RZF030P01

1.5V Drive Pch MOSFET RZF030P01 Structure Silicon P-channel MOSFET Dimensions (Unit : mm) TUMT3 Features 1) Low on-resistance. 2) High power package. 3) Low voltage drive. (1.5V) (1) Gate (2) Source (3) Drain Abbreviated symbol : YD Applications Switching Packaging specifications Package Type RZF030P01 Code Basic ordering unit (pieces) Taping TL 3000 Equivalent circuit (3) (1) ∗1 ∗2 (2) ∗1 ESD PROTECTION DIODE ∗2 BODY DIODE (1) Gate (2) Source (3) Drain Absolute maximum ratings (Ta=25°C) Parameter Drain-source voltage Gate-source voltage Drain current Source current (Body diode) Continuous Pulsed Continuous Pulsed Symbol VDSS VGSS ID IDP ∗1 IS ∗1 ISP PD ∗2 Tch Tstg Limits −12 ±10 ±3 ±12 −0.65 −12 0.8 150 −55 to +150 Unit V V A A A A W °C °C Total power dissipation Channel temperature Range of Storage temperature ∗1 Pw≤10µs, Duty cycle≤1% ∗2 Mounted on a ceramic board Thermal resistance Parameter Channel to ambient ∗ Mounted on a ceramic board. Symbol Rth(ch-a) ∗ Limits 156 Unit °C / W www.rohm.com c ○ 2009 ROHM Co., Ltd. All rights reserved. 0.2Max. 1/5 2009.01 - Rev.A RZF030P01 Electrical characteristics (Ta=25°C) Parameter Symbol Min. Typ. − − − − 28 39 51 72 − 1860 210 200 9 40 210 120 18 3.0 2.5 Max. ±10 − −1 −1.0 39 54 76 144 − − − − − − − − − − − − IGSS Gate-source leakage Drain-source breakdown voltage V(BR) DSS −12 Zero gate voltage drain current − IDSS Gate threshold voltage VGS (th) −0.3 − − Static drain-source on-state ∗ RDS (on) resistance − − 5 Forward transfer admittance Yfs ∗ Input capacitance − Ciss Output capacitance − Coss Reverse transfer capacitance − Crss Turn-on delay time − td (on) ∗ Rise time − tr ∗ Turn-off delay time − td (off) ∗ Fall time − tf ∗ Total gate charge − Qg ∗ Gate-source charge − Qgs ∗ Gate-drain charge − Qgd ∗ ∗Pulsed Data Sheet Unit µA V µA V mΩ mΩ mΩ mΩ S pF pF pF ns ns ns ns nC nC nC Conditions VGS=±10V, VDS=0V ID= −1mA, VGS=0V VDS= −12V, VGS=0V VDS= −6V, ID= −1mA ID= −3A, VGS= −4.5V ID= −1.5A, VGS= −2.5V ID= −1.5A, VGS= −1.8V ID= −0.6A, VGS= −1.5V VDS= −6V, ID= −3A VDS= −6V VGS=0V f=1MHz ID= −1.5A VDD −6V VGS= −4.5V RL 4Ω RG=10Ω VDD −6V RL 2Ω ID= −3A RG=10Ω VGS= −4.5V Body diode characteristics (Source -drain) (Ta=25°C) Parameter Forward voltage ∗Pulsed Symbol VSD ∗ Min. − Typ. − Max. −1.2 Unit V Conditions IS= −3A, VGS=0V www.rohm.com c ○ 2009 ROHM Co., Ltd. All rights reserved. 2/5 2009.01 - Rev.A RZF030P01 Electrical characteristic curves 10 DRAIN CURRENT : -ID [A] DRAIN CURRENT: - ID [A] VGS= - 10V VGS= - 4.5V VGS= - 1.8V 5 VGS= - 1.4V VGS= - 1.2V VGS= - 1.0V 0 0.0 2.0 4.0 6.0 8.0 10.0 0 0.0 0.2 0.4 0.6 0.8 Ta=25℃ pulsed VGS= - 1.6V 10 VGS= - 10V DRAIN CURRENT : -ID [A] VGS= - 4.5V VGS= - 2.4V Ta=25℃ pulsed VGS= - 1.8V VGS= - 1.6V 5 VGS= - 1.4V VGS= - 1.2V VGS= -1.0V 1.0 10 VDS= - 6V pulsed Data Sheet 1 Ta=125℃ Ta=75℃ 0.1 Ta=25℃ Ta=-25℃ 0.01 0.001 0.0 0.5 1.0 1.5 DRAIN-SOURCE VOLTAGE : -VDS [V] Fig.1 Typical Output Characteristics (Ι) DRAIN-SOURCE VOLTAGE : -VDS [V] Fig.2 Typical Output Characteristics (Ⅱ) GATE-SOURCE VOLTAGE: - VGS [V] Fig.3 Typical Transfer Characteristics 1000 STATIC DRAIN-SOURCE ONSTATE RESISTANCE : RDS(on) [mΩ] STATIC