RSS070P05FU6TB

RSS070P05 Transistor 4V Drive Pch MOS FET RSS070P05 zStructure Silicon P-channel MOS FET zExternal dimensions (Unit : mm) SOP8 5.0 1.75 0.4 (5) (1) (4) 1pin mark 0.4Min. 3.9 6.0 zFeatures 1) Built-in G-S Protection Diode. 2) Small and Surface Mount Package (SOP8). (8) 0.2 1.27 zApplications Power switching , DC / DC converter , Inverter Each lead has same dimensions zPackaging dimensions Package Taping TB Code Type Basic ordering unit (pieces) 2500 RSS070P05 zAbsolute maximum ratings (Ta=25°C) Parameter Drain-source voltage Gate-source voltage Drain current Source current (Body diode) Continuous Pulsed Continuous Pulsed Total power dissipation Chanel temperature Range of Storage temperature zEquivalent circuit Symbol Limits VDSS -45 VGSS ±20 ID ±7.0 IDP *1 ±28 IS -1.6 ISP *1 -28 PD *2 2 Tch 150 Tstg -55 to +150 Unit V V A A A A W o C o C (8) (7) (6) (5) ∗2 ∗1 (1) (2) (3) ∗1 ESD PROTECTION DIODE ∗2 BODY DIODE (4) (1) Source (2) Source (3) Source (4) Gate (5) Drain (6 )Drain (7) Drain (8) Drain *1 PW≤10µｓ、Duty cycle≤1% *2 Mounted on a ceramic board zThermal resistance Parameter Chanel to ambient Symbol Rth(ch-a) * Limits 62.5 Unit o C/W * Mounted on a ceramic board 1/4 RSS070P05 Transistor zElectrical characteristics (Ta=25°C) Parameter Symbol Min. Gate-source leakage IGSS − Drain-source breakdown voltage V(BR) DSS −45 Zero gate voltage drain current − IDSS Gate threshold voltage VGS (th) −1.0 − Static drain-source on-state − RDS (on)∗ resistance − Forward transfer admittance Yfs ∗ 10.0 − Input capacitance Ciss Output capacitance − Coss − Reverse transfer capacitance Crss − Turn-on delay time td (on) ∗ − Rise time tr ∗ − Turn-off delay time td (off) ∗ − Fall time tf ∗ − Total gate charge Qg ∗ − Gate-source charge Qgs ∗ − Gate-drain charge Qgd ∗ Typ. − − − − 19 25 28 − 4100 510 330 31 35 135 50 34.0 9.5 12 Max. ±10 − −1 −2.5 27 35 39 − − − − − − − − 47.6 − − Unit µA V µA V mΩ mΩ mΩ S pF pF pF ns ns ns ns nC nC nC Conditions VGS=±20V, VDS=0V ID= −1mA, VGS=0V VDS= −45V, VGS=0V VDS= −10V, ID= −1mA ID= −7A, VGS= −10V ID= −7A, VGS= −4.5V ID= −7A, VGS= −4.0V VDS= −10V, ID= −7A VDS= −10V VGS=0V f=1MHz VDD −25V ID= −3.5A VGS= −10V RL=−7Ω RG=10Ω VDD −25V VGS= −5V ID= −7A RL=3.5Ω RG=10Ω Min. Typ. Max. − − −1.2 Unit V IS= −7A, VGS=0V ∗Pulsed Body diode characteristics (Source-Drain) Parameter Forward voltage Symbol VSD ∗ Conditions ∗Pulsed 2/4 RSS070P05 Transistor zElectrical characteristic curves 10 1000 100 0.1 0.01 1.0 1.5 2.0 2.5 3.0 10 1 0.01 3.5 100 10 1 10 0.01 1 10 Fig.3 Static Drain-Source On-State Resistance vs. Drain Current (2) 200 10 Ta=25oC pulsed 10 VGS=0V pulsed 150 o Source Current : -Is [A] Static Drain-Source On-State Resistance RDS(on) [mΩ] Ta=125oC 75oC 25oC -25oC 100 0.1 Drain Current : -ID [A] Fig.2 Static Drain-Source On-State Resistance vs. Drain Current (1) 1000 VGS= -4V pulsed Ta=125oC 75oC 25oC -25oC Drain Current : -ID [A] Fig.1 Typical Transfer Characteristics 100 ID= -7.0A 50 Ta=125 C 75oC 25oC -25oC 1 0.1 ID= -3.5A 1 0.01 0 0.1 1 10 0 5 Drain Current : -ID [A] 10 15 0.01 0.0 Fig.4 Static Drain-Source On-State Resistance vs. Drain Current (3) 10000 Fig.5 Static Drain-Source On-State Resistance vs. Gate-Source Voltage Coss Crss Ta=25oC f=1MHz VGS=0V Switching Time : t [ns] Ciss 1000 100 Fig.6 Source-Current vs. Source-Drain Voltage RG=10Ω Pulsed td(on) tr 8 7 RG=10Ω Pulsed 6 5 4 3 2 1 10 0 1 0.1 Ta=25oC VDD= -25V ID= -7.0A 9 td(off) 10 1.5 10 Ta=25oC VDD= -25V VGS= -10V tf 1000 1.0 Source-Drain Voltage : -VSD [V] 10000 100 0.5 Gate-Source Voltage : -VGS [V] Gate-Source Voltage : -VGS [V] Static Drain-Source On-State Resistance RDS(on) [mΩ] VGS= -4.5V pulsed 1 0.1 Gate-Source Voltage : -VGS [V] Capacitance : C [pF] Static Drain-Source On-State Resistance RDS(on) [mΩ] Ta=125oC 　　　75oC 　　　25oC 　　-25oC 1 1000 Ta=125oC 75oC 25oC -25oC VGS= -10V pulsed Static Drain-Source On-State Resistance RDS(on) [mΩ] Drain Currnt : -ID [A] VDS= -10V pulsed 1 10 100 Drain-Source Voltage : -VDS [V] Fig.7 Typical capacitance vs. Source-Drain Voltage 0.01 0.1 1 10 Drain Current : -ID [A] Fig.8 Switching Characteristics 0 10 20 30 40 50 60 70 Total Gate Charge : Qg [nC] Fig.9 Dynamic Input Characteristics 3/4 RSS070P05 Transistor zMeasurement circuits VGS ID VDS VGS 10% 90% RL 90% D.U.T. 90% RG VDD VDS 10% td(on) 10% td(off) tr ton tr toff Fig.11 Switching Time Waveforms Fig.10 Switching Time Test Circuit VG VGS ID VDS RL IG (Const.) D.U.T. Qg VGS Qgs RG Qgd VDD Charge Fig.12 Gate Charge Test Circuit Fig.13 Gate Charge Waveform 4/4 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1