RUE003N02

RUE003N02 Transistor 1.8V Drive Nch MOSFET RUE003N02 Structure Silicon N-channel MOSFET Dimensions (Unit : mm) EMT3 Applications Switching Features 1) Low on-resistance. 2) Fast switching speed. 3) Low voltage drive (1.8V) makes this device ideal for portable equipment. 4) Drive circuits can be simple. 5) Parallel use is easy. (1)Source (2)Gate (3)Drain Abbreviated symbol : QT Packaging specifications Package Type Code Basic ordering unit (pieces) RUE003N02 Taping TL 3000 Equivalent circuit Drain Gate ∗2 Absolute maximum ratings (Ta=25°C) Parameter Drain-source voltage Gate-source voltage Drain current Continuous Pulsed Total power dissipation Channel temperature Range of storage temperature Symbol VDSS VGSS ID IDP∗1 PD∗2 Tch Tstg Limits 20 ±8 ±300 ±600 150 150 −55 to +150 Unit V V mA mA mW °C °C ∗1 Source ∗1 ESD PROTECTION DIODE ∗2 BODY DIODE ∗1 Pw≤10µs, Duty cycle≤1% ∗2 Each terminal mounted on a recommended land Thermal resistance Parameter Channel to ambient ∗ Each terminal mounted on a recommended land Symbol Rth(ch-a) ∗ Limits 833 Unit °C / W Rev.A 1/3 RUE003N02 Transistor Electrical characteristics (Ta=25°C) Parameter Gate-source leakage Drain-source breakdown voltage Zero gate voltage drain current Gate threshold voltage Static drain-source on-state resistance Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time ∗ Pulsed Symbol IGSS V(BR)DSS IDSS VGS(th) ∗ RDS(on) |Yfs| ∗ Ciss Coss Crss td(on) ∗ tr ∗ td(off) ∗ tf ∗ Min. − 20 − 0.3 − − − 400 − − − − − − − Typ. − − − − 0.7 0.8 1.0 − 25 10 10 5 10 15 10 Max. 10 − 1.0 1.0 1.0 1.2 1.4 − − − − − − − − Unit µA V µA V Ω Ω Ω ms pF pF pF ns ns ns ns Conditions VGS=±8V, VDS=0V ID=1mA, VGS=0V VDS=20V, VGS=0V VDS=10V, ID=1mA ID=300mA, VGS=4.0V ID=300mA, VGS=2.5V ID=300mA, VGS=1.8V ID=300mA, VDS=10V VDS=10V VGS=0V f=1MHz ID=150mA, VDD VGS=4.0V RL=67Ω RG=10Ω 10V Body diode characteristics (Source-drain) (Ta=25°C) Parameter Forward voltage ∗ Pulsed Symbol VSD ∗ Min. − Typ. − Max. 1.2 Unit V Conditions IS= 100mA, VGS=0V Electrical characteristic curves STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on) (mΩ) STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on) (mΩ) 1 VDS=10V Pulsed 10 VGS=4V Pulsed 10 VGS=2.5V Pulsed DRAIN CURRENT : ID (A) 0.1 0.01 Ta=125°C 75°C 25°C −25°C Ta=125°C 75°C 25°C −25°C 1 Ta=125°C 75°C 25°C −25°C 1 0.001 0.0001 0.00001 0.0 0.5 1.0 1.5 0.1 0.01 0.1 DRAIN CURRENT : ID (A) 1 0.1 0.01 0.1 DRAIN CURRENT : ID (A) 1 GATE-SOURCE VOLTAGE : VGS (V) Fig.1 Typical transfer characteristics Fig.2 Static drain-source on-state resistance vs. drain current (Ι) Fig.3 Static drain-source on-state resistance vs. drain current (ΙΙ) Rev.A 2/3 RUE003N02 Transistor 10 VGS=1.8V Pulsed 100 1 STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on) (mΩ) VGS=0V Pulsed SOURCE CURRENT : IS (A) CAPACITANCE : C (pF) Ta=125°C 75°C 25°C −25°C 1 Ta=25°C f=1MHZ VGS=0V 0.1 Ta=125°C 75°C 25°C −25°C Ciss 10 Crss Coss 0.1 0.01 0.1 DRAIN CURRENT : ID (A) 1 0.01 0.0 0.5 1 1.5 1 0.01 0.1 1 10 100 SOURCE-DRAIN VOLTAGE : VSD (V) DRAIN-SOURCE VOLTAGE : VDS (V) Fig.4 Static drain-source on-state resistance vs. drain current (ΙΙΙ) Fig.5 Source current vs. source-drain voltage Fig.6 Typical capacitance vs. drain-source voltage 1000 SWITHING TIME : t (ns) Ta=25°C VDD=10V VGS=4V RG=10Ω Pulsed 100 10 td(off) tf td(on) tr 1 0.01 0.1 DRAIN CURRENT : ID (A) 1 Fig.7 Switching characteristics Switching characteristics measurement circuit Pulse width ID VDS D.U.T. RL VGS VGS VDS 50% 10% 10% 90% 50% RG 10% 90% 90% td (off) tf toff VDD td (on) ton tr Fig.8 Switching time measurement circuit Fig.9 Switching time waveforms Rev.A 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0