DRAIN-SOURCE ONSTATE RESISTANCE : RDS(on) [mΩ] Ta=25℃ pulsed VGS= - 1.5V VGS= - 1.8V VGS= - 2.5V VGS= - 4.5V 250 200 150 100 50 0 ID= - 1.5A ID= - 3.0A STATIC DRAIN-SOURCE ONSTATE RESISTANCE: RDS(on) [mΩ] Ta=25℃ pulsed 1000 VGS= - 4.5V pulsed Ta=125℃ Ta=75℃ Ta=25℃ Ta=-25℃ 100 100 10 0.01 0.1 1 DRAIN CURRENT : - ID [A] 10 0 2 4 6 8 10 10 0.01 GATE-SOURCE CURRENT : -VGS [V] 0.1 1 DRAIN CURRENT : - ID [A] 10 Fig.4 Static Drain-Source On-State Resistance vs.Drain Current 　 Fig.5 Static Drain-Source On-State Resistance vs.Gate-Source Voltage Fig.6 Static Drain-Source On-State Resistance vs.Drain Current 1000 STATIC DRAIN-SOURCE ONSTATE RESISTANCE : RDS(on) [mΩ] STATIC DRAIN-SOURCE ONSTATE RESISTANCE : RDS(on) [mΩ] 100 Ta=125℃ Ta=75℃ Ta=25℃ Ta=-25℃ STATIC DRAIN-SOURCE ONSTATE RESISTANCE : RDS(on) [mΩ] VGS= - 2.5V pulsed 1000 VGS= - 1.8V pulsed 1000 Ta=125℃ Ta=75℃ Ta=25℃ Ta=-25℃ VGS= - 1.5V pulsed Ta=125℃ Ta=75℃ Ta=25℃ Ta=-25℃ 100 100 10 0.01 0.1 1 10 10 0.01 0.1 1 10 10 0.01 0.1 1 10 DRAIN CURRENT : - ID [A] Fig.7 Static Drain-Source On-State Resistance vs. Drain Current DRAIN CURRENT : - ID [A] Fig.8 Static Drain-Source On-State Resistance vs. Drain Current DRAIN CURRENT : - ID [A] Fig.9 Static Drain-Source On-State Resistance vs. Drain Current www.rohm.com c ○ 2009 ROHM Co., Ltd. All rights reserved. 3/5 2009.01 - Rev.A RZF030P01 10 SOURCE CURRENT : - Is [A] 100 VGS=0V pulsed FORWARD TRANSFER ADMITTANCE : Yfs [S] 10 VDS= - 6V pulsed CAPASITANCE : C [pF] 10000 Data Sheet Ciss 1000 1 Coss 0.1 Ta=125℃ Ta=75℃ Ta=25℃ Ta=-25℃ 1 Ta=125℃ Ta=75℃ Ta=25℃ Ta=-25℃ 100 Ta=25℃ f=1MHz VGS=0V 0.01 0.1 Crss 0.01 0.0 0.5 1.0 1.5 0.1 0.01 10 0.1 1 10 1 10 100 SOURCE DRAIN VOLTAGE : - VSD [V] Fig.10 Source Current vs. Source-Drain Voltage DRAIN CURRENT : - ID [A] Fig.11 Forward Transfer Admittance vs. Drain Current DRAIN-SOURCE VOLTAGE : -VDS [V] Fig.12 Typical Capacitance vs. Drain-Source Voltage GATE-SOURCE VOLTAGE : -VGS [V] 10000 SWITCHING TIME : t [ns] 1000 tf td(off) Ta=25℃ VDD=-6V VGS= - 4.5V RG=10Ω Pulsed 4 3 Ta=25℃ VDD= - 6V ID= - 3A RG=10Ω Pulsed 100 td(on) 10 tr 1 0.01 0.1 1 10 DRAIN CURRENT : -ID [A] Fig.13 Switching Characteristics 2 1 0 0 5 10 15 20 TOTAL GATE CHARGE : Qg [nC] Fig.14 Dynamic Input Characteristics www.rohm.com c ○ 2009 ROHM Co., Ltd. All rights reserved. 4/5 2009.01 - Rev.A RZF030P01 Measurement circuits Data Sheet Pulse Width VGS ID RL D.U.T. VDS VGS 10% 50% 10% 90% 50% 10% 90% RG VDD VDS td(on) ton 90% tr td(off) toff tf Fig.1-1 Switching Time Measurement Circuit Fig.1-2 Switching Waveforms VG ID VGS RL IG(Const.) RG D.U.T. VDD VDS VGS Qgs Qg Qgd Charge Fig.2-1 Gate Charge Measurement Circuit Fig.2-2 Gate Charge Waveforms Notice This product might cause chip aging and breakdown under the large electrified environment. Please consider to design ESD protection circuit. www.rohm.com c ○ 2009 ROHM Co., Ltd. All rights reserved. 5/5 2009.01 - Rev.A Appendix Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM CO.,LTD. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2009 ROHM Co.,Ltd. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster @ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix-Rev4.0