RSR025N03

RSR025N03 Transistors 4V Drive Nch MOS FET RSR025N03 Structure Silicon N-channel MOS FET External dimensions (Unit : mm) TSMT3 1.0MAX 2.9 0.4 (3) 0.85 0.7 Features 1) Low on-resistance. 2) Built-in G-S Protection Diode. 3) Small Surface Mount Package (TSMT3) . (1) Gate 1.6 2.8 0~0.1 (1) (2) 0.95 0.95 1.9 0.16 Each lead has same dimensions Abbreviated symbol : QY Application Power switching, DC / DC converter. (2) Source (3) Drain Packaging specifications Package Type RSR025N03 Code Basic ordering unit (pieces) Taping TL 3000 Equivalent circuit (3) (3) (1) ∗1 ∗2 0.3~0.6 (1) (2) Absolute maximum ratings (Ta=25°C) Parameter Drain-source voltage Gate-source voltage Drain current Source current (Body diode) Total power dissipation Channel temperature Storage temperature ∗1 Pw≤100µs, Duty cycle≤2% ∗2 Mounted on a ceramic board. Continuous Pulsed Continuous Pulsed Symbol VDSS VGSS ID IDP ∗1 IS ISP ∗1 PD ∗2 Tch Tstg Limits 30 20 ±2.5 ±10 0.8 3.2 1 150 −55 to 150 Unit V V A A A A W °C °C (2) ∗1 ESD PROTECTION DIODE ∗2 BODY DIODE (1) Gate (2) Source (3) Drain ∗A protection diode is included between the gate and the source terminals to protect the diode against static electricity when the product is in use. Use the protection circuit when the fixed voltages are exceeded. Thermal resistance Parameter Channel to ambient ∗2 Mounted on a ceramic board. Symbol Rth (ch-a) ∗ Limits 125 Unit °C / W Rev.C 1/3 RSR025N03 Transistors Electrical characteristics (Ta=25°C) Parameter Symbol Min. − 30 − 1.0 − − − 1.5 − − − − − − − − − − Typ. − − − − 50 74 83 − 165 55 35 6 10 20 5 2.9 0.8 0.9 Max. 10 − 1 2.5 70 105 118 − − − − − − − − 4.1 − − IGSS Gate-source leakage Drain-source breakdown voltage V(BR) DSS Zero gate voltage drain current IDSS Gate threshold voltage VGS (th) Static drain-source on-state resistance Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Total gate charge Gate-source charge Gate-drain charge ∗Pulsed Unit µA V µA V mΩ S pF pF pF ns ns ns ns nC nC nC Conditions VGS=20V, VDS=0V ID=1mA, VGS=0V VDS=30V, VGS=0V VDS=10V, ID=1mA ID=2.5A, VGS=10V ID=2.5A, VGS=4.5V ID=2.5A, VGS=4V ID=2.5A, VDS=10V VDS=10V VGS=0V f=1MHz ID=1.25A, VDD 15V VGS=10V RL=12.0Ω RG=10Ω VDD 15V VGS=5V ID=2.5A RDS (on) ∗ Yfs Ciss Coss Crss td (on) tr td (off) tf Qg Qgs Qgd ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ Body diode characteristics (Source-Drain) (Ta=25°C) Parameter Forward voltage ∗Pulsed Symbol Min. VSD ∗ − Typ. − Max. 1.2 Unit V Conditions IS=3.2A, VGS=0V Rev.C 2/3 RSR025N03 Transistors Electrical characteristic curves 1000 tf 100 GATE-SOURCE VOLTAGE : VGS (V) 10 SWITCHING TIME : t (ns) Ta=25°C f=1MHz VGS=0V 1000 CAPACITANCE : C (pF) Ta=25°C VDD=15V VGS=10V RG=10Ω Pulsed 10 Ta=25°C 9 VDD=15V ID=2.5A 8 RG=10Ω 7 Pulsed 6 5 4 3 2 1 0 0 1 2 3 4 5 6 Ciss 100 td (off) 10 tr td (on) Coss Crss 10 0.01 0.1 1 10 100 1 0.01 0.1 1 DRAIN-SOURCE VOLTAGE : VDS (V) DRAIN CURRENT : ID (A) TOTAL GATE CHARGE : Qg (nC) Fig.1 Typical Capacitance vs. Drain-Source Voltage Fig.2 Switching Characteristics Fig.3 Dynamic Input Characteristics VDS=10V Pulsed Ta=125°C Ta=75°C Ta=25°C Ta= −25°C STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS (on) (mΩ) 10 500 ID=2.5A ID=1.25A Ta=25°C Pulsed 10 VGS=0V Pulsed DRAIN CURRENT : ID (A) 400 1 SOURCE CURRENT : Is (A) 1 300 0.1 Ta=125°C Ta=75°C Ta=25°C Ta= −25°C 200 0.1 0.01 100 0.001 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 0 2 4 6 8 10 0.01 0.0 0.5 1.0 1.5 GATE-SOURCE VOLTAGE : VGS (V) GATE-SOURCE VOLTAGE : VGS (V) SOURCE-DRAIN VOLTAGE : VSD (V) Fig.4 Typical Transfer Characteristics Fig.5 Static Drain-Source On-State Resistance vs. Gate-Source Voltage Fig.6 Source Current vs. Source-Drain Voltage STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS (on) (mΩ) STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS (on) (mΩ) Ta=125°C Ta=75°C Ta=25°C Ta= −25°C VGS=10V Pulsed Ta=125°C Ta=75°C Ta=25°C Ta= −25°C VGS=4.5V Pulsed STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS (on) (mΩ) 1000 1000 1000 Ta=125°C Ta=75°C Ta=25°C Ta= −25°C VGS=4V Pulsed 100 100 100 10 10 10 1 0.1 1 10 1 0.1 1 10 1 0.1 1 10 DRAIN CURRENT : ID (A) DRAIN CURRENT : ID (A) DRAIN CURRENT : ID (A) Fig.7 Static Drain-Source On-State Resistance vs. Drain Current (Ι) Fig.8 Static Drain-Source On-State Resistance vs. Drain Current (ΙΙ) Fig.9 Static Drain-Source On-State Resistance vs. Drain Current (ΙΙΙ) Rev.C 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1