RSA5M

RSA5M Diodes ESD Protection Device (TVS) RSA5M Applications ESD Protection Dimensions (Unit : mm) 1.6±0.1 0.1±0.1 　　　 0.05 Land size figure (Unit : mm) 1.2 0.85 Features 1) Small power mold type. (PMDU) 2) High reliability 2.6±0.1 3.5±0.2 Construction Silicon epitaxial planar PMDU 0.9±0.1 ROHM : PMDU JEDEC :SOD-123 Manufacture Date 0.8±0.1 Structure Taping dimensions (Unit : mm) 4.0±0.1 2.0±0.05 φ1.55±0.05 1.75±0.1 0.25±0.05 3.5±0.05 8.0±0.2 1.81±0.1 4.0±0.1 φ1.0±0.1 3.71±0.1 1.5MAX Absolute maximum ratings (Ta=25°C) Parameter Symbol Peak pulse power(tp=10×1000us) Ppk Stand off power VRMN Junction temperature Tj Storage temperature Tstg Limits 200 5 150 -55 to +150 Unit W V ℃ ℃ Electrical characteristic (Ta=25°C) Parameter Breakdown voltage Clamping voltage Reverse current Symbol VBR VC IR Min. 6.4 - Typ. - Max. 7.0 9.2 400 Unit V V uA Conditions IR=10.0mA Ipp=21.7A VRMN=5.0V 3.05 ① 1/2 RSA5M Diodes Electrical characteristic curves 10 Ta=75℃ Ta=25℃ ZENER CURRENT:Iz(mA) Ta=125℃ 10000 10 f=1MHz CAPACITANCE BETWEEN TERMINALS:Ct(nF) REVERSE CURRENT:IR (nA) 1 Ta=-25℃ Ta=150℃ 1000 Ta=75℃ Ta=125℃ 1 0.1 100 Ta=150℃ 0.1 0.01 10 Ta=25℃ Ta=-25℃ 0.001 4.0 5.0 6.0 7.0 8.0 ZENER VOLTAGE:Vz(V) Vz-Iz CHARACTERISTICS 1 1 2 3 4 5 0.01 0 1 2 3 4 5 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 7.0 6.8 6.6 6.4 AVE:6.58V Ta=25℃ IZ=10mA n=30pcs 1000 800 600 400 200 0 Vz DISRESION MAP IR DISRESION MAP Mounted on epoxy bord 1000 TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) IM=10mA IF=0.5A 0.8 CAPACITANCE BETWEENTERMINALS:Ct(nF) Ta=25℃ VR=5V n=30pcs Ta=25℃ f=1MHz VR=0V n=10pcs REVERSE CURRENT:IR(nA) ZENER VOLTAGE:Vz(Ｖ) 0.7 0.6 AVE:0.661nF 6.2 6.0 0.5 AVE:487nA 0.4 Ct DISRESION MAP 30 Rth(j-a) No break at 30kV 25 ELECTROSTATIC DISCHARGE TEST ESD(KV) 20 15 10 5 0 No break at 30kV 1ms time 100 300us 10 Rth(j-c) 1 0.1 0.001 10 TIME:t(s) Rth-t CHARACTERISTICS 0.1 1000 C=200pF R=0Ω C=100pF R=1.5kΩ ESD DISPERSION MAP 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0