9 7 Unit V µA pF Ω Conditions IF=10m A VR=50V VR=35V , f=1MHz IF=10m A,f=100MHz 1.6 1/2 RN779F Diodes Electrical characteristic curves (Ta=25°C) 100 100000 Ta=150℃ Ta=75℃ 10000 10 f=1MHz FORWARD CURRENT:IF(mA) REVERSE CURRENT:IR(nA) 10 Ta=125℃ Ta=150℃ 1 Ta=25℃ Ta=-25℃ 1000 Ta=75℃ 100 Ta=25℃ 10 Ta=-25℃ 1 0.1 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 50 Ta=125℃ 1 0.1 0 100 200 3 00 40 0 500 600 700 80 0 9 00 1000 1100 0.1 0 10 20 30 40 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 0 5 10 15 20 25 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 30 35 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS 1 0000 10 Ta=25℃ VR=0V 800 FORWARD VOLTAGE:VF(mV) 1000 CAPACITANCE BETWEEN TERMINALS:Ct(pF) FORWARD OPERATING RESISTANCE:rf(Ω) 780 AVE:782.8mV Ta=25℃ IF=10mA n=30pcs 100MHz 100 760 1 740 1MHz 10 10MHz 1 0.01 720 0.1 0.1 1 10 700 0.1 1 10 FORWARD CURRENT:IF(mA) rf-IF CHARACTERISTICS FREQUENCY(MHz) Ct-f CHARACTERISTICS VF DISPERSION MAP 100 90 Ta=25℃ VR=50V n=30pcs 0.6 Ta=25℃ f=1MHz VR=35V n=30pcs 0.5 5 Ta=25℃ f=100MHz IF=10mA n=30pcs REVERSE CURRENT:IR(nA) CAPACITANCE BETWEEN TERMINALS:Ct(pF) 70 60 50 40 30 20 10 0 IR DISPERSION MAP AVE：26.8nA FORWARD OPERATING RESISTANCE:rf(Ω) 80 4 AVE:4.12Ω 3 2 0.4 1 AVE:0.44pF 0.3 Ct DISPERSION MAP 0 FORWARD CURRENT:IF(mA) rf DISPERSION MAP 4 ELECTROSTATIC DDISCHARGE TEST ESD(KV) 3 AVE:3.44kV 2 AVE:2.67kV 1 AVE:1.48kV C=200pF R=0Ω C=150pF R=330Ω C=100pF R=1.5kΩ 0 ESD DISPERSION MAP 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1