RPR-220PC30N_10

RPR-220PC30N Reflective photosensor (photoreflector) Absolute maximum ratings (Ta=25°C) Parameter Input (LED) Forward current Reverse voltage Power dissipation Collector-emitter voltage Emitter-collector voltage Collector current Collector power dissipation Operating temperature Storage temperature Symbol IF VR PD VCEO VECO IC PC Topr Tstg Limits 25 5 100 30 4.5 30 80 −25 to +85 −30 to +85 Unit mA V mW V V mA mW Applications Printers MFP (Multi-function Printer) (photo- ) transistor Output Features 1) A plastic lens is used for high sensitivity. 2) A built-in visible light filter minimizes the influence of stray light. 3) Lightweight and compact. °C °C Electrical and optical characteristics (Ta=25°C) Parameter Output Input charac- characteristics teristics Forward voltage Reverse current Dark current Peak sensitivity wavelength Collector current Collector-emitter saturation voltage Response time Light emitter diode Symbol VF IR ICEO Min. − − − − 0.08 − − − − − Typ. 3.5 − − 800 − 0.1 10 470 10 800 Max. 3.8 100 10 − 0.8 0.3 − − − − Unit V μA μA nm mA V μs nm μs nm Conditions IF=20mA VR=5V VCE=10V − VCE=2V, IF=10mA IF=20mA, IC=0.1mA VCE=10V, IF=20mA, RL=100Ω IF=20mA ∗ Non-coherent Infrared light emitting diode used. λP IC VCE(sat) tr tf λP tr tf Reflector ∗ Transfer characteristics d = 6mm ∗ ∗ Reflective photointerrupter Peak light emitting wavelength Response time Maximum sensitivity wavelength Photo transistor VCC=5V, IC=1mA, RL=100Ω ∗ This product is not designed to be protected against electromagnetic wave. λP − ∗ Reflector object : Standard white paper. (Reflection ratio = 90%) Electrical and optical characteristics curves RELATIVE COLLECTOR CURRENT : IC (%) 100 FORWARD CURRENT : IF (mA) 30 25 20 15 FORWARD CURRENT : IF (mA) 25 20 15 10 10 10 5 0 -40 -20 5 1 0 5 10 15 20 0 0 20 40 60 80 100 0 1 2 3 4 5 AMBIENT TEMPERATURE : Ta (°C) FORWARD VOLTAGE : VF (V) DISTANCE : d (mm) Fig.1 Relative output vs. distance POWER DISSIPATION / COLLECTOR POWER DISSIPTION : PD/PC (mW) RELATIVE FORWARD VOLTAGE : VF (%) 120 110 100 90 80 70 60 50 40 30 20 10 0 -40 -20 Fig.2 Forward current vs. ambient temperature 120 COLLECTOR CURRENT : IC (mA) 100 80 60 40 20 0 −30 −20 −10 0 10 20 30 40 50 60 70 80 90 AMBIENT TEMPERATURE : Ta (°C) 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 Fig.3 Forward current vs. forward voltage PD PC 0 20 40 60 80 100 5 10 15 20 25 AMBIENT TEMPERATURE : Ta (°C) FORWARD CURRENT : IF(mA) Fig.4 Power dissipation / collector power dissipation vs. ambient temperature Fig.5 Relative output vs. ambient temperature Fig.6 Collector current vs. forward current Dimensions (Unit : mm) 6.4 2.8 2-φ 2.2 2.8 Through hole 4.9 2.5 4-φ 1.0 0.35 6.5 1.4 2.95± 0.5 4-0.6 40.5± 0.1 (2.8) (2.5) Anode Collector Cathode Emitter Notes: 1. Unspecified tolerance shall be ± 0.2 . 2. Dimension in parenthesis are show for reference. 0.8 COLLECTOR CURRENT : IC (mA) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 1 2 3 4 5 6 7 IF=5mA IF=10mA IF=20mA 10000 1000 100 DARK CURRENT : ICEO (μA) IF=15mA 10 1 0.1 VCE=30V 20V 10V 8 9 10 0.01 −50 −25 0 25 50 75 100 COLLECTOR-EMITTER VOLTAGE : VCE (V) AMBIENT TEMPERATURE : Ta (°C) Fig.7 Output characteristics Fig.8 Dark current vs. ambient temperature 2010.06 Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. R1010A